Top Broadcasting Redundancy

Certified Entry-Level Python Programmer (PCEP) - Practice Exams

  • Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and RSTP/STP for network redundancy.
  • IGMP Snooping, QoS, IEEE 802.1Q VLAN, and port-based VLAN supported.
  • Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01.
  • PROFINET or EtherNet/IP enabled by default (PN or EIP models).
  • Supports MXstudio for easy, visualized industrial network management.
Check Stock

Pyle-Pro PDWM2550 19'' Rack Mount Dual VHF Wireless Rechargeable Handheld Microphone System

  • Professional VHF 2 Channel Wireless System - 2 Handheld Microphones Included - Dual Telescoping Receiver Antennas - Dual Volume Controls with Digital Readout - Dual Charging System - 1/4'' Individual line outputs & Mixed 1/4'' Outputs.
  • On/Off Broadcasting Switch - Dynamic Range: 100dB.
  • Signal to Noise Ratio: 105dB - Receiver Power Supply: AC 110/240V - Microphone Power Source: 8. 4 Volt Rechargeable.
  • Receiver Dimensions: 1. 8'' X 18. 9'' X 1. 3'' - Microphone Dimensions: 9. 6'' X . 7" X 0. 5''.
  • Professional VHF 2 Channel Wireless System - 2 Handheld Microphones Included - Dual Telescoping Receiver Antennas.
  • Dual Volume Controls with Digital Readout - Dual Charging System - 1/4" Individual line outputs & Mixed 1/4" Outputs.
  • Frequency Response: 40Hz~18 kHz - Operation Range: 50-180 Meters.
  • Signal to Noise Ratio: 105dB - Receiver Power Supply: AC 110/240V - Microphone Power Source: 8.4 Volt Rechargeable.
  • On/Off Broadcasting Switch - Carrier Frequency: 210-270Mhz - Dynamic Range: 100dB.
Check Stock

Pertronix 808321 Flame-Thrower Blue 8mm 8 Cylinder Spark Plug Wire

  • Two current paths for reliability and redundancy -Primary path: Spiral wound stainless steel alloy -Secondary path: Carbon impregnated fiberglass center core.
  • 8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
  • EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
  • Fiberglass reinforcing braid for added strength and flexibility.
Check Stock

Pertronix 804414 Flame-Thrower Red 8mm 4 Cylinder Spark Plug Wire

  • Two current paths for reliability and redundancy -Primary path: Spiral wound stainless steel alloy -Secondary path: Carbon impregnated fiberglass center core.
  • 8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
  • EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
  • Fiberglass reinforcing braid for added strength and flexibility.
Check Stock

Pertronix 808415 Flame-Thrower Red 8mm 8 Cylinder Spark Plug Wire

  • Two current paths for reliability and redundancy -Primary path: Spiral wound stainless steel alloy -Secondary path: Carbon impregnated fiberglass center core.
  • 8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
  • EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
  • Fiberglass reinforcing braid for added strength and flexibility.
Check Stock

Pertronix 804310 Flame-Thrower Blue 8mm 4 Cylinder Spark Plug Wire

  • Two current paths for reliability and redundancy -Primary path: Spiral wound stainless steel alloy -Secondary path: Carbon impregnated fiberglass center core.
  • 8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
  • EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
  • Fiberglass reinforcing braid for added strength and flexibility.
Check Stock

Pertronix 804412 Flame-Thrower Red 8mm 4 Cylinder Spark Plug Wire

  • Two current paths for reliability and redundancy -Primary path: Spiral wound stainless steel alloy -Secondary path: Carbon impregnated fiberglass center core.
  • 8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
  • EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
  • Fiberglass reinforcing braid for added strength and flexibility.
Check Stock

Pertronix 804206 Flame-Thrower Black 8mm 4 Cylinder Spark Plug Wire

  • Two current paths for reliability and redundancy -Primary path: Spiral wound stainless steel alloy -Secondary path: Carbon impregnated fiberglass center core.
  • 8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
  • EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
  • Fiberglass reinforcing braid for added strength and flexibility.
Check Stock

Pertronix 808215 Flame-Thrower Black 8mm 8 Cylinder Spark Plug Wire

  • Two current paths for reliability and redundancy -Primary path: Spiral wound stainless steel alloy -Secondary path: Carbon impregnated fiberglass center core.
  • 8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
  • EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
  • Fiberglass reinforcing braid for added strength and flexibility.
Check Stock

Pertronix 804207 Flame-Thrower Black 8mm 4 Cylinder Spark Plug Wire

  • Two current paths for reliability and redundancy -Primary path: Spiral wound stainless steel alloy -Secondary path: Carbon impregnated fiberglass center core.
  • 8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
  • EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
  • Fiberglass reinforcing braid for added strength and flexibility.
Check Stock

Pertronix 808220 Flame-Thrower Black 8mm 8 Cylinder Spark Plug Wire

  • Two current paths for reliability and redundancy -Primary path: Spiral wound stainless steel alloy -Secondary path: Carbon impregnated fiberglass center core.
  • 8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
  • EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
  • Fiberglass reinforcing braid for added strength and flexibility.
Check Stock

MOXA NPort 6650-16 - 16 Ports Rackmount RS-232/422/485 Secure Device Server 100V~240VAC Input

  • Nonstandard baudrates supported with high precision.
  • Port buffers for storing serial data when the Ethernet is offline.
  • Supports IPv6 / Ethernet redundancy (STP/RSTP/Turbo Ring) with network module.
  • Modular design for scalability / DES/3DES/AES for highly secure data transmissions.
Check Stock