Top Brass Set Up Gauge Blocks

AURELIO TECH UPGRATED Version 4 Way A/C Manifold Gauge Set Fits R134A R410A R404A R22 Refrigerants with 5FT Hose, 3 Acme Tank Adapters, Adjustable Couplers and Can Tap

  • 2020 UPGRATE VERSION: 1) Can tap with back-flow preventer. 2) 100% brass and aluminum valve gauge body, knobs are made of brass instead of plastic..
  • Tester Freon gas Service Diagnostic AC Gauges.
  • R134A R410A R404A R22 Manifold Gauge Set A/C..
  • Fahrenheit degree unit with easy to read instrument panel..
  • red for high pressure, blue for low pressure, yellow for refrigerant bottle with ACEM 1/4".
  • 1x adjustable can tap (piercing-style)(1/4" male).
Check Stock

DASBET Car Vacuum and Fuel Pump Tester Gauge Kit, Fuel Pump and Vacuum Tester Gauge, Leak Carburetor Pressure Diagnostics

  • ... Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
  • Package Included: (1) vacuum pressure gauge, (1) 2-foot (61cm) long rubber hose – 13/64-inch ID 23/64-inch OD, (1) brass cone adapter, (1) plastic connector, (1) 1/4”x18 male to 1/8”-27 female brass adapter, (1) 1/8”-27 male to 7/32” barbed brass fitting adapter, (1) 1/8”-27 female to 3/8” male brass adapter, (1) T-type 7/32” barded brass fitting adapter, (1) carrying case.
Check Stock

ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum Carburetor Intake Manifold & Vacuum Test

  • ...GE: Heavy-duty 12.75” x 2.25” x 7.25” inch (32.4cm x 5.7cm x 18.4cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization.
  • PACKAGE CONTENTS: Package includes (1) vacuum pressure gauge, (1) 2-foot (61cm) long rubber hose – 13/64-inch ID 23/64-inch OD, (1) brass cone adapter, (1) plastic connector, (1) 1/4”x18 male to 1/8”-27 female brass adapter, (1) 1/8”-27 male to 7/32” barbed brass fitting adapter, (1) 1/8”-27 female to 3/8” male brass adapter, (1) T-type 7/32” barded brass fitting adapter, (1) carrying case, and (1) instruction manual for your convenience.
Check Stock

Hromee 1/4 Inch Air Compressor Filter Regulator Combo Water Oil Separator with Pressure Gauge Manual Drain Ball Valve and Bracket AW2000-02

  • BRASS FILTER ELEMENT - Filtering moisture and fine particles to get clean and dry air which prevents damage to air tools, spray guns and pneumatic....
  • PRESSURE REGULATOR - With the adjustable pressure control knob, you can pull up and turn the black knob at the top of the regulator to set desired....
  • GAUGE&FILTER CUP - The pressure gauge is more accurate to the pressure induction and the metal shell is resistant corrosion. The dial scale has two....
  • EXTRA ACCESSORIES - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It....
  • PIGGYBACK- Air pressure regulator combines the functions of both air filter and regulator. It is compact and much effective when space is constrained.....
Check Stock

LEIMO KPARTS AC Diagnostic Manifold Gauge Set for Freon Charging, Fits R410A R22 R404 Refrigerants, 1/4' Thread Hose Set 60' with 2 Quick Coupler-r410a Manifold Gauge Set

  • AC A/C Manifold Gauge Set —- 3-way air conditioning diagnostic manifold gauge set for R404a, R410a, R22 refrigerants. Designed for AC charging, diagnostic check and recovery work.
  • Necessary tools for HVAC, car air condition maintenance and coolant or Freon adding.Widely used for household air conditioning units.
  •  Refrigerator, air conditioner and industrial refrigeration equipment..
  • Easy to operate and install, strong sealing for durability and safety.The solid brass gauge threaded connector and hose fitting is different from the brass plated construction, corrosion-resistant and rustless——ideal for professional auto mechanics. .
  • Freon Charging Hose 4000PSI Burst 800PSI Max W.P. each hose is approx. 5ft ( 60 inches / 152 cm) with 1/4″ SAE fitting——HIGH PRESSURE HOSES with ¼” SAE standard fittings using the highest technology rubber materials giving the hoses the most flexibility and reducing the risk of kinking.
  • Include 3-PC 5FT extra long Freon charging hose, 3 color for easily recognition, red for high pressure, blue for low pressure, yellow for refrigerant bottle –r410a manifold gauge set.
Check Stock

220V Self Priming Water Pump Pressure Switch Automatic Pressure Controller Black

  • What you will get: you will receive 1 piece of 2 inch, 1/4 inch NPT water pump pressure gauge, 1 piece of 1/4 inch NPT female thread 1/2 inch male threaded brass fitting and 1 piece of tape, a total of 3 accessories for swimming pool pressure gauges, they are indispensable accessories for swimming pools and other equipment.
  • Clear and accurate reading: this water pump pressure gauge has a clear surface and accurate reading, it can provide accurate readings in the range of 1 to 100 psi and 0 to 7 bar for pumps, it is equipped with a 2 inch dial, is a practical tool for detecting water pressure.
  • Reliable material: this pump pressure gauge and 1/4 inch NPT internal thread x 1/2 inch external thread joint are made of brass, not easy to wear, comfortable texture, durable, the surface of this gauge is made of plastic which allows you to see clearly to the reading and pressure range, and use the tape when installing the pressure gauge to prevent leakage.
  • Brass fitting size: NPT thread size is the correct size and does not represent the actual diameter, 1/4 inch NPT internal thread x 1/2 inch external thread brass fitting can be applied to connect the pressure gauge, it is ideal to use the tape to make installation more stable.
Check Stock

VOLT 300W LED Low Voltage Transformer (12V/15V)

  • ...ghting system. No need to worry about voltage loss..
  • MODULAR TIMER WITH PHOTOCELL INCLUDED - Visible through the housing window, this timer can be set for simple dusk-to-dawn operation or set to turn off after a certain number of hours. The photocell is built into the timer..
  • EASY TO INSTALL - The clamp-type terminal blocks are impressively easy to use - taking seconds to connect - compared to many minutes of frustrating work for standard terminal blocks. Just insert the stripped wire and close the clamp! Accepts up to 10-gauge wire..
  • HIGH PERFORMANCE – This transformer's toroidal core allows for more reliable, efficient, cooler and quieter operation than comparable EI laminated types. It's also superior to electronic transformers, which may not be compatible with LED circuits, suffer from extensive voltage loss, and are subject to overheating and premature failure..
  • LIFETIME WARRANTY – With an industry-leading warranty, this Slim Line Transformer is designed for a lifetime of worry-free use - we guarantee it. The core, stainless steel enclosure and all electrical components are backed by our lifetime warranty..
Check Stock

BTSHUB Fuel Pump & Vacuum Tester Gauge Leak Carburetor Pressure Diagnostics Tool Kit

  • Extra-long rubber hose and 14mm/18mm manifold adapter.
  • Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
  • Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
  • Package Includes: 1x Gauge,1x 24-inch long rubber hose 40 PSI,1x brass cone adapter,2x plastic connector,1x 1/4" x18 male to 1/8" -27 female brass adapter,1x 1/8”-27 male to 7/32" barbed brass fitting adapter,1x 1/8"-27 female to 3/8" male brass adapter,1x T-type 7/32" barded fitting adapter.
Check Stock

StewMac Angle Gauge

  • A simple and fast way to consistently set the gap between strings and pickups.
  • Fret a string at the last fret, slide a gauge under it, and raise the pickup until the polepiece touches the gauge.
  • Made of non-magnetic brass, so it won't stick to the polepieces, making it more practical than steel rulers or feeler gauges.
  • Set of 4 gauges in the following thicknesses: 1/32", 1/16", 3/32" and 1/8".
Check Stock

Kegco EBSHCK-5T Kegerator Kit, 1 Faucet with Tank, Standard

  • ...OR: Easily measure PSI and Co2 volume and adjust Co2 output pressure using this Kegco 542 Pro Series Double Gauge Regulator packed with premium features! The top gauge indicates output pressure, while the side gauge tells you what's left in the Co2 tank, so you don't run out of gas during a party. The chrome plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve..
  • BALL LOCK KEG COUPLERS: This complete ball lock home brew keg tap set includes both a gas in and beer out coupler for easy tapping of ball lock Cornelius Pepsi kegs. The gas in comes with a 1/4" nut and 5/16" hose barb already attached, allowing you to quickly connect it to the same size air line that standard draft beer regulators use. The beer out connector has a 3/16" hose barb that connects to standard 3/16" beer line..
  • CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this NSF-approved beer faucet puts a stylish finishing touch on your kegerator at a price you'll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles..
  • STANDARD METAL BEER FAUCET WRENCH: Th....
Check Stock

Novelty Lights 35 Light Clear Christmas Craft Mini Light Set, White Wire, 17' Long

  • The set is not connectable end to end, but does have a "piggy back" stackable famale on each male plug. Each set is UL listed for indoor and outdoor use. Great value and quality for a specialty short string of lights perfect for wine bottles, glass blocks, small wreaths, and short garland..
  • Our mini light light set is reminiscent of an old fashioned light set that you may have had on the Christmas tree growing up or still use today on your one of a kind tree. What we like to call old school with new age technology that still looks classic..
  • What is so great about these mini light strings is if one bulb goes out the rest stay lit because of the shunt that is manufactured inside each bulb that makes the power transfer to the next bulb regardless if its burnt out. This process is called "series parallel"..
  • Lighting Application Examples include: Use on bottles, glass blocks, wreaths, tree's, bushes, hedges, fences, pillars, weddings, holiday's, prom, dance functions, restaurants, bars, patio's, or wherever decoration lighting is wa....
Check Stock

ATPEAM Vacuum and Fuel Pump Tester Gauge Kit, Fuel Pump Pressure & Vacuum, Carburetor Intake Manifold, & Vacuum Test

  • ...ng pressures up to 10 PSI (0.7 Bar), Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSI (0-0.7 kg/cm²) pressure.
  • Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
  • Package Includes: 1x Gauge,1x 24-inch long rubber hose 40 PSI,1x brass cone adapter,2x plastic connector,1x 1/4" x18 male to 1/8" -27 female brass adapter,1x 1/8”-27 male to 7/32" barbed brass fitting adapter,1x 1/8"-27 female to 3/8" male brass adapter,1x T-type 7/32" barded fitting adapter.
Check Stock