Top Bridge Reamers
5/8 Bridge Reamer Bridge/Construction Reamer 1/2 Shank M2 HSS Taper Chucking Reamer Bit Tool for Steel Metal Alloy Wood Plastic Drilling Hole
- Material: 5/8 bridge reamer is made of high-quality M2 HSS steel, with high toughness, high-temperature resistance, corrosion resistance and long service life. Compared to other commonly used low-grade high-speed steels, M2 has an increased content of tungsten and molybdenum, both key elements for improved durability.
- Wide Application: HSS bridge reamers can enlarge or align existing holes and are suitable for various materials such as aluminum, brass, bronze, cast iron, copper, iron, metal, nickel, plastic, steel and other structural materials Note: It requires existing holes Or a pilot hole is required.
- Size Infor: Length of chucking reamer is 6.5 inch.
- Safe to Use: Designed with helical flutes and safety stops to keep chips away from the operator. The safety collar stops to prevent over-penetration and loss of operator stability.
- Design: The tapered tip design allows the reamer to fit into unevenly overlapping holes, aligning the bolt holes. The 5/8" bridge reamer is not a drill, it just aligns the reamer with the pre-drilled hole.
Check Stock5/8 Drill Bridge/Construction Reamer with 1/2 Shank Chuck,HSS Taper Bridge Reamer Bit Tool for Steel Metal Wood Alloy to Align Existing Hole and Enlarge Hole
- The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our reamer bit aligns and enlarges pre-drilled holes ready for bolting..
- Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be a existing hole or a pilot hole that is smaller than 5/8" before using our 5/8" Bridge/Construction Reamer..
- The tapered point design permits the reamer bit to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm..
- The 5/8" bridge reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to expand a hole to 5/8". At first there must be a 3/8" pre-drilled hole,then ream out to 5/8"..
- Commonly used in bridge,construction,steel erection and automotive truck trailer industries,specially use in structural materials such as steel, metal, alloy aluminum,brass,plastic,iron,nickel,copper,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools..
Check Stock11 Set High Speed Steel Adjustable Hand Reamers, H4-H14, 15/32\ to 1-1/2\
- accuracy class: H8. The hand reamers ream the cylindrical shape. Good for general purpose applications..
- Material and Coating: Made of alloy tool steel, the reamers have high hardness, durability, and provide finish cuts. Features just the base substrate without any coatings, suitable for wide ranges of applications..
- Wide Applications: Used for processing, handicraft processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, and other soft materials..
- Easy to Use: Can be hand operated by use of wrenches. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use..
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts..
Check Stockuxcell 1/8\ Hand Reamer H8 Accuracy Alloy Tool Steel 6 Flutes Straight Shank Milling Cutter Tool
- accuracy class: H8. The hand reamers ream the cylindrical shape. Good for general purpose applications..
- Material and Coating: Made of alloy tool steel, the reamers have high hardness, durability, and provide finish cuts. Features just the base substrate without any coatings, suitable for wide ranges of applications..
- Wide Applications: Used for processing, handicraft processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, and other soft materials..
- Easy to Use: Can be hand operated by use of wrenches. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use..
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts..
Check Stockuxcell 5/8\ Hand Reamer H8 Accuracy Alloy Tool Steel 6 Flutes Straight Shank Milling Cutter Tool
- accuracy class: H8. The hand reamers ream the cylindrical shape. Good for general purpose applications..
- Material and Coating: Made of alloy tool steel, the reamers have high hardness, durability, and provide finish cuts. Features just the base substrate without any coatings, suitable for wide ranges of applications..
- Wide Applications: Used for processing, handicraft processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, and other soft materials..
- Easy to Use: Can be hand operated by use of wrenches. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use..
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts..
Check Stockuxcell 3/16\ Hand Reamer H8 Accuracy Alloy Tool Steel 6 Flutes Straight Shank Milling Cutter Tool
- accuracy class: H8. The hand reamers ream the cylindrical shape. Good for general purpose applications..
- Material and Coating: Made of alloy tool steel, the reamers have high hardness, durability, and provide finish cuts. Features just the base substrate without any coatings, suitable for wide ranges of applications..
- Wide Applications: Used for processing, handicraft processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, and other soft materials..
- Easy to Use: Can be hand operated by use of wrenches. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use..
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts..
Check Stockuxcell 3/4\ Hand Reamer H8 Accuracy Alloy Tool Steel 8 Flutes Straight Shank Milling Cutter Tool
- accuracy class: H8. The hand reamers ream the cylindrical shape. Good for general purpose applications..
- Material and Coating: Made of alloy tool steel, the reamers have high hardness, durability, and provide finish cuts. Features just the base substrate without any coatings, suitable for wide ranges of applications..
- Wide Applications: Used for processing, handicraft processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, and other soft materials..
- Easy to Use: Can be hand operated by use of wrenches. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use..
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts..
Check Stock4Pcs Drill Bridge/Construction Reamer Bit Set 3/8 1/2 5/8 3/4 with 1/2 Shank HSS Taper Chucking Reamer Bit Tool for Steel Metal Wood Alloy Drilling Hole with Aluminum Box
- What it does: Heavy-duty high-speed steel bridge reamers,expand or align existing holes through mild steel, alloys, aluminum, wood, plastic, fiberglass, or any material of similar hardness prior to rivet or bolt installation, Deburring and trimming of holes in structural materials.
- Application: Especially for steel, metal, alloy aluminum, brass, plastic, iron, nickel, copper, cast iron and other structural materials.
- Design: Tapered point design allows reamer bits to enter irregular overlapping holes, aligning bolt holes.
- Includes: 3/8" (fits 3/8'' shank collets), 1/2", 5/8" and 3/4" (fits 1/2'' shank collets).
- Design: Tapered point design allows reamer bits to enter irregularly overlapping holes, aligning bolt holes.
- three symmetrically placed flats on shank provide a secure grip for portable power and air tools.
Check Stockuxcell Hand Reamers Set H8 Accuracy Alloy Tool Steel 6 Flutes Straight Shank Milling Cutter Tool 10pcs (3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm)
- Specifications: cutting diameter: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm.
- accuracy class: H8. The hand reamers ream the cylindrical shape. Good for general purpose applications..
- Material and Coating: Made of alloy tool steel, the reamers have high hardness, durability, and provide finish cuts. Features just the base substrate without any coatings, suitable for wide ranges of applications..
- Wide Applications: Used for handicraft processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, and other soft materials..
- Easy to Use: Can be hand operated by use of wrenches. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use..
- Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts..
Check Stock.196\ Diameter Carbide Tipped Chucking Reamer, 56551960
- Chucking Reamer: Size: 4mm, 5mm, 6mm, 8mm, 10mm.
- tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications.
- Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
- Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
- Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
- How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Check StockProctor Silex 66332 Juicit Citrus Juicer
- MAKE FRESH, DELICIOUS JUICE AT HOME: Easily make your own fresh juice using fruits like oranges, lemons, limes, and grapefruit. The juicer includes 2 reamers for both large and small citrus fruit..
- SELF-SELECT THE PERFECT AMOUNT OF PULP: Simply slide the pulp control dial left to right to choose how much pulp you want in your juice..
- TAKE-TO-TABLE DETACHABLE PITCHER: Serve juice right at the table in the same pitcher you made it in..
- EASY TO CLEAN: Dishwasher safe parts, including the pitcher, lid, reamers and pulp control basket, make cleanup a cinch. Nested storage keeps kitchen cabinets orderly..
- ONE YEAR LIMITED WARRANTY: We stand behind our testing. This juicer includes a product warranty and access to US-based support..
Check StockChef'n 2-in-1 Juicester Jr. Citrus Juicer
- This citrus juicer features two different sized reamers that work great with lemons and limes. Built-in teeth strain out seeds and pulp while pouring, ensuring pure, clean, citrus juice..
- Both reamers snap onto the juicer for easy transport and convenient storage while the non-slip grip on the bottom of the juicer prevents countertop sliding during juicing..
- Perfect for kitchen or bar use, the clear bowl on the bottom catches juice and measures juice at the same time. The cup holds up to 1/4-cup of juice and has clearly marked measurements of both 2 and 4 tablespoons, 1 and 2 ounces, and markings up to 60 millimeters..
- Great for cooking, making dressings, or cocktails, this juicer simplifies and speeds up the process of extracting delicious citrus juice..
Check Stock