Top Brazing Rod For Steel

Hot Max 24181 1/8-Inch by 36-Inch Low Fuming Bronze Brazing Rod, Flux Coated, 6-Pack

  • Excellent quality, easy flowing, low fuming brazing rod for nearly all your brazing needs.
  • 65,000 PSI tensile strength. Melting Point: 1,600° F (871° C).
Check Stock

20 Sticks Aluminum Welding Rods ，20″*φ0.06″ Aluminum Brazing Rods Low Temperature 550℃/1022℉，Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair

  • 【Closed Packaging】 GEOYLE brazing rods portable transparent sealed tube packaging, package contains 20 extra long 1/16″ x 20″ aluminum brazing rods. weight about 50g, longer size for your use. The lids at both ends can be opened for easy storage and portability..
  • 【Good Welding Fluidity】 Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile strength (RM): 130N/mm². aluminum brazing rods electrodes have good flow during welding and can flow into narrow gaps. The welding effect is completely flat..
  • 【Material】The low temperature aluminum welding rods. The composition of the solder: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%. for welding aluminum, aluminum alloys, aluminum-magnesium alloys and other white metals with high strength, good forgeability..
  • 【Wide Application】Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • 【Quality Service】 When you encounter problems in the process of using the aluminum brazing rod, please contact us immediately, we will solve all....
Check Stock

WeldingCity 4-pcs Low Temperature Flux Cored Zinc/Aluminum (Zn98-Al2) Brazing Rod 20″ for Joining Al-Al/Cu Alloy in HVAC/Heat Exchanger

  • Premium quality flux cored low temperature Zinc/Aluminum 20″-long brazing rods Zn78-Al22, Zn98-Al2 and Zn92-Al8 series for joining Al-Al and Al-Cu alloy in HVAC, heat exchanger and refrigeration repairs..
  • Flux core means no manual flux application required. Non corrosive flux and ensures good oxidation protection and capillary fill. Ideal for joining aluminum alloys of the 1000, 3000, and 6000 series as well as aluminum to copper welding..
  • Good replacement to equivalent products such as Lucas Milhaupt AL822/AL802 and Harris Aluxcor Zinc-Aluminum brazing filler metals, etc..
  • Brazing rod dimension: 20-in (500mm) length and .078″ (2.0mm) diameter.
  • brazing temperatures as shown in spec. table in picture. Available packages: 4-pcs, 1/2-lb and 1-lb..
  • U.S. based welding supplier. Strong technical support with experienced customer service to address buyer’s any question..
Check Stock

Goss KA-725-M12P Welding and Brazing HVAC Torch Tool Kit with Stand for \MC\ Acetylene Tanks

  • ...des enough range for working around, the included handy clip helps to hang the gas cylinder to any convenient places, gives you more move freedoms and working safety Patented Super Swirl flame tip and combustion system are specially designed to provide powerful turbo cyclone flame, resists flame blowout and reduces brazing time by 30%. Improve capacity to burn medium to relatively large copper or other metal pipes..
  • Ergonomically designed handle installed with build-in trigger start system to make it super easy to ignite the flame. Brass constructed threading regulator assure durability and reliability, pressure regulated for consistent performance even when tiled or momentarily inverted. adjustable flame control knob can easily sized flame for different applications.
  • Added 15% Silver into Phos-Copper brazing rods.A solder rod with 15% silver added can be liquid phase temperature down to 1472°F. The temperature at which it melts from a solid to a liquid is 1472°F..
  • Each 0.5 lb tube contains 19 sticks of 14" brazing rods. Significantly lower melting point:A solder rod with 15% silver added can be liquid phase temperature down to 1472°F. The melting temperature from solid to liquid is 1472°F..
  • Enhanced metallicity: The addition of silver will improve t....
Check Stock

21 Sticks BLUEFIRE BCuP-2 Half 1/2 lb Self Fluxing Phosphor Copper Brazing Alloy Welding Rods No Need for Flux 0.050 x 1/8 x 14 Industry Professional Grade Propane Gas Soldering Torch Supply

  • Self Fluxing: USA USA AWS A58 Class: BCuP-2 brazing alloys rods. Contents: Phosphor (P): 6.6-7.4%.
  • Copper (Cu): Rest. This brazing alloy is close to eutectic crystal composition. It is self fluxing and do not need any brazing flux when soldering copper to copper or copper to brass joints, while for brazing brass to brass parts, Bluefire JFB-102 brazing flux is recommended for best results..
  • Valued Pack: Each tube contains 21 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight. GREAT SAVING!.
  • Best Performances: Solidus Temperature: 1310°F / 710°C, Liquidus Temperature: 1508°F / 820°C. Recommended joint clearance: 0.002"/0.007", Fluid Rating: 5. JCuPB brazing rods contain lesser phosphors, resulting a much better plastic performances and a little higher melting points..
  • Versatile: A popular and economic solution for HVAC, Plumbing and Mechanical repairing. Ideal for gas welding, MIG and TIG welding, contact welding, HF brazing and some furnace welding. Perfect for brazing Copper to Copper, or Brass and Bronze joints in A/C, freezer, evaporator, heat exchange, water heater and etc. Cannot be used to weld iron or steel parts..
  • High Quality: All Bluefire brazing alloys are manufactured under highest quality control. Equivalent to HARRIS 0 PN0....
Check Stock

Bernzomatic NS3 Nickel-Silver Flux Coated Brazing/Welding Rods, 2-Piece

  • 2 pack, nickel silver brazing rod, 85,000 psi tensile strength, 1680 degree to 1750 degree working temperature.
  • Nickel-silver flux coated brazing/welding rods perfect for repairing bicycles, metal furniture, railings, and radiators.
  • Used in joining carbon and alloy steels as well as non-ferrous materials.
Check Stock

Fox Alloy 20pcs Copper Brazing Rods BCuP-2 (5/64\) 2mm Phosphor Round Self Fluxing Copper Welding Rods Sticks TIG Arc Pipes for Air Conditioner Refrigerators

  • Material: The package includes 20PCS 2.0mm cooper brazing rods BCuP-2 brass welding rod.
  • Standard: The copper welding rods kit conforms to AWS A5.8.
  • Advantage: The low temperature phosphor copper welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 640-770℃, good fluidity during welding, molten metal can flow to small gaps.
  • Application：The stick TIG welding rods is used for brazing of copper & copper alloy in motors, air-conditioners, meters, and refrigeration industry.
  • Service: Fox Alloy Time-proven formulation.
  • A team of experienced welding engineers ready to answer all your welding questions..
Check Stock

Witonics Capacitor Replacement Kit for Hyundai X93W with Soldering Tools

  • Professional contractor grade oxyacetylene welding and brazing outfit.
  • Two Welding/Brazing Tips for brazing up to 1-Inch copper tubing and welding up to 1/8-Inch steel.
  • Single stage Patriot series regulators with protective rubber gauge boots.
  • Front valve welding handle with stainless steel ball point valves for accurate gas control.
  • Welding Goggles with flip up lenses and are designed to accommodate prescription eyewear.
Check Stock

Uniweld KC100P Centurion Weld Braze Outfit with 511 Plastic Carrying Stand brass copper blue

  • Professional contractor grade portable oxyacetylene welding and brazing outfit-Tanks not included (Sold Separately).
  • Two Welding/Brazing Tips for brazing up to 1-Inch copper tubing and welding up to 1/8-Inch steel.
  • Single stage Centurion series regulators with protective rubber gauge boots.
  • Front valve welding handle with stainless steel ball point valves for accurate gas control.
  • Welding Goggles with flip up lenses and are designed to accommodate prescription eyewear.
Check Stock

K-T Industries 2-2750 Brazing Flux, 0.5 lb

  • Price For: Each Tensile Strength (PSI): - Type: - Contents: 56% Silver, 22% Copper, 17% Zinc, 5% Tin Container: - Application: For Ferrous and Non Ferrous Alloys Good for Stainless Steel Includes: 1 oz Brazing Wire and 1.75 oz White Flux Item: Brazing Kit Material: Safety-Silv-56 Dia. (In.): 1/16 Length (In.): - Brazing Range (F): 1145 to 1205 Standards: AWS A5.8, Bag-7, NSF 51.
  • Country of Origin (subject to change): United States.
Check Stock

Uniweld RHP400 Nitrogen Regulator with 0-400 PSI Delivery Pressure CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection 4-Pack

  • Professional contractor grade portable oxyacetylene welding and brazing outfit-Tanks not included (Sold Separately).
  • Two Welding/Brazing Tips for brazing up to 1-Inch copper tubing and welding up to 1/8-Inch steel.
  • Single stage Patriot series regulators with protective rubber gauge boots.
  • Front valve welding handle with stainless steel ball point valves for accurate gas control.
  • Welding Goggles with flip up lenses and are designed to accommodate prescription eyewear.
Check Stock

Yescom DOT Portable Weld Torch Tank Kit Twin Tote Oxygen Acetylene Oxy Cutting Brazing Welding Goggles

  • [Multifunctional]: This Portable Welding Oxygen/Acetylene Torch Kit comes with oxygen/acetylene regulators, tanks and a brass torch, ideal for steel welding, brazing, cutting, bending and forming in light duty industrial settings such as automobile repairing.
  • [Portable Design]: Comes in a convenient, all-in-one portable design for easy storage and transportation, including a handy suitcase with an ergonomic and firm handle for easy carrying.
  • [Safety First]: Comes with DOT certification for the gas cylinder, which is made of sturdy and seamless steel in order to avoid heat inflation, ensuring safe usage at all times. Includes square goggles to protect the eyes and expand your field of vision while in use.
  • [Durable]: Comes with ST14 steel gas cylinder, copper welding rod, tough brass torch handle for enhanced durability and a long service life.
  • [Wide Application]: Perfect for industrial or artistic use by automobile repairmen, air conditioner repairmen, maintenance personnel, home artists, etc. for automotive, air conditioning and refrigerator repair or artistic metal sculpting.
Check Stock