Top Brass Rail

TPO 1 inch Anti-Cant Scope Bubble Level for Precision Long-Range Shooting (1 INCH)

  • Comes with three cards, 10 piece card pack available at time of purchase or sold separately!.
  • The X Ring Rail-mounted Data System, or RDS, was designed to conveniently locate your ballistic data in a position that can viewed without moving out of your shooting position. Mounts directly to Picatinny rail.
  • Low profile - will fit under low optics. Ballistic data can be recorded on the provided blank DOPE cards, or written directly on the vinyl protective sleeve with either a wet erase pen, map pen, or grease pencil..
  • It is simple to position and doesn't move under recoil. It also folds out of the way for ease of storage when not in use. The lightweight reinforced crystalline polymer bodies, along with stainless steel and brass fasteners, make it durable and able to withstand chemicals and weather conditions. Stainless steel and brass fasteners.
  • Designed, manufactured, and assembled in USA.
Check Stock

Demeras Billiards Table Pocket Rail, Adjustabl Snooker Table Brass Rail Exquisite 6PCS for Outdoor

  • The billiard table rail is connected to the billiard table, which can accommodate more billiard balls and make it easier to pick up and arrange the ball..
  • The billiard table rail is equipped with a 5‑hole belt, each has a screw hole for easy track fixing, and the other side is a belt with 5 holes for adjustable height and length..
  • Billiard table rail is made of high quality bronze brass, strong and durable, long service life, rest assured to use..
  • Heavy load, it can bear the weight of billiard balls and billiard balls when rolling..
  • Nice replacement for your billiards table to get new rails..
Check Stock

Kadimendium Snooker Table Brass Rail, Bronze Brass Billiards Table Pocket Rail 5 Hole Belt Heavy Duty for Outdoor Sports

  • The billiard table rail is connected to the billiard table, which can accommodate more billiard balls and make it easier to pick up and arrange the ball..
  • The billiard table rail is equipped with a 5‑hole belt, each has a screw hole for easy track fixing, and the other side is a belt with 5 holes for adjustable height and length..
  • Billiard table rail is made of high quality bronze brass, strong and durable, long service life, rest assured to use..
  • Heavy load, it can bear the weight of billiard balls and billiard balls when rolling..
  • Nice replacement for your billiards table to get new rails..
Check Stock

Homaisson Mortise Gauge, Woodworking Scriber Marking Tool 6.4in Ebony Mortise Square Gauge, Brass Screw Type Sliding Mark Scraper, Adjustable Head Meter Carpentry Marker

  • ...g Mortise Gauge: Our woodworking mortise gauge is designed with 1 nail on one side and 2 nails on the other side for drawing either single or double lines, suitable for marking, scribing, laying out on all kinds of joinery or other woodwork..
  • 2. Hard Ebony & Wear-proof Brass Materials: The main body of the marking scriber is made of ebony with high hardness, and the guide rail, backing, and screw are all inlaid with pure copper bars, making the scriber durable against wear, rust, and corrosion..
  • 3. Wide Adjustment Range of Nail Space: The distance between 2 nails can be adjusted by turning the screw knob on the top, which is easy to operate, and the adjustment range of 0.2”-4” is wide enough to meet your needs for different wood marking requirements..
  • 4. Smooth Brass Slider: The brass adjustment sliding bar slides smoothly, with a small handle on the end that adopts ergonomic design for easy pulling of the slider. It is firmly fixed on the guide rail by tightening the screw, so displacement will not happen when in use..
  • 5. Professional Woodworking Tool: The woodworking scri....
Check Stock

Shades 4 Pack Molding Hook Kit Holds 45lb Each with Picture Rail Hooks, Superior Design CAM Hooks and Loop Cords or Cables (39\ perlon, White)

  • Picture rail kit: Super strong picture rail molding hook with steel cable or transparent perlon loop cord and efficiently engineered push-button CAM picture hanging hook.
  • 45lb weight capacity for both perlon cord and steel cable kit, add another kit to double the capacity.
  • Protect your walls by using these on your traditional rounded picture rail moulding.
  • Hang you artwork in less than a minute, rearrange even faster!.
  • Choose from white, silver, brass or bronze finish, and clear cord or steel cable in desired length.
Check Stock

Demeras Snooker Table Brass Rail Billiards Table Pocket Rail Nice Replacement Billiard Table Rail Billiard Table Brass Rail for Your Billiards Table

  • Heavy load, it can bear the weight of billiard balls and billiard balls when rolling..
  • Nice replacement for your billiards table to get new rails..
  • Billiard table rail is made of high quality bronze brass, strong and durable, long service life, rest assured to use..
  • The billiard table rail is equipped with a 5 hole belt, each ring has a screw hole for easy track fixing, and the other side is a belt with 5 holes for adjustable height and length..
  • The billiard table rail is connected to the billiard table, which can accommodate more billiard balls and make it easier to pick up and arrange the ball..
Check Stock

CZH-LABS DIN Rail Mount 8 Amp Solid State Relay SSR Module in 4~32VDC Out 100~240VAC 8 Channels

  • MOC3043 Phototriac and BTA12-600B triac (the heatsink is electrically insulated)..
  • Input Action Voltage DC 3 to 32V. LED indication for each channel. Anti-reverse protection diode..
  • Output Load Voltage range AC 100 to 240V (50/60Hz). Maximum on-state average current: 8 Amp, maximum on-state current 12 Amp (< 10 seconds). Isolation: Phototriac. Zero cross: Yes..
  • Terminal Block: Wire range: 24 ~ 12 AWG / 2.5mm square. Strip length: 7mm. Screws - M2.5, steel, Cr3+ Zn plated. Pin header and Cage - Brass..
  • DIN rail mount, Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail. FR-4 fiber glass PCB, dual copper layers..
Check Stock

CZH-LABS RPi Screw Terminal Block Breakout Module with Aluminum Enclosure for Raspberry Pi 1 2 3 Model B/B+

  • RPi Screw Terminal Block Breakout Module with Aluminum Enclosure. With the adapter module you can easily extend Raspberry-Pi projects to industrial....
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. Standard IDC40 pitch....
  • Support for Desktop, Panel mount, Wall-mount or DIN rail mount. DIN rail mount supports vertical or horizontal place mounting. Can support width 35mm....
  • Enclosure: High quality aluminum enclosure, thickness 1.5mm/0.06", with attractive and extremely durable powder coat painting and clear laser marking....
  • Packing list: 1x Terminal Block Board, 1x Aluminum enclosure(top and bottom covers), 2x DIN rail adapter Bracket, 4x Brass standoff, 5x M3x4mm Flat....
Check Stock

Hubbell TD1000 Digital Display Module

  • Support AC and DC control signal, Relay action LED indicator, relay coil protection by means of a freewheeling diode..
  • Panasonic PA1a SPST-NO 5Amp power relay. Original Panasonic PA1a-PS pluggable socket for support replacement relay, and with removal key..
  • Dinkle high quality fireproof nylon material DIN rail mount housing, can support width 35mm, 32mm and 15mm rail..
  • High quality screw terminal blocks and clear marking label for terminal block position. Pitch 5.08mm/0.2" and 7.62mm/0.3" screw terminal block. Wire range 26 to 12AWG / 2.5mm square. Screws - M2.5, steel, Cr3+ Zn plated. Pin header and Cage - Brass..
  • High quality glass fiber FR-4 PCB, top and bottom dual copper layers..
Check Stock

Antrader No-Mortise Bed Rail Bracket Heavy Duty Fittings Complete 8 Sets Screws Included Enough for 2 Beds

  • Hook Plate Size: 90 x 15 x 21mm/ 3.54" x 0.59" x 0.83"(L*W*T).
  • Mounting Plate Size: 85 x 37 x 2.3mm/ 3.35" x 1.46" x 0.09"(L*W).
  • Package Content: 8 x Bed Rail Bracket, 8 x Plate (Enough for 2 Beds).
Check Stock

The Original Brass Goat Brass Catcher | Tactical Rifle AR 15 Accessories | Deluxe Gun Shell Catcher for Quick Unload | Solid Plastic Mesh Net Bag | Black

  • ORIGINAL BRASS GOAT BRASS CATCHER: The best accessory for rifles, expertly designed by marksmen and compatible with mil-spec lower receivers to fit most cartridge sizes. This Brass Goat shell catcher is made of ABS resin for 30 shell casings, and will never jam when used properly. The Original Brass Goat BG-15 is proudly made in the USA for novice and expert marksman..
  • 2-PIECE DEFLECTOR AND HOPPER: Now packaged as a combo set, this brass deflector and hopper can be used apart or together as one unit to catch and deflect brass. Add Brass Goat in the color black to your tactical rifle accessories, with a quick hand it takes just a second to attach on the right side of your magazine for reloading equipment, or easy cleanup at a firing range..
  • SHELL CATCHER FOR QUICK UNLOAD: This Brass Goat solid shell bag adaptor fits well on right handed ejection upper receiver guns, plus on ones with extended mag release, magpul and picatinny rail tools. Plus, there is also a quick release button for ammo to unload your shells rapidly for your firearm upgrade..
  • HIGHLY COMPATIBLE FOR CARTRIDGES: This solid plastic resin Brass Goat BG 15 for AR magwell mounts is made for firearms with military spec AR lower receivers, with the exception of the AR model 10, 308, 6.5 C, and ....
Check Stock

Allied Brass MT-1-22-GAL-IRW Montero Collection 22 Inch Solid IPE Ironwood Gallery Rail Wood Shelf, Antique Brass

  • Crafted of the finest solid brass and ipe ironwood materials.
  • Concealed screw mounting hardware installs easily.
  • Wall mounted design is an ideal use of space.
  • Products are provided with a limited lifetime.
  • Solid brass gallery rail will keep your items secure.
  • Contemporary design with traditional design elements.
Check Stock