Top Brass Pressure Regulator

Yumpanda RV Water Pressure Regulator with Gauge,Adjustable Brass Lead-Free Water Hose Pressure Regulator with Stainless Screened Filter for Travel Trailers and RV Camper

  • 【RV water pressure be adjusted at will】Your RV is no longer affected by high water pressure.Yumpanda rv water pressure regulator helps you regulate your RV water pressure to a stable range(0-160Psi) for showering, dish washing, and other purposes! Water pressure is controlled by adjusting the top screw with a screwdriver, rotating clockwise to increase pressure and counterclockwise to decrease pressure..
  • 【High quality brass】Our water pressure regulator for rv camper is made of 100% brass, and made with a lead-free process.The lead content is less than 0.13%, well below the NSF lead free requirement of 0.25%.100% safe and healthy, no harm to human body.The chromium on the surface provides effective wear and corrosion resistance,allowing the regulator to last longer without wearing out..
  • 【Upgraded water pressure gauge】Equipped with an upgraded version of the pressure gauge. The gauge is made of stainless steel and contains silicone oil inside, which reduces the friction of the internal parts to effectively extend the life of the water pressure regulator . The dial is clearly printed, so you can clearly see the water pressure in the RV at the moment and adjust it to the right range..
  • 【Water source free of impurities】The filter is provided a....
Check Stock

H.A.K. PNEUMATIC Air Filter Regulator – ½” NPT Poly Bowl Compressed Air, Water Filter Lubricator Combo | Water/Oil Trap Separator | 0-140PSI | 2 Micron Brass Element

  • PRESSURE REGULATOR: The speed and precision of air flow are controlled by a Regulator, while the air that passes from the Compressor is cleaned by an Air Filter. The Two Brass pipe fitting available..
  • EFFECTIVE AIR FILTER: H.A.K. PNEUMATIC Air Compressor Regulator Filters the moisture and tiny particles from the air to preserve air tools including spray guns, nailers, airbrushes, tyre compressors, inflators, and pneumatic equipment. The air flow direction has mentioned in the images. Air in from Left side and get out from right side..
  • EASY TO INSTALL This Pressure gauge comes with Good Impact Locking Composite Knob Inlet Outlet Port to Indicate Position Circulation. Compressed Air Gas Water Filter also have Two 1/2" Brass Pipe Fitting Straight Connector Adapters and Tread seal Teflon tape..
  • AUTO LUBRICATION & PRESSURE RANGE: The lubricator plate allows atomized oil to be delivered to lubricant air tools to improve durability and work efficiency. The Pressure range of our Pressure Regulator is 0~140PSI & Rated flow is 500L/MIN. There is an option of adjusting the air pressure..
  • CUSTOMER'S SATISFACTION: We guarantee everything we make. Our Primary Priority here at H.A.K. PNEUMATIC is your happiness &100% Satisfaction, which means we stand by our Air Filter....
Check Stock

Uniweld RHP400 Nitrogen Regulator with 0-400 PSI Delivery Pressure, CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection

  • Nitrogen Regulator, Delivery Pressure 0-400 PSI.
  • CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.
  • Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system).
  • Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
  • Regulator can be used with CO2 with the Uniweld part no F36 adaptor, CO2 Cylinder (CGA320) to Nitrogen Regulator (CGA580) (purchased separately).
Check Stock

Uniweld RHP500 Nitrogen Regulator with 0-500 PSI Delivery Pressure CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection

  • Nitrogen Regulator, Delivery Pressure 0-500 PSI.
  • CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.
  • Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system).
  • Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
  • Regulator can be used with CO2 with the Uniweld part no F36 adaptor, CO2 Cylinder (CGA320) to Nitrogen Regulator (CGA580) (purchased separately).
Check Stock

Camco (40055) RV Brass Inline Water Pressure Regulator- Helps Protect RV Plumbing and Hoses from High-Pressure City Water

  • RV Pressure Regulator: RV water pressure regulator is designed to protect RV and boat appliances, plumbing fixtures, and hoses from high-pressure city water.
  • Efficient Design: Camper water pressure regulator reduces water pressure to a safe and consistent 40-50 PSI.
  • Safe and Secure: Water regulator for RV and camper is made of durable lead-free, drinking-water-safe brass.
  • Compatible With: RV pressure regulator attaches easily with 3/4-inch garden hose threads.
  • female garden hose (3/4-inch-11.5 NH) x male garden hose (3/4-inch-11.5 NH).
  • Quality Products: Camco makes quality products for RVing, boating, camping, towing, tailgating, and grilling that help take your passion for the outdoors to the next level.
Check Stock

Propane Regulator, High Pressure, Adjustable 0-60 lbs

  • MEGR-1122H-AAJ High Pressure 10 PSI First Stage Regulator (1/4" Inlet x 1/2" Outlet) 1,000,000 BTU Capacity.
  • MEGR-1652-CFF Low Pressure 11" Water Column Backmount 90 Degree Second Stage Regulator (1/2" Inlet x 3/4" Outlet) 1,000,000 BTU Capacity.
  • POL x 1/4" Pigtail to connect between the propane tank and the first stage high pressure regulator.
Check Stock

RV Water Pressure Regulator Valve, Brass Lead-Free Adjustable RV Water Pressure Reducer, with 160 PSI Gauge and Inlet Screened Filter 3/4” NH Threads, for RV Camper Travel Trailer Outdoor by Hydencamm

  • [Easy Adjustment] Adjustable water pressure settings, you can easily adjust the required water pressure with a screwdriver to help protect your RV system, water pipes, water tanks and filters..
  • [Safe Use] The adjustable water pressure reducer is made of lead-free brass, and each regulator has been tested. The lead content is less than 0.13%, which is far below the 0.25% lead-free requirement of NSF..
  • [Convenient Cleaning] The water pressure regulator adopts a detachable valve core, which is easy to clean and replace. The double inlet filter is designed to filter gravel to prevent clogging by impurities..
  • [Wide Compatibility] The brass lead-free water pressure reducer is suitable for 3/4" outdoor hose threads and NH threads, compatible with all American water supply systems..
  • [Powerful Function] Adjustable water pressure regulator with pressure gauge can display the pressure value intuitively. It is an essential accessory for RV, travel trailers and campers. If there is any dissatisfaction with regulator, we will solve your question within 24 hours..
Check Stock

IMAGE® Welding Gas Welder Oxygen Regulator Gauges Oxy for Victor Torch Cutting Kits CGA 540

  • This handy oxygen regulator easily replaces the worn out regulator in your welding kit! An ideal item to have on hand for any welder..
  • High Quality Oxygen Regulator includes 2" diameter gauges and one valve to displays accurate pressure..
  • Inlet(CGA-540) pressure range: 0-4000 psi.
  • Regulator body is constructed of forged brass.durable and reliable to use.An T adjustment handle makes it easy to adjust pressure by hand..
  • Wide Use:Designed for heavy-duty applications where high outlet pressure is required.Such as Cutting and welding..
Check Stock

GasOne 50200+2109 Gas ONE High Pressure Cast-Iron Round Burner Head with Brass Fitting O, Black

  • Includes - cast iron high pressure burner head and 0-20 psi high Pressure regulator and 4 ft hose.
  • Universal replacement burner - With our gas one burner head, you can use it with high pressure or low pressure regulators (high pressure regulator is recommended for high output).
  • Brass fitting orifice Block - includes brass fitting orifice Block & air Shutter and spring.
  • Heat resistant - cast iron will not melt easily compared to aluminum construction.
Check Stock

GasOne 50250+2109 Gas ONE High Pressure Cast-Iron Burner Head with Brass Fitting Orifice

  • Includes - Cast Iron high pressure burner head and 0-20 psi high Pressure regulator and 4 ft hose.
  • Universal replacement burner - With our gas one burner head, you can use it with high pressure or low pressure regulators (high pressure regulator is recommended for high output).
  • Brass fitting orifice Block - includes brass fitting orifice Block & air Shutter and spring.
  • Heat resistant - Cast Iron will not melt easily compared to aluminum construction.
  • Note: Image 3 accessories: Those parts come pre-installed for customer’s conveniences.
Check Stock

Camco 22700 Heavy-Duty Flexible Hose Protector with Gripper - Eliminates Hose Crimping at The Faucet - Compatible with All Standard Garden Hoses and Faucets

  • RV Pressure Regulator: RV water pressure regulator is designed to protect RV and boat appliances, plumbing fixtures, and hoses from high-pressure city water.
  • Efficient Design: Camper water pressure regulator reduces water pressure to a safe and consistent 40-50 PSI.
  • Safe and Secure: Water regulator for RV and camper is made of durable lead-free, drinking-water-safe brass.
  • Compatible With: RV pressure regulator attaches easily with 3/4-inch garden hose threads.
  • female garden hose (3/4-inch-11.5 NH) x male garden hose (3/4-inch-11.5 NH).
  • Quality Products: Camco makes quality products for RVing, boating, camping, towing, tailgating, and grilling that help take your passion for the outdoors to the next level.
Check Stock

CO2 Secondary Regulator with 5/16 outlet barb Beer gas Regulator 0-60PSI for Home Brewing Beer Keg Kegging GWENBHMTOOL

  • Include: 1*CO2 Secondary Regulator with Single Barb and Chrome-plated brass body..
  • Function: The secondary CO2 key beer regulator can be used when barrels with different pressure requirements under the same CO2 tank..
  • Use: When using CO2 pressure regulator, you will still need a primary regulator with one output that connects to the secondary with a piece of airline..
  • Security: The single gauge secondary regulator features a manual pressure release valve and an internal pressure relief valve that releases pressure at 55-65 PSI to help ensure safety..
  • Service: If you have any question don't hesitate to contact us. We will reply you promptly and patiently within 24 hours. Your satisfaction is our goal..
Check Stock