Top Brass Valve Fittings

Sunluway 6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool and High Pressure Oil Rail Adapters Leak Test Kit Fit for Ford 6.0L Powerstroke Diesel Engine

  • Fitment: Perfectly fit for Ford 6.0L powerstroke diesel high pressure oil system.
  • High Quality: High Quality Machined from Brass or Steel with excellent mechanical and physical properties, these adapter fittings show their high tightness, corrosion resistance and durability.
  • Oil Rail Adapters: Both brass adapters use standard 1/4" NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.
  • IPR Valve Air Test Fitting: This tool has 1/4 inch pipe threads to accept standard air fittings.
  • It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.
  • 100% SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Fittings, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty.
Check Stock

Robinair 18560 A/C and Refrigeration Valve Core Remover/lnstaller

  • Robinair Air Conditioning Valve Core Remover and lnstaller - the ideal tool for replacing damaged valve cores or performing A/C or refrigeration service that necessitates valve core removal.
  • Attaches to 1/4 inch male flare access fittings and allows valve core removal and replacement without loss of refrigerant.
  • Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a slower to operate stem-type valve.
  • Ball valve features a corrosion resistant stainless steel ball for smooth action and a reliable seal.
  • Durable brazed side fitting allows system access for various A/C service procedures.
Check Stock

SharkBite 1/2 Inch Check Valve Push to Connect Brass Plumbing Fitting PEX Pipe Copper CPVC PE-RT HDPE U2008-0000LFA

  • SHARKBITE BRASS CHECK VALVE: This push-to-connect brass check valve allows you to prevent the reverse flow of water quickly and easily.
  • ideal for working in tight spaces **Remove using a disconnect clip or disconnect tongs**.
  • VERSATILE: Pushfit spring-loaded check valves work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass check valves allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • can be installed horizontally or vertically.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • SPECS: Made with DZR forged brass, this check valve can withstand 200 degrees F and 150 PSI.
Check Stock

Thermostatic Mixing Valve with 1/2 NPT Male Connections,Water Temperature Control Valve,Solid Brass

  • US STANDARD FITTINGS -Coming with 3 PCS G1/2 British straight thread to 1/2NPT adapters..
  • Markings in fahrenheit,outlet water temperature range: 68°F -122°F..
  • Premium brass body: one-piece sturdy brass (non-plastics) faucet body ensures quality and longevity..
  • If you need temperature over 100°F, just press the red button while rotating the valve.
  • It’s suitable for to pipe water valve, use for wash basin, bidet, shower, bathroom, washroom, kitchen, wash and etc..
Check Stock

WADEO Rain Barrel Spigot, Brass Rain Barrel Quarter Turn Ball Valve Spigot with Bulkhead Fitting-Black

  • Two installation methods: Brass bulkhead fittings front mounting and back mounting. Designed for irrigation with Rain Barrel, Not for Portable Water, Not Lead Free Compliant..
  • Heavy Duty 3.2 oz Solid Brass Bulkhead Fitting, 1/2" Female to 3/4" Male water tank connector bulkhead tank fitting. Heavy duty 3/4"water outlet no kink quarter turn solid brass ball valve can conntect with garden hose.
  • Bulkhead fittings need 1 inch diameter holes to install. Fit up to 0.78 inch thickness wall..
  • Tools Needed for Installation: Electric drill, 1 inch hole saw, and pipe wrench or adjustable wrench..
  • Two washers (6.8mm between inner ring and outer ring), which can help you install the rain barrel spigot conveniently and effectively prevent leakage..
Check Stock

(KAS) Double Coil Icemaker Water Fill Valve for Whirlpool Kenmore Refrigerator Icemaker 4318046 WV8046 2188542

  • WV8046 Water Valve for 4318046 2188542 Whirlpool Kenmore Refrigerator Icemaker.
  • This valve comes with all the neccesary hardware to replace your existing valve including a plastic 1/4″ compression union, a 1/4″ plastic compression nut, a 1/4″ brass compression nut, 1/4″ brass compression sleeve, a 1/4″ x 5/16″ plastic compression union, a 5/16″ plastic compression nut, a piece of 5/16″ plastic tubing, a piece of 1/4″ plastic tubing, for retro fitting from garden hose connection, a mounting bracket & screws. It has 1/4″ & 5/16″ compression fittings on inlet & 1/4″ on outle.
  • Detailed installation instructions included..
  • Replacement for numbers 2002182, 4210533, 627403, 627431, 627580, 627859, 627890, 627937, 627963, 628164, 628184, 628185, 628238, 628275, 628295, 819493, 850733, 876070, 2188542, AP3103466 and PS358630..
Check Stock

10 Pieces 3/4 Inch Brass Hose Cap Hose End Cap Spigot Cap Garden Hose Female End Cap with 20 Pieces 3/4 Inch Washers for Home Garden Hose

  • What you receive: package comes with 10 pieces 3/4 inch brass hose end cap, 20 pieces 3/4 inch washers, enough quantity to meet your different needs and replacements, you also can store them as backup.
  • Size details: the female brass caps are designed with 3/4 inch inside diameter garden hoses fittings, 3/4 inch female thread fittings and fits for any 3/4 inch male GHT (garden hose thread).
  • Please make sure the size carefully before purchasing.
  • Sturdy material: these garden hose caps are made of solid brass, not easy to break or deform due to sturdy construction, durable and leak-free, can serve you for long time.
  • Suitable usages: suitable for garden hoses, spigot, pipeline valve and other garden watering device accessory to cap off your water hose or valve, also can be applied for on RV’s if you have an exterior drain that takes a female hose fitting to cap it off.
  • No leakage: these hose end caps are fast and easy to operate, so that you can save more installation time.
  • With washers, which can help to plug garden hoses to prevent water leaks.
Check Stock

Hourleey Brass Rain Barrel Quarter, Rain Barrel Spigot Kit 1/2 inch, Rain Barrel Quarter Turn Ball Valve Spigot with Bulkhead Fitting

  • High quality: Heavy-duty solid brass bulkhead fitting, screwed along the 1-1/8 inch internal thread all the way, with spigot installed at both ends. Heavy-duty 1-1/8 inches, no kinks, right-angle rotating solid brass ball valve..
  • Two installation methods: Front mounting and rear mounting of brass bulkhead fittings..
  • Applicable scenarios: Bulkhead fittings need to be installed with 1-inch diameter holes, suitable for the case where the wall thickness does not exceed 1.3 inches..
  • Tools required for installation: Electric drill, 1-1/8 inch hole saw, pipe wrench or adjustable wrench..
  • Intimate help: For helping you easily install the rain barrel quarter and effectively prevent leakage, we provide a gasket..
Check Stock

POWERWORKS PV4 Brake Proportioning Valve Disc/Disc Brake System Combination Valve

  • This PV-4 proportioning valve works on almost any classic truck, or muscle car, and nearly all vehicles that have disc brakes in the front and disc....
  • This proportional valve help you solve the rear lock up problem. This proportional valve / combination valve helps to distribute the pressure sent to....
  • Has standard 9/16"-18 and 1/2"-20 fittings..
  • The connections from the Master Cylinder are 1/2"-20 and 7/16"-24. This proportioning valve made of high-quality brass to ensure the durability,....
  • Under the protection of the brand, the quality of the goods is trustworthy. If you have any questions, you can contact us. We look forward to giving....
Check Stock

Hromee Extended Tank Drain Assembly Kit with 10 Inch Braided Steel Hose 1/4 Inch Drain Valve and Elbow Fitting for Air Compressor

  • ...tank to prevent water buildup. Hromee Extended Tank Drain Valve Assembly is perfect for the compressor tank..
  • The valve kit comes with a 10” flexible braided steel drain hose which prevents breaking and kinks. 1/4in. NPT threads at both ends matches 1/4in. NPT male brass fittings. Max working pressure: 175 PSI. Blasting Pressure: 475 PSI. Max Temperature: 200 degrees F..
  • This 1/4 in. ball valve is made of chrome-plated brass for higher corrosion resistance than regular brass or steel, and has a lever handle for on/off to control the flow between pipes, tubes, or hoses. The rubber-wrapped handle is designed for easy-use and labor-saving. This ball valve is pressure rated to 300 PSI at a maximum operating temperature of 212 degrees F..
  • The extended tank drain kit offers a 1/4 in. elbow with pre-applied thread sealant, allowing for attaching the additional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..
  • There is a Hex bushing brass adapter which is 3/8" Male x 1/4" Female for connecting two pipes or with different....
Check Stock

Tub Shower Faucet Set 5-Spray Rain Shower Head Pressure Balance Valve and Diverter Bathtub Spout, Shower System Combo, Matte Black (Rough in Valve Included)

  • Premium Material - Electroplated Matte Black tub and shower faucet combo set ( rough-in valve & trim kit include ), constructed by high quality brass, no burst or crack in extremely hot or cold environments, performs well with excellent appearance.
  • Steady Temperature - cUPC Certified Pressure Balance Cartridge keeps water temperature constant, brass valve body, standard 1/2" U.S. plumbing connections.
  • 5 Powerful Spray Options - 5-functions 6-inches top rainfall shower head to satisfy all of your showering needs, relieves all day long stress from work and life.
  • Quick Filling Bathtub - 5.3" tub spout length, high flow rate fills tubs quickly.
  • Package Includes - pressure balancing rough in shower valve, valve trim, 5-sprays shower head, shower arm, tub spout with diverter, complete mounting fittings..
Check Stock

Carbon Steel Mini Needle Valve - with Round Knob 1/4\ NPT 6000 PSI DAIRAZAN

  • 【Size】Male Thread 1/4" NPT x 1/4" NPT for connecting female threaded pipe fittings..
  • 【Material】Made of solid brass for strength, corrosion resistance, ductility at high temperatures, and low magnetic permeability. It is nickel plated so that it is anti-rust and corrosion resistant..
  • 【High Quality】High pressure brass needle valve, stable smooth delicate tightness practical. The brass needle valve is clean and bright inside, and the ruler can be controlled accurately. Its exquisite processing, can withstand greater pressure than other types of valves, strong connection, high pressure resistance, good sealing performance and repeatable installation..
  • 【Easy to Use】The product is easy to install and maintain, and it is safe and reliable to work. If you need a long time and stable control, it is best to use it with a regulator..
  • 【Widely Applications】Needle valve is an important part of the instrument measurement pipeline system, used to adjust the flow to the instrument or other industrial applications, open or cut off the pipeline path. Generally used in water, steam, gas, oil and other media with smaller flow and higher pressure. It is often used in industrial automatic control piping systems such as ships, oil refining, chemical, electri....
Check Stock