Top Breadboard Compatible

YUEONEWIN 130 Pcs Breadboard Jumper Wires Kit 4pcs 400 & 830 Points Solderless PCB Breadboards and 126 Pcs Flexible Bread Board Jumper Wire Set for Arduino Prototyping Circuit DIY Electronic Project

  • 【Package Included】Solderless Breadboard Kit includes 2pcs 400-point breadboard, 2pcs 830-point breadboard and 126 pcs flexible breadboard jumpers,....
  • 【Material】400 and 830 connection point breadboards are made of high-quality ABS plastic panels and high-grade tin-plated phosphor bronze contacts,....
  • 【Design】There are metal strips under the breadboard board to connect with the holes on the top. Note that the top row of holes and the bottom row....
  • 【Wide Applications】This breadboard jumper kit can use 20-29 Awg (0.3-0.8mm) wires to interconnect any components, ideal for setting up test....
  • 【Service Guarantee】If you have any questions about these solderless breadboard kits, please feel free to contact us and we will reply within 24....
Check Stock

DORHEA 4Pcs for Nano V3.0 ATmega328P Nano Board CH340 5V 16M Micro USB Microcontroller Board with PIN Headers Pin Unsoldered Compatible with Electronics Development Board Nano 328P Nano 3.0

  • The Nano for motherboard can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
  • The nano has 8 analog inputs,each of which provide 10 bits of resolution.By default they measure from ground to 5 volts, though is it possible to change the upper end of their range using the analogReference function. Analog pins 6 and 7 cannot be used as digital pins, some pins have specialized functionality..
  • It is a smallest, complete and breadboard friendly board. It has everything that board has (electrically) with more analog input pins and on board +5V AREF jumper, compatible with Windows, Mac and Linux operating system..
  • More breadboard space:Nano's got the breadboard-ability of the Mini USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND ）on one top, power and ground on the other..
  • This board is using the chips ATmega328P and CH340, not FT232, Support ISP download.
Check Stock

Aoicrie Jumper Wire Kit, 840 Pieces Preformed Breadboard Jumper Wire Kit,14 Lengths Assorted Jumper Wire for Breadboard Prototyping Solder Circuits

  • This kit is the most complete Breadboard Jumper Wires set which contains high quality assorted U-Shape Jumper Wires, assorted solderless flexible jumper cables, tweezer, with which you can do all kinds of circuit experiments..
  • 2 mm, 5 mm, 7 mm, 10 mm, 12 mm, 15 mm, 17 mm, 20 mm, 22 mm, 25 mm, 50 mm, 75 mm, 100 mm, 125 mm. Note: The kit may also be equipped with a 26AWG jumper..
  • Easy to use : each jumper has stripped ends and preformed right-angled leads for easy insertion into your breadboard ,all the colored jumper wire are pre-stripped and preformed right-angled, easy to insert it into breadboard..
  • Wide Application : designed to work well with any breadboards or anywhere jumper wires are needed, perfect for breadboard projects these breadboards wires are ideal for use with any breadboard, prototyping, prototype circuits, LED strip, test circuits and etc..
  • Package includes : contains 840 pieces U shape preformed breadboard jumper wire kit, 14 lengths, 60 pieces per size,Note: the breadboard wire is a little soft that convenient for changing its shape to do connect test.
  • if you find that it can't be inserted, please check whether the cable in the pin hole of a breadboard is in good condition or not.come with a f....
Check Stock

The Complete Country Guitar Method Compilation: Three Books in One! - Master Country Guitar Licks, Techniques & Soloing (Learn How to Play Country Guitar)

  • ...ou need an older driver, pls get it from GitHub—please read the link that follows immediate. http://sparks.gogo.co.nz/ch340.html.
  • More detals on how to use it please refer to: http://audiodiwhy.blogspot.com/2018/05/one-cheap-arduino-nano-clone-o-plus-one.html.
  • Small Arduino UNO Board:It is a smallest, complete and breadboard friendly board. It has everything that Arduino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper.More Breadboard Space:Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)..
  • Specification:The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version..
Check Stock

SIM&NAT 12inch / 30cm 40 Pin Male to Female Dupont Wire, 40 Pin Male to Male, 40 Pin Female to Female Breadboard Jumper wire Ribbon Cables kit for Arduino Raspberry Pi 2 / 3 (120 PCS)

  • The pitch of each end of the wire is 0.1 inch (2.54mm).
  • 40 pin jumper Wire are easy to separate from the ribbon.
  • Suitable for Arduino breadboard kit project, PCB project, PC motherboard, DIY experiment, 3D printer and etc..
  • Package content: 1 * 40 pin male to female jumper wires, 1 * 40 pin male to male cable and 1 * 40-pin female to female cable (total 120pcs)Description.
  • The wires are easy to peel apart and great for making good looking prototypes.
  • Work on a Raspberry pi breadboard projects, Raspberry pi robot build, Breadboard prototyping, Arduino and ky-040 rotary encoders..
  • Insert onto the SW LED pin on the typical desktop computer mother board..
  • Test bread boarding projects or for any breadboard experimenter..
  • 1 * 11.8 inch 40 pin male to male Breadboard Jumper Wires.
  • 1 * 11.8 inch 40 pin female to female Breadboard Jumper Wires.
  • 1 * 11.8 inch 40 pin male to female Breadboard Jumper Wires.
Check Stock

Treedix Compatible with Raspberry Pi 3B/3B+/4B GPIO Breakout Expansion T-Type Board with 20cm FC40 40pin Cable Development Board

  • The small board is connected to the 40-pin GPIO connector on the Raspberry Pi, and these pins are assigned to a breadboard-friendly layout and spacing.
  • T-shaped expansion board and breadboard make the experiment more convenient.
  • Using the GPIO expansion board, you can connect all versions of the Raspberry Pi to various sensors and electronic components.
  • Purpose: It can be used for the pin experiment of the experiment board, adding experimental items, etc., and it can be connected to the pin very reliably by simple soldering by yourself. 5. Strong compatibility: suitable for Raspberry Pi 3B/3B+/4B, 100% compatible with Raspberry Pi.
  • Strong compatibility: suitable for Raspberry Pi 3B/3B+/4B, 100% compatible with Raspberry Pi.
Check Stock

Gikfun Solder-able Breadboard Gold Plated Finish Proto Board PCB DIY Kit for Arduino Pack of 5PCS GK1007

  • This board is especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering all the pieces in....
  • Breadboard PCB for any type Raspberry Pi GPIO.
  • Gold plated finish prevents oxidation, High quality Gold finish for easy soldering.
  • All holes are through-plated for strength.
  • Adaptable with a variety of MCU boards. Compatible with Arduino Nano, Pro Mini, NodeMCU, etc..
Check Stock

REXQualis Accessories kit Compatible with Raspberry Pi 4 3B+ 3B 2B B+ A+ Zero w/Solderless Breadboard + GPIO T Type Expansion Board + Jumper Wires + Rainbow Ribbon Cable + Resistors

  • This kit is compatible with the Raspberry Pi 4 3B+ 3B 2B B+ A+ Zero..
  • The GPIO expansion board is in a fancy T-shape, compatible with all 40-Pin Raspberry Pi Models..
  • High Quality Solderless Breadboard: 830 tie-points and 400 tie-points Solderless Breadboard, 2 independent power rail sets in total Adhesive backing Solid construction..
  • Jumper Cable Wires Kits: 65 pcs several lengths Male to Male jumper wires, 40pin Rainbow Ribbon Cable and 20pin Male to Female jumper wires, Makes wiring a cinch,meet all your needs..
  • Perfect Packaging: Sturdy plastic case can more perfectly protect product not damaged during transportation..
Check Stock

Treedix Breakout Board Module with Pin Header for Teensy 3.5/3.6 Compatible with Arduino

  • The breakout board expands the connection with all the processor functions. The breakout board is well-made, gold-plated on both sides to prevent oxidation..
  • All pins on the breakout board are accessible, Teensy3.5 is compatible with arduino integrated development environment (IDE).
  • Simple and easy to assemble, can be used in conjunction with a breadboard, the spacing between the holes on the board: 2.54mm.
  • The breakout board module can easily extend the Teensy 3.5/3.6 project to industrial control, home automation or other applications..
  • Note: The package is not include Teensy development board and breadboard.
Check Stock

AUSTOR 840 Pieces Preformed Breadboard Jumper Wire Kit 14 Lengths Assorted Jumper Wire for Breadboard Prototyping Solder Circuits

  • Package includes: contains 840 pieces U shape preformed breadboard jumper wire kit, 14 lengths, 60 pieces per size.
  • Wire Length: 2 mm, 5 mm, 7 mm, 10 mm, 12 mm, 15 mm, 17 mm, 20 mm, 22 mm, 25 mm, 50 mm, 75 mm, 100 mm, 125 mm.
  • Easy to use: each jumper has stripped ends and preformed right-angled leads for easy insertion into your breadboard.
  • Wide Application: these breadboards wires are ideal for use with any breadboard, prototyping, prototype circuits, LED strip, test circuits and etc..
  • Note: the breadboard wire is a little soft that convenient for changing its shape to do connect test.
  • if you find that it can't be inserted, please check whether the cable in the pin hole of a breadboard is in good condition or not.
Check Stock

DaFuRui Breadboard Jumper Wire Kit with 400-Point Breadboard、65pcs Multiple Sizes M/M Bread Board Jumper Wire、140 Pieces 2-125 mm U-Shape Preformed Jumper Wire Kit

  • ★【Excellent Quality】The kit is ideal for setting up a trial circuit, prototype or experimenting.A variety of colors, lengths, can be classified....
  • ★【Powerful Function】400 tie-points Solderless Breadboard, With self-adhesive tape on the back for easy bonding.65pcs 4.4in 6.3in 8.3in 10.3in....
  • ★【Easy to Install】The Breadboard Helper includes 2/5/7/10/12/15/17/20/22/25/50/75/100/125 MM 14 different lengths.Different colors: 140Pcs long....
  • ★【Widely Used】Can be used for wiring of breadboard circuits or where power or circuit connections.Proto-Typing Circuit，Electronic，Electrical....
  • ★【Package Content】1PCS 400 tie-points Solderless Breadboard，65PCS long and short solderless breadboard jumper kit，140Pcs 14 different....
Check Stock

Breadboard Wires Jumper Wires Dupont Cable 120pcs Multicolored 20cm 40 pin Male to Female,Male to Male,Female to Female Breadboard Jumper Wires Ribbon Cables Kit

  • Jumper Wires Kit,Michael Josh Electrical Solderless Breadboard Ribbon Cables.
  • The Jumper Cable can be separated according to the demand.
  • Compatible with 2.54mm spacing pin headers,and to support non-standard odd-spaced headers.
  • Great for Arduino breadboard kit projects,Portable design, easy and safe to use.
  • In the terminals have not damaged it can be reused, if damaged can also be used for soldering.
Check Stock