Top Brass Tube Fitting

RAINPAL SSBF010 Stainless Steel Bulkhead Fitting (Female 3/4\ NPS, Left Handed Nut) (2)

  • Size and Number of Pieces: 1/4" 10pcs 3/8" 10pcs 1/2" 10pcs Tube OD.
  • Working Pressure Range: Maximum up to 150PSl. Working Temperature Range: '-40℉ to +200℉(-40℃ to +93℃).
  • Applications: Used with SAE J844 Type A and Type B nylon tubing in air brake system, or in cab air controls, except for where temperature is under -40℉(-40℃) or above +200℉(+93℃)or where battery acid can drip on tubing..
  • Advantages: Meet D.O.T.FMVSS 571.106 air brake specifications. Meet functional requirements of the SAE 246 & SAE J1131. Machined from CA360 brass. Easy to assemble (no tube preparation or flaring required.) Built in tube support. Can be used with copper tubing by NTA body with long nut and spherical sleeve. Insert should be removed.
  • Assembly Instructions: 1. Cut tubing as flat as you can. Maximum 15°angle is allowed. 2.Check the port of the mating part free of burrs or debris. 3.Slide sleeve and then nut on the tubing. 4. Insert the preassembled fitting into the tubing and the tubing should be bottomed to the seat of the fitting. 5. Tighten the nut by wrench until one thread remains visible of the fitting body..
Check Stock

Beduan Brass Compression Fitting, Insert Tube Support Compression Sleeve Fitting 1/4\ Tube ID (Pack of 10)

  • ...ade of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
  • ✅[FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube or hard plastic tubing.....
Check Stock

Joywayus Compression Sleeve Ferrules 4mm Tube OD 2.9mm Tube ID Brass Compression Fitting and Insert Tube Ferrule Kit(Pack of 60)

  • Package include:30pcs sleeve ferrules+30pcs inserts..
  • Durable and high standard brass compression fitting..
  • Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability..
  • Commonly used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way..
Check Stock

Hilitchi 8Sizes Tube OD 4mm-16mm Brass Compression Sleeves Ferrules Compression Fitting Kit Metric 220Pcs

  • ...de of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
  • ✅ [FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅ [HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅ [APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube or hard plastic tubin....
Check Stock

Hilitchi 3Sizes Tube OD 1/4 5/16 3/8 Brass Compression Sleeves Ferrules Compression Fitting Kit (SAE, 105Pcs)

  • ...ade of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
  • ✅[FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube or hard plastic tubing.....
Check Stock

Frienda 12 Pieces 3/8 Inch-24 Threads Brake Line Fittings Assortment for 3/16 Inch Tube (4 Unions, 8 Nuts)

  • Fit for: the unions measures approx. 0.6 x 0.9 inch, the nut measures approx. 0.67 x 3/8 inch, fit for most common inverted flare or double flare sizes for 3/16 inch tube, for use with 3/16 inch steel, poly coated or copper brake lines.
  • Please confirm the size of the details according to the picture before purchasing.
  • Size and material: both the unions and nuts are metric 3/8-24 threads (regular 3/16 inch tube fitting size), all brake line fittings are made of quality brass to prevent rust and plated for corrosion resistance.
  • You will get: 12 pieces brake line fittings in the package, include 4 pieces unions and 8 pieces nuts, you can share them with your family and friends, these tubes unions are good fittings.
  • Inverted flare union: these unions are a nice option to join 2 (3/16 inch) brake lines together.
  • Brake line fitting connect: the nut is called the fitting for 3/16 inch tube, these unions fittings have a hex size of 3/8 inch and the threads are 3/8 inch with a thread pitch of 24.
Check Stock

Beduan Brass BPL Push to Connect Air Fittings Elbow 1/4\ Tube OD x 1/8\ NPT Male 90° Degree Adapter (Pack of 5)

  • Type:Push in fitting/Push to connect /Size:1/4 " Tube OD x 1/8" NPT Thread.
  • Fluid Admitted:Air Vacuum Water (no freezing).
  • Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC.
  • Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR/ Lock Claw:Nickle-Plated Brass /Body:Nickle-Plated Brass.
  • Working Temperature:0-60°C | 32～140°F/Negative Pressure:-100Kpa | -29.5 In Hg.
Check Stock

Wangdd22 E3D V6 Hot End Full Kit 1.75mm 12V Bowden/RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

  • Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall.
  • Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking.
  • Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality....
  • Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm.
  • Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 Pcs brass....
Check Stock

Sharkbite Disconnect Tongs all three U711, U713 & U715

  • Sharkbite Disconnect Tongs all three U711, U713 & U715.
  • Allows for easy removal of Universal brass push-to-connect fitting from pipe.
  • Used to remove a tube from a SharkBite push-fit fitting.
  • Easy to use and very fast to Disconnect with this tool.
Check Stock

Wasser Vela Outdoor Cool Misting System, 30 Feet Starter Kit, Metal Nozzle, for Patio, Backyard, Gazebos, Swimming Pool

  • Components: 30FT x PE Misting Tube, 1 x 1"-3/4” Tap Adaptor, 1 x Joiner Fitting, 1 x Elbow Fitting, 1 x Tee Fitting, 1 x Misting Elbow, 6 x Misting Tee, 6 x Brass/SST Misting Nozzle, 1 x Auto Drain Valve, 5 x Clip Strip, 10 x Nail Clamp.
  • Easy assembly. Leak-proof drain valve. High quality UV treated tubing, resistant to yellowing hydrolysis. Great for cooling your outdoor living areas - The Misting Nozzle is made of precision brass/stainless material with foggy spraying for cooling..
  • Fits US standard tap thread. If you are buying from the country other than USA and Canada, please contact us first for further information..
  • Cooling - The outdoor cooling system provides a cool environment for your favorite outdoor area, reducing the ambient air temperature about 6°C (20°F)..
  • Wide application - atomization cooling system is widely used in gardens, trampoline water parks, landscaping, greenhouses, humidification, outdoor cooling systems, swimming pool atomization cooling, etc..
Check Stock

Allturn Argon CO2 Mig Tig Flow meter Welding Weld Regulator Gauge Gas Welder CGA-580 With 80 6.6FT Hose

  • ✅The Square flow tube reads from 0 - 60 CFH ,which is indicated by a ball which moves up and down in the flow tube.And has large 1 1/2" diameter....
  • ✅Argon / CO2 regulator and flow meter..
  • ✅INLET - CGA580 Bottle Connection for argon and argon, CO2, and helium blend bottles.
  • ✅OUTPUT - Two Female 9/16" x 18 nut and male 5/"8 UNF-18RH fitting and a standard 1/4" barbed fitting..
  • ✅100% HIGH QUALITY AND STURDY - Flowmeter regulator is made of high quality brass and came with 6.6 Ft argon regulator Hose.
Check Stock

15 Pieces Brake Line Fittings (5 Unions, 10 Nuts) - MuHize 3/8' - 24 Threads Assortment for 3/16' Brake Line Tube

  • PACKAGE INCLUDE - MuHize upgraded Brake Line Fittings Replacement (Pack of 15): ① 5 x 3/8-24 threads unions.
  • ② 10 x 3/8-24 threads nuts. Note：Both the unions and nuts are 3/8-24 threads (regular 3/16 inch tube fitting size). Please check before shopping!.
  • INVERTED FLARE UNIOn- Any 2 (3/16 inch) brake lines can be easy to joined with Muhize unions. both the sizes for unions and nuts are both 3/8-24 threads, which is the regular fitting size for 3/16 inch tube..
  • HIGHER QUALITY - MuHize brake line fittings are made of durable brass with unique rust corrosion proofing technology..
  • WIDELY APPLICATION - MuHize 3/8' - 24 threads fittings commonly fits for regular inverted flare/ double flare sizes for 3/16 inch brake lines tube..
  • PROFESSIONAL - MuHize focus on outstanding features and benefits of braking line. 100% brand new & made from excellent materials, and good contact..
Check Stock