Top Brass Valve Fitting

Robinair 18560 A/C and Refrigeration Valve Core Remover/lnstaller

  • Robinair Air Conditioning Valve Core Remover and lnstaller - the ideal tool for replacing damaged valve cores or performing A/C or refrigeration service that necessitates valve core removal.
  • Attaches to 1/4 inch male flare access fittings and allows valve core removal and replacement without loss of refrigerant.
  • Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a slower to operate stem-type valve.
  • Ball valve features a corrosion resistant stainless steel ball for smooth action and a reliable seal.
  • Durable brazed side fitting allows system access for various A/C service procedures.
Check Stock

ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum Carburetor Intake Manifold & Vacuum Test

  • ...tion, safe storage, and quick organization.
  • PACKAGE CONTENTS: Package includes (1) vacuum pressure gauge, (1) 2-foot (61cm) long rubber hose – 13/64-inch ID 23/64-inch OD, (1) brass cone adapter, (1) plastic connector, (1) 1/4”x18 male to 1/8”-27 female brass adapter, (1) 1/8”-27 male to 7/32” barbed brass fitting adapter, (1) 1/8”-27 female to 3/8” male brass adapter, (1) T-type 7/32” barded brass fitting adapter, (1) carrying case, and (1) instruction manual for your convenience.
Check Stock

(KAS) Double Coil Icemaker Water Fill Valve for Whirlpool Kenmore Refrigerator Icemaker 4318046 WV8046 2188542

  • WV8046 Water Valve for 4318046 2188542 Whirlpool Kenmore Refrigerator Icemaker.
  • This valve comes with all the neccesary hardware to replace your existing valve including a plastic 1/4″ compression union, a 1/4″ plastic compression nut, a 1/4″ brass compression nut, 1/4″ brass compression sleeve, a 1/4″ x 5/16″ plastic compression union, a 5/16″ plastic compression nut, a piece of 5/16″ plastic tubing, a piece of 1/4″ plastic tubing, for retro fitting from garden hose connection, a mounting bracket & screws. It has 1/4″ & 5/16″ compression fittings on inlet & 1/4″ on outle.
  • Detailed installation instructions included..
  • Replacement for numbers 2002182, 4210533, 627403, 627431, 627580, 627859, 627890, 627937, 627963, 628164, 628184, 628185, 628238, 628275, 628295, 819493, 850733, 876070, 2188542, AP3103466 and PS358630..
Check Stock

Air Outlet Kit for 3\\/4 Inch Tubing System with 1\\/2 Inch NPT Outlet Port (Base Kit)

  • Material: 6061 anodized Aluminum for the manifold.
  • Brass material with Nickel plating for fitting and drain valve.
  • Working Pressure: 200 psi maximum working pressure.
  • Thread Size: 1/2 NPT threads at on the front, top and bottom of the manifold( 3 ports).
  • Kit includes: Aluminum manifold, Drain ball valve, 1/2 inch NPT straight fitting and PTFE Tape.
  • Installation: Easy installation and the tubing also can be removed if needed.
Check Stock

Hromee Extended Tank Drain Assembly Kit with 10 Inch Braided Steel Hose 1/4 Inch Drain Valve and Elbow Fitting for Air Compressor

  • ...tank to prevent water buildup. Hromee Extended Tank Drain Valve Assembly is perfect for the compressor tank..
  • The valve kit comes with a 10” flexible braided steel drain hose which prevents breaking and kinks. 1/4in. NPT threads at both ends matches 1/4in. NPT male brass fittings. Max working pressure: 175 PSI. Blasting Pressure: 475 PSI. Max Temperature: 200 degrees F..
  • This 1/4 in. ball valve is made of chrome-plated brass for higher corrosion resistance than regular brass or steel, and has a lever handle for on/off to control the flow between pipes, tubes, or hoses. The rubber-wrapped handle is designed for easy-use and labor-saving. This ball valve is pressure rated to 300 PSI at a maximum operating temperature of 212 degrees F..
  • The extended tank drain kit offers a 1/4 in. elbow with pre-applied thread sealant, allowing for attaching the additional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..
  • There is a Hex bushing brass adapter which is 3/8" Male x 1/4" Female for connecting two pipes or with different....
Check Stock

Siphon Pump 1/2" Hand Gasoline Siphon Hose for Gas Fuel Transfer Diesel Water Self Priming Shaker Safe Syphon Pump Auto PVC Sipnon Hoses, 6 Feet

  • ...n and garden, and outdoor activities. Don't suck gasoline into your mouth any more..
  • ♠ATTENTION: Auto siphon inner diameter 0.56"(1.4cm) and outside diameter 0.72"(1.8cm), brass valve end inner diameter 0.8"(2cm) and outside diameter 0.88"(2.2cm), please measure your container before purchasing and ensure suitalbe fitting, no smaller than our hose and brass valve size..
Check Stock

Home Intuition Outdoor Foam Faucet Cover, 3 Pack

  • Easy Installation from Outside of the Barrel, All you need is cut 1-1/4 inch hole. Detailed Instruction and 10 Ft Thread Tape Included..
  • Heavy Duty 4.0 oz Solid Brass Bulkhead Fitting, Female 3/4" NPT Threaded on Both Ends, install spigot on either end. Heavy Duty 6.0 oz 3/4" No Kink Quarter Turn Solid Brass Ball Valve with Garden Hose Hook Up.
  • Bulkhead fitting need 1-1/4 inch diameter hole to install. Fit up to 1/2 inch thickness wall(Works great for 55 gallon used plastic drum barrels on craigslist, these barrels usually have wall thickness of 0.1-0.2 inch). Large 10mm Flow Opening, Great Flow Rate at Approx. 15 Second/Gallon or 4GPM, Tested with 2 ft Water..
  • ATTENTION: REVERSE THREADED FITTING NUT, Turn CLOCKWISE to LOOSEN. Contain less than 0.25% lead, Lead Free Compliant. For more info about lead free compliant, please visit epa.gov. Compare Design, Material, Quality and Choose RAINPAL..
  • Freeze Proof, Life Time Warranty against leak, crack or break..
Check Stock

WADEO Rain Barrel Spigot, Brass Rain Barrel Quarter Turn Ball Valve Spigot with Bulkhead Fitting-Black

  • Two installation methods: Brass bulkhead fittings front mounting and back mounting. Designed for irrigation with Rain Barrel, Not for Portable Water, Not Lead Free Compliant..
  • Heavy Duty 3.2 oz Solid Brass Bulkhead Fitting, 1/2" Female to 3/4" Male water tank connector bulkhead tank fitting. Heavy duty 3/4"water outlet no kink quarter turn solid brass ball valve can conntect with garden hose.
  • Bulkhead fittings need 1 inch diameter holes to install. Fit up to 0.78 inch thickness wall..
  • Tools Needed for Installation: Electric drill, 1 inch hole saw, and pipe wrench or adjustable wrench..
  • Two washers (6.8mm between inner ring and outer ring), which can help you install the rain barrel spigot conveniently and effectively prevent leakage..
Check Stock

Pneumatic Air Hydraulic Pop Rivet Gun Riveter Riveting Tool W/case

  • SV-135 Safety Pop Up Valve 135 PSI ASME CODED.
  • Please contact us if you need more than one. We offer discount on higher quantities..
Check Stock

Lichamp R134a Can Tap, Automotive R 134a Self Sealing Can Tap and Puncture AC Freon Can 134a Adapter Fittings, TA02

  • Freon Can Tap - Smoothly connect manifold gauge hose with the r-134a freon refill cans to properly fill your ac system..
  • Compatibility - Include both r 134a self sealing and puncture style can taps, fits EPA-required self-sealing freon can and the old-style single puncture bottle..
  • Tank Adapter and Valve Core Remover - Comes with extra tank adapter for connecting 1/4" SAE tap fitting to 1/2" ACME hose fitting. Dual head valve core tool will easily remove small or large valve cores..
  • Long Lasting Materials - The can tap are made of solid premium brass and aluminum which make them can even work under extreme conditions, features with industrial grade rubber seals to prevent leaking..
  • Easy to Work - Benefit from precise threading technology and precise valve control, you can assemble and operate efficiently without worrying about loose or leaking connections..
Check Stock

Expandable Garden Hose by InSassy | Brass Fitting Connector & 8 Pattern Sprayer Nozzle | Expanding Hose for Gardening Lawn Watering Automotive & RV 50FT

  • Expanding Garden Hose with Solid Brass Fitting and Shut-Off Valve. Solid Brass Fittings on the InSassy Carbon Garden Hose will not break, crack,....
  • Durability and Lightweight - The Flexible InSassy Carbon Garden Hose is constructed with 5000D Polyester Reinforced Outer Webbing and a Triple Layer....
  • Leak Proof - Manufacturered with Triple Layer Latex Inner Core Tubing, Metal Clamp assembly and Solid Brass Fitting to ensure a leak proof Garden....
  • Kink Free - Our Garden Hose will not Kink, tangle or twist which makes it extremely portable, a breeze to handle and convenient to store unlike....
  • 12 Month Warranty against any Manufacturer Defects under normal usage..
Check Stock

MENSI 1/8 FNPT x 1/4 Male Quick Connect Plug Propane Quick Disconnect Conversion Kit Adapter for Weber Q 100 1000 200 2000 1200 2200 Portable Gas Grill Camper

  • ❤The brass set includes two parts: 1/4" Propane Quick Connect With 1/8" Female Thread Adapter Fitting and one piece 1/8" Female NPT x 3/8" male....
  • ❤ The 3/8" male flare adapter can help you connect your RV extension hose if you have.
  • ❤High Quality Brass fitting and 100% Solid Brass, Two fittings help you save cost.
  • ❤ Suitable for Weber Camper grill model Q100, Q1000, Q200, Q2000, Q1200, Q2200.
  • ❤ Disconnect Design will help you hook up your 1/4" shut off control valve with RV easily.
Check Stock