Top Brass Shim Stock

Valve Spring Shim - 1.500\ OD.645\ ID .060\ Thickness

  • Must-Have for Your Next Engine Build or Spring Upgrade - Production tolerances in cylinder heads, valve lengths, valve springs, retainers and locks can impact the valve spring installed height from valve to valve, greatly impacting spring seat and open pressures. COMP Cams spring shims are a must-have to ensure precise installed height on intake and exhaust valves..
  • Guaranteed Precision - COMP Cams shims are crafted from the finest shim stock steel to precise dimensions, ensuring consistent installed height adjustments from the first valve to the last..
  • Race Tough - COMP Cams valve spring shims are not only made from the highest quality shim stock available, they are also heat treated to withstand the most radical camshaft profiles..
  • 1.500" Outside Diameter, 0.645" Inside Diameter. Includes 1 0.060" Thick Shim..
  • Recommended for use with our 916, 26056, 917, 928, 929, 924, 925, 911, 954, 936, 938, 930, 953, 999, 26094, 943, 26055, 939, 927, 919, 933, 935, 944, 26095, 26097, 932, 26089,955, 26115, 26099 and 26547 springs..
  • Available in an assortment pack under part number 4757..
Check Stock

Precision Brand 17SX3 Brass Shim Stock, 6″ x 60″ Roll, 260 Alloy Brass, 0.003″

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Especially useful for pilot production runs where material accuracy and economy are important.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
Check Stock

1-1/2 C360 BRASS ROUND ROD 6\ long +.07\/-0 Solid 1.50\ Diameter H02 Lathe Bar Stock

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Especially useful for pilot production runs where material accuracy and economy are important.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
Check Stock

Precision Brand 17SN6 Brass Shim Stock, 6″ x 18″ Flat Sheets, 260 Alloy Brass, 0.006″ (Pack of 10)

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • It is especially useful for pilot production runs where material accuracy and economy are important.
Check Stock

Precision Brand 17SN9 Brass Shim Stock, 6″ x 18″ Flat Sheets, 260 Alloy Brass, 0.009″ (Pack of 10)

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • It is especially useful for pilot production runs where material accuracy and economy are important.
Check Stock

Valve Spring Shim Kit - 1.300\ OD.520\ ID .030\ Thickness

  • Must-Have for Your Next Engine Build or Spring Upgrade - Production tolerances in cylinder heads, valve lengths, valve springs, retainers and locks can impact the valve spring installed height from valve to valve, greatly impacting spring seat and open pressures. COMP Cams spring shims are a must-have to ensure precise installed height on intake and exhaust valves..
  • Precision - COMP Cams shims are crafted from the finest shim stock steel to precise dimensions, ensuring consistent installed height adjustments from the first valve to the last..
  • Race Tough - COMP Cams valve spring shims are not only made from the highest quality shim stock available, they are also heat treated to withstand the most radical camshaft profiles..
  • 1. 300" Outside Diameter, 0. 520" Inside Diameter. Includes 16 0. 030" Thick Shims..
  • Recommended for use with ~ 1. 300" Outside Diameter or smaller like our 26915 Beehive and 7228 Conical Spring..
Check Stock

260 Brass Shim Stock, Unpolished (Mill) Finish, H02 Temper, ASTM B19/ASTM B36, 0.40mm Thickness, 150mm Width, 2.5 m Length

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • It is especially useful for pilot production runs where material accuracy and economy are important.
Check Stock

260 Brass Shim Stock, Unpolished (Mill) Finish, H02 Temper, ASTM B19/ASTM B36, 0.80mm Thickness, 150mm Width, 2.5 m Length

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • It is especially useful for pilot production runs where material accuracy and economy are important.
Check Stock

Small Parts-17974 260 Brass Shim Stock, Unpolished (Mill) Finish, H02 Temper, ASTM B19/ASTM B36, 0.20mm Thickness, 150mm Width, 2.5 m Length

  • Brass Shim is made from a half hard, cold rolled, 260 alloy brass.
  • Has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability.
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
  • It is especially useful for pilot production runs where material accuracy and economy are important.
Check Stock

Cyleto Front Fork Oil Seal Kit 36mm x 48mm x 8mm for Kawasaki KZ750 KZ 750 1980-1982 KZ700 1984

  • Average horsepower increases of 15%-25%!.
  • Each DynoJet kit is precisely engineered to provide a simple and cost effective solution for all your riding needs.
  • Kit includes jets, needle, spring, shim and instructions.
  • Stage 1: stock engine/filters, stock/modified pipes.
  • Stage 3: stock/mild modified engine, stock/modified pipes, individual air filters.
  • drivability may be compromised, N/A for some motors.
Check Stock

Du-Bro 370 2mm Tap And Drill Set

  • These high quality ball links feature burnished brass swivel balls for smooth operation.
  • Complete with socket head cap screw, brass shim and hex nut.
Check Stock

Du-Bro 372 3 mm Tap And Drill Set

  • These high quality ball links feature burnished brass swivel balls for smooth operation.
  • Complete with socket head cap screw, brass shim and hex nut.
Check Stock