Top Brazed Carbide Cutter

Lenox Tools 1211932DGHS 32 Diamond Grit Hole Saw 2-Inch or 50.8mm red

  • LENOX Diamond hole saw has a brazed diamond edge for more holes in tile and stone.
  • Diamond-tip hole saw has a durable, robust design for greater versatility in tough applications.
  • Diamond-tipped hole saw cuts holes in less time than carbide-grit or carbide-tipped hole saws.
  • Round holes make removing plugs faster and easier.
  • Uses a 2L, 3L, 6L or 7L standard arbor or a 2L or 6L SNAP-BACK arbor.
Check Stock

CNC Spoilboard Surfacing Router Bit, 1/2\ Shank 2\ Cutting Diameter, Insert Carbide Slab Flattening Router Bit Planing Bit Wood Planer Bit by BINSTAK

  • 3-WING INSERT CNC ROUTER BIT: Shank: 1/2".
  • Carbide Inserts: 12*12mm. 3-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 3 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

CNC Spoilboard Surfacing Router Bit, 1/4' Shank 1' Cutting Diameter, Carbide Insert Slab Flattening Router Bits Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK

  • 2-WING INSERT CNC ROUTER BIT: Shank: 1/4″.
  • Carbide Inserts: 12*12mm. 2-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 2 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

KOWOOD PRO Flush Trim Router Bit(16 Flutes) 1/2\Shank,2\Cut Length

  • KOWOOD Pro flush trim router bit is designed specifically for professional trimming work.
  • This flush trim router bit features 16 individually brazed carbide tips in a compression design in order to eliminate chipping.
  • Multi blade technology can effectively improve work efficiency and tool life.
  • Quality construction, YG8 tungsten carbide blade provides a clean and accurated cut with durable powder coating finish.
  • ▲What You Get▲KOWOOD Pro Flush Trim Router Bit (16 Flutes) 1/2" Shank, 2" Cut Length * 1.
  • 12-Month Service Card. Our after-sales customer service is available at any time. Please feel free to contact us for help.
Check Stock

CNC Spoilboard Surfacing Router Bit, 1/4\ Shank 1-1/2\ Cutting Diameter, Carbide Insert Slab Flattening Router Bits Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK

  • 2-WING INSERT CNC ROUTER BIT: Shank: 1/4".
  • Carbide Inserts: 12*12mm. 2-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 2 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

SILIVN 5pcs Tungsten Carbide Cutters Inserts Set for Wood Lathe Turning Tools,(Include Square, Square With Radius,Round and Diamond Shaped Cutters) Supplied with 5 pcs Screws

  • 【Exterme Hard Material】：Made of solid tungsten steel,providing you a better experience and durable use..
  • 【Most Practical】：Easy to replace your jointers and planers. Unlike standard tools, when using carbide tipped cutter such as these, you keep the cutter straight in on the turning which produces a shearing action.When the carbide cutter finally dulls, simply loosen the screw that holds the cutter in place, rotate the cutter to a sharp, clean edge and then secure the cutter by tightening the screw..
  • 【 Perfect for Professional Carpenters and Beginners】：This is a free combination suit that meets the needs of roughing and finishing cutting, suitable for both professional carpenters and beginners..
  • 【Exteremely Professional】5 different sizes and 4 different shapes carbide inserts satisfy all you demand:Square With Radius (15x15x2.5mm-R50),Square(15x15x2.5mm-4R0.5), Square(14x14x2mm)Diamond Shaped (10mm X 28mm X 2.5mm with Round Point) Round (Ø16mm*3mm-30°).
  • 【Set includes the Cutters only】: Square Cutter *2(Supplied with M6-8 replacement screws ),Square With Radius Cutter*1(Supplied with M6-8 replacement screws ), Round Cutter*1(Supplied with M5-8 replacement screws ), Diamond Shaped Cutter*1(Supplied with M4-8 replacement screws ).....
Check Stock

Glass Cuttings Tools, Professional Glass Cutter with Metal Handle&Oil Reservoir for Cutting Thick Glass and Tiles.

  • [Unique cutter wheel design]: Glass cutter tool with a precision cutter wheel processed by unique technology. Professional precision coordination ensures that the cutter wheel and the cutter plate match precisely, and ensure that there is no deviation during radial cutting, which is convenient for cutting. Zero deviation cutting performance, good bite, not easy to slip..
  • [Industrial-grade glass cutter]: The glass cutter uses cemented carbide and diamond particles, overall heat treatment, high hardness, high cutting precision, sturdiness and durability, and high efficiency. All copper fittings, the cutting life exceeds 100,000 meters..
  • [Self-Lubricating]: Glass cutter with integrated oil reservoir, Long lasting, self-oiling tungsten carbide cutting wheel..
  • [Traditional straight handle design]: Designed for comfort, durability and performance, this industrial-grade glass cutter uses an all-metal handle to ensure user comfort and performance..
  • [Wide application range]: Glass cutter, mirror cutter, tile cutter, glass bottle cutter, thick glass cutter..
Check Stock

Savannah Hollower Replacement Carbide Cutter for Savannah Hollower Carbide Turning Tools

  • Carbide turning tools have a couple of advantages of standard turning tools. One of the most satisfying advantages is that we don’t have to sharpen....
  • Carbide cutters will stay sharper for a longer period of time when compared to standard turning tools. When the carbide cutter finally dulls, simply....
  • Carbide cutters don’t so much cut your wood or material like standard turning tools. The idea is that the razor sharp carbide shears the material to....
  • This cutter comes with two screws that are sized for Savannah turning tools, but depending on your turning tool thread size, you may need to use the....
  • While carbide cutters are designed to be disposed of when they are no longer sharp enough to cut into your material, you can sharpen these cutters by....
Check Stock

Glass Cutter Kit 2mm-20mm, Alloy Handle Mirror Cutter Tool Alloy Scribe Pen for Thick Glass Mosaic and Tiles - Pencil Shape & Design (Glass Cutter) (Regular).

  • Professional Glass Cutter Tool: Specifications: Product Name: Glass Cutter.
  • Material: Carbide cutter wheel, Alloy handle, Cutting Range: 2-20mm..
  • Glass Cutter Package Includes: 2 × Alloy Handle, 1 × 2-6mm Cutting Head, 2× 6-12mm Cutting Head, 1 × 12-20mm Cutting Head, 1 × Oil Dropper, x1 Alloy scribe pen..
  • Easy to use: Anti-skid durable alloy handle reduces wrist fatigue. When pressure is applied, an automatic oil dispensing system keeps the wheel lubricated every time you cut, making the cutting head more fluent and sharp..
  • Premium Carbide glass cutter, The glass cutter adopts an ultra-strong diamond carbide blade with solid hardness and sharp cutting to guarantee smooth operations, 3 Pieces of cutting heads with different sizes in package, 2-6mm, 6-12mm, and 12-20mm, cutting different glass thicknesses..
  • Wide application: It’s perfect for cutting stained glass and other craft and household uses. A must-have cutter tool for DIY projects. It suits mirrors, windows, glass shelves, stained glass cutting, etc..
Check Stock

Walter 01V652 Tungsten Carbide Finishing Bur - 5/8 in X 3/16 in Double Cut Cone Bur with 1/4 in Shank Vibration Free Cutting Tools

  • Durable: made from high-grade tungsten carbide, the carbide bur is suitable for the toughest applications in a wide range of materials. The finishing bur is equipped with a shank for comfortable grip and easy handling.
  • Metal Removal: with perfect concentricity and balance, the cutting tool ensures safe and fast material removal. The double-cut carbide burr runs without vibration, thus providing maximum operator comfort.
  • Finishing Bur: the exclusive tooth design of the metallic burr makes it ideal for working in confined areas. Silver brazed shock absorber significantly reduces the impact on the grinder, preventing it from damage.
  • Double Cut: the surface finishing burr is ideal for use on steel, brass, bronze, cast iron, carbon fiber, plastics, hard rubber, weldments steel, titanium, and other metals. With greater back support, the carbide-cut bur performs well even in most detailed jobs.
  • Specifications: made in compliance with SL-5 USCTI, the tungsten carbide bur ensures safety at high speeds. This cone bur has a 5/8 in. diameter and 3/16 in. length with a 1/4 in. shank diameter.
Check Stock

TCT Hole Saw Set, 16-53mm Tungsten Carbide Tipped Hole, 13 Pcs Carbide Hole Saw Kit with Titanium Plated Pilot Drill Bit for Stainless Steel, Metal, Iron, Wood and Aluminum

  • Safe & Durable: This carbide hole saw set uses variable teeth technology with 3 distinct cutting edge to balance the cutting and make the blades more durable, sharp and more efficient for cutting hard metal..
  • Fasting Cutting: Carbide technology and optimized tooth geometry make hole cutter cut fast in most applications. This carbide hole cutter can precisely cut very smooth holes due to the concentricity rate..
  • Wide Application: 1/2 inch cutting depth makes this stainless steel hole cutter easy to pass through thick material such as: thick metal, stainless steel, iron pipes, aluminum, brass and sheet metal plate..
  • QUALITY MATERIAL: Our hole saw set are Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), Top-grade Titanium-plated cemented carbide Teeth ensures its high hardness, rust proof, sturdy and durable..
  • PACKAGE INCLUDES: The package includes 13 Pcs carbide hole saw: 16mm(5/8”), 18mm(45/64”), 20mm(25/32”), 22mm(55/64”), 25mm(63/64”), 26mm(1-1/32”) 28mm(1-7/64”), 30mm(1-3/16”), 35mm(1-3/8”), 40mm(1-37/64”), 45mm(1-49/64”), 50mm(1-31/32”), 53mm(2-3/32”). A variety of sizes to meet your different needs..
Check Stock

Easy Wood Tools Full-Size Easy Finisher (4200) Woodturning Tool with Round Cutter Scraper Chisel with Replaceable Carbide Insert

  • Ergonomic Hardwood Maple Handle: 18" Maple / Tool Bar: 1/2" x 8.5" / Overall length 24.5" / Max Reach: 4". Comes Mounted with a Ci0 Carbide Cutter.
  • Never sharpen again! When cutter dulls, loosen screw, turn cutter 1/4 turn for new sharp edge, tighten screw down and start turning! . Stays sharp many times longer than steel.
  • Optional Cutter Available: Ci0-NR Patented Negative Rake Round Carbide Replacement Cutter. Negative Rake Carbide Cutters are AWESOME for turning resins, acrylics and extreme hardwoods.
  • Easy Wood Tools have a lower cost of ownership due to all you need is a lathe and Easy Wood Tools.
  • no need to purchase expensive re-sharpening equipment, plus our tools will not get shorter like high-speed steel which will eventually need replacing. Our tools are also safer due to turning on centerline = no catches..
  • Designed and Manufactured 100% in the USA.
Check Stock