Top Brass Push In Fitting

Dixon Valve BPN23 Brass Push-On Hose Fitting, 3/8\ NPTF Male (Dryseal) x 1/4\ Hose ID Barbed

• Push-on fitting are intended for use with Lok-On (push-on style) hose only.
• Lok-On fitting will properly grip Lok-On hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
• 3/8-inches NPTF male and 1/4-inches hose ID barbed.

Dixon Valve BPN252 Brass Push-On Hose Fitting, 1/4\ NPTF Male (Dryseal) x 5/16\ Hose ID Barbed

• Push-on fitting are intended for use with Lok-On (push-on style) hose only.
• Lok-On fitting will properly grip Lok-On hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
• 1/4-inches NPTF male and 5/16-inches hose ID barbed.

Beduan Brass BPL Push to Connect Air Fittings Elbow 1/4\ Tube OD x 1/8\ NPT Male 90° Degree Adapter (Pack of 5)

• Type:Push in fitting/Push to connect /Size:1/4 " Tube OD x 1/8" NPT Thread.
• Fluid Admitted:Air Vacuum Water (no freezing).
• Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC.
• Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR/ Lock Claw:Nickle-Plated Brass /Body:Nickle-Plated Brass.
• Working Temperature:0-60°C | 32～140°F/Negative Pressure:-100Kpa | -29.5 In Hg.

SharkBite 3/4 Inch x 1/2 Inch Reducing Coupling, Pack of 12, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U058LF

• SHARKBITE BRASS PUSH REDUCING COUPLING: This push-to-connect fitting allows you to make a connection between two different-sized pipes in any combination.
• remove using a disconnect clip or disconnect tongs.
• VERSATILE: Pushfit reducing connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
• large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
• EASY TO INSTALL: The SharkBite brass reducing couplers allow for easy installation, with no tools, crimping, glue, or soldering required.
• can be installed in wet lines and approved for underground and behind-the-wall applications with no access panels.
• PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
• SPECS: Made with DZR forged brass, this brass reducing coupling can withstand 200 degrees F and 200 PSI.

SharkBite 3/4 Inch x 3/4 Inch x 1/2 Inch Reducing Tee, Pack of 6, Push To Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U412LF

• SHARKBITE BRASS PUSH REDUCING TEE: This push-to-connect fitting can be used when joining two different-sized pipes quickly and easily.
• remove using a disconnect clip or disconnect tongs.
• VERSATILE: Pushfit reducing tees work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
• large diameter fittings (1-1/4 inches to 2 inches) require a Stiffener when connecting to PEX pipe.
• EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass reducing tees allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
• PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
• suitable for underground and behind-the-wall applications with no access panels.
• SPECS: Made with DZR forged brass, this reducing tee can withstand 200 degrees F and 200 PSI.

Utah Pneumatic Push To Connect Air Line Fittings 1/4'Od Union Straight Tube Connector Air Fittings Quick Connect Push Lock Fittings Air Bag Fittings Pneumatic Tube Fittings Plated Brass Push (5 Pack)

• SPECIFICATION: Acceptable Fluid : Air And Water Pressure Range: Max Working Pressure: 2mpa | 290psi/ Working Temperature:-20°C—120°C | -4°F—248°F Applicable Tube: PU/NYLON/Soft PE Hose Push Connect Air Fittings Push Fitting.
• Installation : push to connect fittings can be done within a short period of time. This tube connector is available in various styles and models Each model to serve its purpose All models of push in connector are designed to suit your pneumatic piping needs perfectly.
• Thinking of changing the tube direction after installation ? .Be relaxed . You can easily change the tubing connector direction even after installation. The release ring conforms with the ellipse design to ensure that the disconnecting unit is in good shape.
• It's important to note the taper threads on each fitting are properly coated with Teflon for optimal performance of the entire plumbing system.All push to fit, contains internal hexagonal holes.
• this enhances the installation of the push connect fittings process in a narrow space.
• These Push In Fittings Meet The Pressures And Temperatures Mentioned. Our Connect Push Brass Is More Resistant To High Temperatures We Are Ready To Serve You And Answer Any Questions Related To Our Straight Air We Are Committed To....

SharkBite 1 Inch x 3/4 Inch MNPT Reducing Adapter, Pack of 6, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U142LF

• SHARKBITE BRASS PUSH MALE REDUCING ADAPTER: This push-to-connect fitting allows you to make a transition between a pipe and an FNPT thread quickly and easily.
• ideal for working in tight spaces **Remove using a disconnect clip or disconnect tongs**.
• VERSATILE: Pushfit male reducing connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
• large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
• EASY TO INSTALL: The innovative push-to-connect design of the SharkBite push male reducing adapters allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
• PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
• approved for underground and behind-the-wall applications with no access panels.
• SPECS: Made with DZR forged brass, this reducing adapter can withstand 200 degrees F and 200 PSI.

Parker Hannifin 27-2 Dubl-Barb Brass Body Male Connector Fitting, 1/4\ Barb Tube x 10-32 Male UNF Thread

iCrimp Push-to-Connect,Push-fit Disconnect Tool for Brass-Push Fittings Removing,Multi-size Combination 1/2 ,3/4 ,1 -CRQ01

• 「VERSATILE TOOL」With one tool allows 1/2”,3/4”,1” Push-to-Connect to be disconnected from the copper, CPVC, or PEX pipe, no extra....
• 「REMOVES IN SECONDS」Simply align the tool with pipe and fitting and squeeze to remove push-to-connect fittings effortless and quickly..
• 「DURABILITY」Constructed of high-quality carbon steel with corrosion resistance ensures reliable functionality and long service life..
• 「ERGONOMIC DESIGN」Wide handle with dipped grips reduce fatigue and one-handed operation design to allow your free hand the ability to assist in....
• 「VERSATILITY」It's compatible with regular Push-fit/Push-to-Connect brass fittings..

mistcooling 250 PSI Misting Pump

• Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
• 1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter the pump only when main power switch is turned on. Likewise, water flow will be cut off when power switch is turned off. No adjustment is ever required for solenoid valve..

10 Pcs. XFITTING 1/2' Push Fit Coupling, Lead Free

• XFITTING PUSH FIT easiest and fastest way to join copper, CPVC or PEX pipe in any combination.
• LEAD FREE brass body. Foundation of a strong, corrosion resistant, durable fitting..
• Approved to be used underground and behind walls without access panels.
• Max presure: 200psi/Max temperature: 200F.

SUNGATOR 3/4 Inch Check Valve No Lead Brass Push to Connect Plumbing Fittings to Connect PEX Copper CPVC PE-RT With A Disconnect Clip Pack of 6

• 【APPROVED TO USE】: Certified and listed to ASSE 1061, NSF/ANSI 61.
• Meet UPC, CUPC requirements. Lead Free brass is safe for drinking water and hydronic heating water distribution..
• 【EASY INSTALLATION】: Complete installs faster and safer than traditional methods with brass push-to-connect fittings and ease of use reduces installation errors as they completely eliminates the need to solder, crimp, glue, thread or fabricate in any forms.
• Just push and lock the pipe to get the seamless performance..
• 【VERSATILE APPLICATIONS】: Whether you are repairing a water line, installing a water heater, remodeling a home or plumbing a system in a new construction job, they are compatible with a range of different end connections, joining any combination of PEX, copper, CPVC pipe..
• 【LONG LASTING】: Made of high-quality brass that is an abrasion resistant material for use in prevention and protection of fittings against corrosion, scratches, dulling and other damage after use. It is a perfect material for pipe fitting system as it can withstand rated up to 200 °F and 200 PSI and long period of wear and tear..
• 【BUNDLE INCLUDES】: 3/4 Inch Check Valve (6 PCS).