Top Brick Anchor Bolts

M8 x 80mm 304 Stainless Steel Expansion Bolt 10-Pack External Hex Expansion Screw Bolt(10 pcs)

  • 1. Material : Expansion Sleeve Bolts made of 304 Stainless Steel, sturdy and firm , resistant to rust and corrosion..
  • 2. High Quality: Anchor Expansion is suitable for using indoor, outdoor even in humid environment, wear-resisting, anti-corrosion, high rust resistance..
  • 3. Standard size: M8x60mm expansion bolt. M8 Thread Diameter, Total Length 2.4inch, Expansion Tube Diameter 12mm..
  • 4. Easy to Install: Expansion Bolts come with nuts and washers. Concrete anchor and masonry anchor , easy to be mounted..
  • 5. Widely Application: Expansion Bolts is widely used in fence, burglarproof doors and window, home decoration, engineering, canopy and air conditioning rach fixation..
Check Stock

The Hillman Group 260288 1 1 1 1/2 x 8-Inch Anchor Bolt, 50-Pack

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Qty 6 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

TRX Training XMount Mounting Anchor Suspension Trainers V4 Training Club App, Grey

  • SUSPENSION-TRAINER WALL ANCHOR: This is the ultimate anchor for full range of motion. This anchor secures to your ceiling or wall for maximum stability. It’s a great permanent wall hanging kit..
  • WHAT’S IN THE BOX: This wall anchor kit comes complete with 2 bolts for mounting. The unique X design allows you to hang multiple straps. The durable powder-coated steel is indoor- and outdoor-ready, and the plastic backing reduces nicks and scratches..
  • EASY INSTALLATION: This kit mounts to any load-bearing wall or ceiling stud with the included bolts. It can be set up inside or outside, and the powder-coated steel makes it low key. You can transform any space into a training environment!.
  • FOR ALL FITNESS LEVELS: We have a suspension training system for everyone, and our exercise accessories can perform in the gym or at home. Whether you’re a seasoned pro, a beginner, or ....
Check Stock

48 Pieces Heavy Duty Toggle Bolts, Wall Anchors & Screws for Drywall, 1/4 Inch, 1/8 Inch, 3/16 Inch (3 Sizes)

  • Screws and Drywall Anchors Heavy Duty: These anchors and screws can be used on hollow brick, gypsum board, cement fiber board, wood board, and other hollow materials.
  • Perfect For: The heavy duty drywall anchors and screws can be used to install lighting fixtures, curtain rods, and photo frames.
  • 3 Sizes: The largest drywall anchor screw measures 1/4 x 3 inches, the medium size measures 3/16 x 3 inches, and the smallest measures 1/8 x 2 inches.
  • Durable Material: These toggle bolts and anchors are made with a plated carbon steel and coating which is perfect for hanging heavy items on drywall such as coat racks and flower pot..
  • What’s Included: This set includes 24 of 1/8 inch wall anchors.
Check Stock

Qty 25 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolts, Wall Anchor Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Anrik 1\\/4 inch x 2-1\\/4 inch - 20 Pieces Wedge Anchor Zinc Plated Heavy Duty Fastener for Concrete

  • Wedge anchor diameter: 1/4" | Length: 2-1/4" | Qty: 20 pieces. Our wedge anchor is made from high quality carbon steel, and is zinc plated to prevent rust.
  • Drill bit diameter/Hole diameter is the same as anchor diameter. Use a 1/4" drill bit to drill a hole in the base material (Concrete only).
  • The wedge anchor is a torque-controlled, wedge expansion anchor. The required installation torque of the anchor is 4 ft/lbs..
  • The concrete anchor is for heavy duty fastening applications where high pull out values in concrete are needed. It is for concrete only, not for block or brick base material.
  • The wedge anchor is used in fastening sheet metal, steel and aluminum angles, or wood to concrete. The wedge anchor is ideal for structural anchorage, storage racking anchorage, machinery and hand rails installation.
Check Stock

HVU 7/8 x 6-5/8 Complete Capsule Anchor System, Pack of 5

  • Lattice structure of anchor sleeves lowers mortar consumption..
  • Anchor sleeve allows for optimum mechanical interlock in perforated brick..
  • The centring blades fix anchor rods with various diameters. This lowers complexity and simplifies storage..
  • Barbed hook: no falling with overhead installations. ETA approval..
Check Stock

Hilitchi 122 Piece Plastic Self Drilling Drywall Hollow-Wall Anchor Molly Bolt Toggle Bolt with Screws Kit

  • This anchor set is perfect for mounting a wide variety of objects in drywall and other surfaces where simple fasteners are impractical..
  • Set includes plastic self drilling hollow-wall anchor, molly bolt, toggle bolt with self-tapping screws.
  • The ribs on the plastic anchors prevent the anchor from turning in the hole during installation.
  • The molly bolts Hollow wall anchors with pointed ends can pierce drywall using just a hammer.
  • These toggle bolts are anchors for use in hollow walls and hollow masonry applications.
Check Stock

Nylon Mushroom Head Drive Pin Nail-in Anchor 3/16 x 1-1/2 200 Pieces

  • Nylon mushroom head drive nail-in pin for anchoring and redundant fastening in concrete, block, brick or stone..
  • Anchor Diameter: 3/16". Anchor Length: 1-1/2"..
  • Nail Material: Steel. Anchor Body Material: Nylon..
  • Please see all available products by PHAT SATELLITE INTL.
Check Stock

BoltHold - SP12-38 Zinc Plated Steel Asphalt Anchor (5/8\ x 12\) - with 1\ Hex Bolt & Washer - Chemical Anchors - for Installation of Sheds, Carports, Bike Racks, & More - 2000 lb Pull Rated - 6 PK

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Antsky T316 Stainless Steel (Marine Grade) Wedge Anchor Bolt (3/8\×3-1/2\

  • 【Marine Grade】Antsky wedge anchor bolts are made from high quality 316 STAINLESS STEEL, it's rust resistance, can last long in wet and humid environments;.
  • 【Diameter】The OD of the anchor is 3/8'', the total length is 3-1/2" , the length of the threads on the anchor is 2";.
  • 【Black Painting】Our anchor's surface is electric painted into black colour, which is special made for longer working life and stylish looking;.
  • 【Application】This anchor is designed to use in concrete、rocks etc. base material;.
  • 【Note】The anchor requires a pre-drilled hole in the base material, which must be same size as the OD of the anchor, we suggest to use a 3/8'' drill bit..
Check Stock