Top Brass Sanitary Pipe Fittings

SharkBite 3/4 Inch Polybutylene Transition Coupling, Pack of 6, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U4016LF

SHARKBITE BRASS PUSH POLYBUTYLENE TRANSITION COUPLING: Polybutylene transition couplings are used to perfectly transition from a polybutylene pipe to another pipe.
remove using a disconnect clip or disconnect tongs.
COMPATIBILITY: Color-coordinated collars on the ends of the fittings identify which side goes with which pipe.
gray collar end works with polybutylene pipe.
tan collar end is compatible with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
EASY TO INSTALL: The SharkBite brass transition coupling features a push-to-connect mechanism for a watertight union, and allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for underground and behind-the-wall applications with no access panels.
SPECS: Made with DZR forged brass, this transition coupling can withstand 200 degrees F and 200 PSI.

Check Stock

Legines Brass Pipe Fitting Long Nipple, 1/8' NPT Male x 1/8' NPT Male Extender Straight Connector, 1-1/2'Length 1200psi (Pack of 5)

Long nipple for connecting two threaded pipes and extending pipe length.
1/8" Male National Pipe Taper (NPT) threads for connecting to 1/8" female threaded pipes.
Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Check Stock

1.5\ Tri Clamp Ferrules, SS304 Long Weld Clamp Ferrule for Sanitary Fittings 2PCS

Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
Fit for all other homebrew stuff sanitary fittings..

Check Stock

3/4 Inch Tee Fitting Compression Tee Fittings for 3/4 Inch Tubing System (2 pcs)

【Lead Free Material】PPSU is a durable plastic poly material, lead free and non-toxic. So PPSU is more eco-friendly than brass. These pex expansion fittings meet the standard of potable water grade. When the water flows through the poly pex fittings, it will not be polluted..
【Fully Equipped】Qty: 1/2 inch pex expansion elbows 10pcs + 1/2 inch pex expansion Tees 10pcs + 1/2 inch pex expansion couplings 10pcs + 1/2 inch pex expansion rings 70pcs | Connection pipe type: Pex A pipe only | Max temperature: 200F | Max operating pressure: 160psi.
【Professional Standards】Pex Expansion A Fittings are of high quality. All poly pex a fittings are manufactured according to ASTM F-1960, CSA B137.5 and qualified cUPC certification. Listed to NSF NSF/ANSI 61..
【Easy to Install】Use expansion tools and expansion rings to connect the expansion fittings to the PEX A pipe. The protruding stop part on the expansion pex fitting makes it clear whether it has been installed in place. NOTE: Expansion tool is not included in the package..
【Wide Usage】Plastic poly pex expansion fittings can be widely used in heating circulation system and domestic water. Due to its good corrosion resistance and heat resistance, it can have excellent performance even in a chemica....

Check Stock

Joywayus Brass Hose Fitting,90 Degree Elbow,3/8\ Barb x 3/8\ NPT Male Pipe Water/Fuel/Air (Pack of 2)

【Solid Brass】The hose barb fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use..
【Package Include】3PCS 5/8"x5/8"x5/8" Brass 90°Included Angle Y Hose Barb Fittings..
【Heavy & Thick】Heavy Y shaped brass barbs and thickened wall, higher strength and very rugged..
【Solid Connection】The Y shaped hose barb fittings can be solid connected to the hose (Fit hose which ID of 16mm)..
【Note】Keep the water pipe incision flat. It is better to use with clamps (Not include). Tighten clamps as tightly as possible to prevent leakage..

Check Stock

DOT Brass Air Line Quick Connect Fittings Assortment, 34 Pcs DOT Push to Connect Air fittings 1/4" 3/8" 1/2" Air Fitting Kit with 1/4" Schrader Valve Air Line Fittings for Trucks or Industrial

【PREMIUM MATERIAL】：Our dot push to connect air fittings are made of high quality CA360 brass, meet D.O.T. FMVSS 571.106, SAE J1131 with corrosion resistance, high temperature ductility and low permeability. Long service time, air brake fitting assortment type: 1/4", 3/8", 1/2"..
【TYPICAL APPLICATION】：The dot air line quick connect fittings can be used with air suspension systems, copper tubing in air lines brake systems, perfect for truck /RV repair air line leak, also perfect for industrial workshops, daily garden or lawn mower repair, towing machine hose connection and so on..
【EASY TO INSTALL】：Pre applied red sealant for male thread for better sealing. All brass quick connect air fittings can be sealed by pushing the tube firmly into the fittings, simply depress button to remove tubing..
【MAX PRESSURE】：Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer's recommendations for pressure and temperature mutations).
【ALL IN ONE SET】: Unique DOT Air Brake fit....

Check Stock

Tecmolog Brass Pipe Fittings Connector G 1/2 Female Thread (Metric BSP) to US 1/2 NPT Male Thread Pipe Fitting Converter Adapter, SBA037

BSP to NPT Adapter: Metric BSP 1/2" (G) female to NPT 1/2" male pipe fitting converter, easily change from standard EU metric to US inches.
Brass Pipe Fittings 1/2: This adapter is made of brass for resistance to corrosion, ductility at high temperatures, and low magnetic permeability.
Rubber Washers and Teflon Tape for a Perfect Seal: Come with an o-ring for the G1/2 side and the 1/2 " NPT side to produce a leak free connection.
Connect Hoses or Fittings of US plumbing: This is used to adapt the plumbing to NPT on bath or kitchen fixture, and European hose fittings.
Easy to Install: It has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench.

Check Stock

SUNGATOR 3 Pack Barbed Brass Hose Fittings 1/2 Barb to 1/2 NPT Male Threaded End Fittings Hose Connector Adapter with Sealing Tape and Hose Clamps

【SIZE AND PACKAGING】: 1/2"barb X 1/2"NPT male pipe, package includes 3 hose barb fittings, 1 sealing tape, 3 hose clamps.
【DURABLE】: Made of High quality solid brass, not a cast product and has a thick wall, this hose barb fitting is firm and durable, and provides high resistance to abrasion and corrosion, longer service life than iron and iron galvanized pipe fittings.
【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective and tight connection, not easy to slip.
【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).
【FUNCTION】: Barb head for connecting hoses, NPT male end used to connect NPT pipes, the hose barb fittings can apply to gas, oil and fuel as well as air tools.

Check Stock

SUNGATOR Brass Barbed Hose Fittings 1 Barb to 1 NPT Male Threaded End Hose Barb Pipe Fittings Hose Adapter Connector with Sealing Tape and Hose Clamps 2 Pack

【SIZE AND PACKAGING】: 1"barb X 1"NPT male pipe, package includes 2 hose barb fittings, 1 sealing tape, 2 hose clamps.
【DURABLE】: Made of High quality solid brass, not a cast product and has a thick wall, this hose barb fitting is firm and durable, and provides high resistance to abrasion and corrosion, longer service life than iron and iron galvanized pipe fittings.
【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective and tight connection, not easy to slip.
【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).
【FUNCTION】: Barb head for connecting hoses, NPT male end used to connect NPT pipes, the hose barb fittings can apply to gas, oil and fuel.

Check Stock

flowmavin 1.5 inches Tri Clamp Tee 3 Way Sanitary Fitting Stainless Steel 304 Mirror Polished, 38mm Pipe OD.

Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
Fit for all other homebrew stuff sanitary fittings..

Check Stock

GASHER 15PCS Brass Pipe Fitting Hex Bushing Reducer Adapter Reducing Hex Nipple 3/8 Inch NPT x 1/4 Inch NPT

Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..

Check Stock

Hooshing Brass Pipe Fitting, 1/2' Female to 1/2' Male Pipe Nipple Extension Connector Fitting, Hex Bushing Adapter, Reducer Adapter, Solid Brass Length 1.97 Inch/50mm

【Material】High quality soild brass for corrosion resistance, high temperature ductility and low magnetic permeability. Strong and durable..
【Size】1/2 Inch Female x 1/2 Inch Male Thread, the thread is NPS, have no tapered. It's straight thread..
【Extension Design】Length: 1.97 Inch/50 mm, can be used to extend the length of the pipe or fitting.Deeper and smoother threads makes work easier and more efficient..
【Widely Applications】Use to extend shower fixtures/arms through walls, extend tub spouts.Also be used with grease, fuels and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
【Note】Brass pipe fittings for connecting pipes or fittings of different thread types, can be used in wet environments.Not recommended for potable water..

Check Stock