Top Brass Pipe Fitting

Brass Barb Union Fittings LIONMAX Barb Splicer Mender Hose Fittings 4 PCS 1/4 Inch to 1/4 Inch Barb Hose ID with 8 Hose Clamps for Air/Water/Fuel/Oil

  • 【SOLID BRASS MATERIAL】Barb fitting is made of brass. Strong and durable, not easy to rust and corrode. Has a long service life. NOTE: Brass barb hose fitting is not suitable for potable water..
  • 【-65~250°F 150PSI】Hose barb fitting has strong temperature resistance and good pressure resistance. So barb union splicer fitting is often used for water, fuel, oil delivery..
  • 【PACKAGE CONTAINS】1/4'' hose ID barb fitting (4 PCS) + 304 stainless steel hose clamp (8 PCS). You don't need to buy additional accessories..
  • 【TIGHT CONNECTION】1/4 inch ID hose barb fitting is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed hose splicer not easy to leak during the connection process..
  • 【WIDE APPLICATION】Brass barb hose fitting is suitable for pipe repair. Various hoses can be connected to 1/4'' hose ID hose barb fittings. Meet your multiple needs..
Check Stock

Dagan Industries Black Steel Ash Brush and Cast Iron Shovel - 11.5 inch

  • Solid Brass 90 Degree Fitting for Alumcon..
  • 90 Degree Fitting for Alumcon Solid Brass.
  • 3/8" Male Flare x 1/2" Female Pipe Thread.
Check Stock

U.S Solid Brass Hose Fitting Adapter 3/4 Barb x 3/4 NPT Male Pipe Fittings

  • FUNCTION - This 3/4" Barb x 3/4" NPT brass fitting is an adapter for connecting a hose to a male threaded pipe. Hose barb on one end and male NPT threads on the other..
  • DURABLE - As a solid and sturdy material, brass is perfect for hose systems as it can withstand long periods of wear and tear..
  • THREAD - High quality and deep threads allow the fittings to bite better, not easy to slip..
  • MEDIUM - This pipe fitting can apply to water, air, gas, oil and fuel..
  • WARNING - This product can expose you to chemicals including lead(~2.85%), which is not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

U.S. Solid Brass Hose Fitting, Adapter, 1/4\ Barb x 1/4\ NPT Male Pipe Fittings

  • FUNCTION - This 1/4" Barb x 1/4" NPT brass fitting is an adapter for connecting a hose to a male threaded pipe. Hose barb on one end and male NPT threads on the other..
  • DURABLE - As a solid and sturdy material, brass is perfect for hose systems as it can withstand long periods of wear and tear..
  • THREAD - High quality and deep threads allow the fittings to bite better, not easy to slip..
  • MEDIUM - This pipe fitting can apply to water, air, gas, oil and fuel..
  • WARNING - This product can expose you to chemicals including lead(~2.85%), which is not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Brass Barb Reducer Fittings LIONMAX 1 to 3/4 Barb Hose ID Hose Barb Splicer Mender with 4 Hose Clamps for Air/Water/Fuel 2 PCS

  • 【WITH HOSE CLAMPS】1'' to 3/4'' Hose barb reducer is suitable for connecting 1 inch ID hose to 3/4 inch ID hose. The package contains barb splicer reducer 2 PCS and 304 stainless steel hose clamp 4 PCS (size can adjust). You don't need to buy additional accessories..
  • 【-65~250°F 150PSI】Brass barb reducer fitting has strong temperature resistance and good pressure resistance. So barb hose reducer is often used for water, fuel, oil delivery..
  • 【SOLID BRASS MATERIAL】Barb splicer reducer is made of brass. Strong and durable, not easy to rust and corrode. Hose barb fitting has a long service life. NOTE: Brass barb reducer fitting is not suitable for potable water..
  • 【WIDE APPLICATION】Barb hose reducer is suitable for pipe repair. Various hoses can be connected to this 1 inch to 3/4 inch ID hose barb fitting. Meet your multiple needs..
  • 【TIGHT CONNECTION】This brass barb reducer is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed splicer reducer fitting not easy to leak during the connection process..
Check Stock

Beduan Brass Compression Fitting, Insert Tube Support Compression Sleeve Fitting 1/4\ Tube ID (Pack of 10)

  • ...ade of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
  • ✅[FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube or hard plastic tubing.....
Check Stock

Hilitchi 8Sizes Tube OD 4mm-16mm Brass Compression Sleeves Ferrules Compression Fitting Kit Metric 220Pcs

  • ...de of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
  • ✅ [FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅ [HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅ [APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube or hard plastic tubin....
Check Stock

Hilitchi 3Sizes Tube OD 1/4 5/16 3/8 Brass Compression Sleeves Ferrules Compression Fitting Kit (SAE, 105Pcs)

  • ...ade of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
  • ✅[FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube or hard plastic tubing.....
Check Stock

BELEY 1/2 Inch & 3/4 Inch Olive Remover Puller Tool Removal Tool Solid Brass Copper Pipes Fitting Compression Fittings Thread Tool Puller Metric Handle Nut

  • US 1/2 Inch & 3/4 Inch Ferrule Removal Tool: The olive puller is suitable for any solid brass pipe fittings with a diameter of 15mm and 22mm. Solid....
  • Main Function: The olive puller uses a compression fitting to lock the nut, and takes out the used or damaged olive from the copper pipe without....
  • High-Quality: The copper pipe fittings are made of solid brass. The high-quality brass makes the product sturdy and durable, with high strength, high....
  • Easy to Use: The olive removal tool can remove most olives and can also increase torque, which is appropriate for various tasks. And the operation is....
  • After Sales Service: We provide 7X24h service. If you have any questions about this brass tube, please feel free to reach us via email..
Check Stock

ECUDIS 10 PCS Lamp Pipe Brass Coupling 0.6 Inch Long 1/8 IP for Lamp Rod and Light Fixture Assemlby or Repair Lamp Tube Threaded Locknuts

  • 0.6 Inch fitting to connect two separate threaded rods or pipes..
  • Fits 1/8 IP standard lamp pipe, hardware DIY repair part..
  • Brass material makes the lamp pipe connection duralble and antirusting.
  • ECUDIS makes and sells easy to use products, if you have any questions please contact us..
Check Stock

Brass 1/4 Barb X 1/4 NPT Male End Air Hose Pipe Fitting Threaded Connector Adapter Pack of 12

  • ✅ Function -- Barb head for connecting hoses, NPT end used to connect NPT pipes. Air hose pipe can apply to water, gas, oil and fuel as well as air tools..
  • ✅ Premium material -- Brass barbed hose fitting is made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion. Solid brass hose barb can withstand up to 100 °C (212 °F)..
  • ✅ Durable -- Air hose fittings is not a cast product and has a thick wall, providing a longer service life than iron and iron galvanized pipe fittings..
  • ✅ Superior threads -- Deeper and smoother threads with barbed edges provide effective connection..
  • ✅ CUSTOMER SERVICE -- Professional factories produce brass air line fittings. Every detail reflects a strong texture performance. Fast Delivery and 30 Days Free Refund..
Check Stock

Tecmolog Brass Pipe Fittings Connector G 1/2 Female Thread (Metric BSP) to US 1/2 NPT Male Thread Pipe Fitting Converter Adapter, SBA037

  • BSP to NPT Adapter: Metric BSP 1/2" (G) female to NPT 1/2" male pipe fitting converter, easily change from standard EU metric to US inches.
  • Brass Pipe Fittings 1/2: This adapter is made of brass for resistance to corrosion, ductility at high temperatures, and low magnetic permeability.
  • Rubber Washers and Teflon Tape for a Perfect Seal: Come with an o-ring for the G1/2 side and the 1/2 " NPT side to produce a leak free connection.
  • Connect Hoses or Fittings of US plumbing: This is used to adapt the plumbing to NPT on bath or kitchen fixture, and European hose fittings.
  • Easy to Install: It has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench.
Check Stock