Top Bronze Welding Rods

100PCS Aluminum Welding Rods Low Temp Easy Melt Aluminum Welding Wire Flux Core-Only Wuitable for Welding Aluminium (0.16 x 33cm/0.06 x 13in)

  • 【NO SOLDER POWDER NEEDED】The aluminum welding rods are flux cored welding rods,so there is no need to use other flux powder..
  • 【HIGH QUALITY MATERIAL】The aluminum welding rods with flux are made of aluminum material, nontoxic, odorless and durable material..
  • 【PERFECT WELDING EFFECT】The aluminum welding wire for propane torch are designed with full & smooth welding effect because the item comes with internal powder, great weldability and corrosion resistance, high thermal conductivity, high electric conductivity and excellent processing performance..
  • 【NOTES】The solution welding flux-core rods are only suitable for argon arc welding or surfacing welding aluminum, aluminum alloy, aluminum-magnesium alloy and other white metals with high strength, good for geability & good corrosion resistance..
  • 【WARRANTY 】If you have any problems with it or questions, please contact us and we will respond in time. We're standing by to assist you all the time. Your satisfaction is our first priority..
Check Stock

21 Rods Aluminum Brazing Rod Low Temperature, Aluminum Welding Rods for Propane Torch, Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair, 1/16\ X 16.93\ (1.6 mm)

  • MATERIAL: 21 Rods 1/16" x 16.93" aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
  • ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
  • APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you ....
Check Stock

SÜA - RBCuZn-C - Low-Fuming Bronze Brazing Rod - Flux Coated - 18 x 1/16 - 1/2 Lb - 24 Rods

  • LFBF (Fluxcoated low fuming bronze) is a general purpose oxyacetylene/brazing rod used for joining various ferrous and non-ferrous metals such as....
  • A “must have” filler metal for every machine shop, LFBF is excellent for building up wearing surfaces or large areas where successive layers must....
  • READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound***.
  • Available in different sizes: 1/16", 3/32"and 1/8". Rod Length: 18" for easier maneuverability while welding since flux coated rods cannot be bend.....
  • Available in different package weights: 1/2 Lb, 1 Lb, 2 Lb and 5 Lb - Choose rod diameter and package quantity from the menu..
Check Stock

Fox Alloy 20pcs Copper Brazing Rods BCuP-2 (5/64\) 2mm Phosphor Round Self Fluxing Copper Welding Rods Sticks TIG Arc Pipes for Air Conditioner Refrigerators

  • Material: The package includes 20PCS 2.0mm cooper brazing rods BCuP-2 brass welding rod.
  • Standard: The copper welding rods kit conforms to AWS A5.8.
  • Advantage: The low temperature phosphor copper welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 640-770℃, good fluidity during welding, molten metal can flow to small gaps.
  • Application：The stick TIG welding rods is used for brazing of copper & copper alloy in motors, air-conditioners, meters, and refrigeration industry.
  • Service: Fox Alloy Time-proven formulation.
  • A team of experienced welding engineers ready to answer all your welding questions..
Check Stock

HITBOX 200A ARC Welder Alkaline Electrode Weldable, 110V 220V 2 IN 1 Lift TIG/MMA VRD Continuous Welding Machine Fits Below 1/8' 4.0 mm Welding Rods,Hot Start Welder for Outdoor Home Industry Use

  • ...y steel, mild steel, and zinc plated pipes. With lift tig capability, our MMA-200 can weld these materials as well as stainless steel. Most electric welders display a current of 200 A, but the actual current may be only about 100 to 140 A. The current of this product can reach up to 200A, and it can handle alkaline welding rods! !!.
  • Weld more types of rods-As you know, it is difficult to weld 7018 and cellulose rods with an arc welder with low no-load voltage. To meet the needs of our customers who weld these rods, we increase the no-load voltage of this welder to 78V. Now you can weld other common rods such as 7018 cellulose rods and 6013J422. You can weld 2.5mm 3.2mm rods for a long time, drag solder or weld 1/8" 4.0mm rods for 1-2 hours.
  • 110V 220V Dual Voltage Arc Welder-This welding machine is 110V 220V and comes with a 35-50mm² quick connector, which can withstand higher current than other connectors. This feature allows the welder to work longer.Because of the high current, extending the weld cable to 50 meters does not attenuate the current..
  • 60% duty cycle, longevity-The rated duty cycle of HITBOX MMA200 is 85% for arc welding and 50% for TIG welding. Automatic compensation for voltage fluctuation, over current protection, over load protection,....
Check Stock

30 Pieces Copper Aluminum Welding Rods 0.08 x 10 Inch Universal Low Temperature Welding Cored Wire Multipurpose Copper Aluminum Repair Rods for Welding Alloy, Stainless, Galvanized Steel, Copper

  • Enough quantity: you will get 30 pieces of universal copper aluminum welding rods in total, enough quantity can satisfy your different needs in daily life and work.
  • Multiple use: the low temperature welding cored wires can be widely applied in electric power, chemistry, food using and so on, practical repair rods for argon arc welding and filling material for aluminum, stainless, galvanized steel, galvanized cast iron, copper with high strength.
  • No need solder powder: the multipurpose copper aluminum welding wires are practical and convenient to use, they come with internal powder and the melting point is 380 - 400 ℃, low temperature and no need to use other flux powder as the welding core and coating as salt base.
  • Nice performance: designed with powder cores, the copper aluminum welding rods have nice forgeability, conductivity and corrosion resistance, which can provide you with smooth welding effect, suitable for home and professional maintain work.
  • Size information: the universal low temperature welding core wires are approx. 2 mm/ 0.08 inches in diameter and 25 cm/ 10 inches....
Check Stock

10 Rods Copper Brazing Rod 15.7 Low Temperature Welding Rod Welding Consumables with Good Liquidity for Welding Refrigerator Air Conditioner Copper Pipes Copper Products

  • MATERIAL: 10 Rods copper brazing rods 15.7” are included in the package. The chemical composition of the brazing rods: Phosphor (P): 7%, Copper (Cu): the remainder..
  • ADVANTAGES: Brazing temperature range: 1310°F-1490°F. Solidus: 1310°F, Liquidus: 1490°F. Tensile Strength ( RM): 838 MPa. The PhosCopper brazing rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can also be opened for easy storage and use..
  • APPLICATION: High-quality copper brazing rod are used for the welding of refrigerator copper pipes, air conditioner copper pipes and copper water pipe, as well as for the electromechanical industry..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you better..
Check Stock

Aluminum Welding Rods 100 Pack Aluminum Weld Bars 1.6mmx33cm Aluminum Welding Wire for Electric Power Chemistry

  • HIGH QUALITY MATERIAL-- This low temperature aluminum welding rods are made of premium nontoxic, odorless and durable aluminum. The aluminum welding....
  • PERFECT WELDING EFFECT -- Designed with full & smooth welding effect, great weldability and corrosion resistance, high thermal conductivity, high....
  • APPLICATION -- The aluminum welding rods is used for propane torch welding and filling material for pure aluminum, connection with aluminum bus and....
  • WIDELY USE -- The aluminum welding wire is widely used for pure aluminum, aluminum manganese, aluminum silicon magnesium alloy, and automotive....
  • WARRANTY -- guangfan provide this product 3-month warranty. If you have any problems with it or questions, please contact us and we will respond in....
Check Stock

30Pcs Copper Brazing Rod Copper Phosphorus Solder Round Selffluxing Brazing Rod Copper Phosphorus Brazing Rod 25cm Copper Welding Rod for Air Conditioner Refrigerators

  • 【Perfect Welding Performance】: Our phosphor copper welding rods are mainly used in the welding field of copper and copper pipe joints of....
  • 【Easy to Use】: Standard processing with 2.5 mm diameter, the low temperature phosphor copper welding rod is easy to install and remove.This coated....
  • 【Self-flux】: Our copper welder rods owns stable performance and durability. In particular, this copper welding rod has good fluidity during....
  • 【Wide Fields of Welding】: Our copper phosphorus solders are commonly used for welding copper tubes of air conditioners and refrigerators, which....
  • 【What You Get】: Our package includes 30 pieces of copper brazing rod in 3/32-Inch diameter, and this package is about 0.66 pound. These 30pcs....
Check Stock

SIMDER MIG Welder 140A Flux Core Welder MIG/Stick 2 in 1 Welding Machine Gasless 110V/220v Dual Voltage IGBT DC Inverter Welder

  • 【Easy Start for Beginner】The Synergic mode on this MIG welder will automatically change the voltage by adjusting the current. Very easy to operate and start for beginners. Advanced IGBT&Inverter make this MIG welder a portable and efficient welding tool..
  • 【Dual Voltage ARC&MIG Welders】This is an ARC&MIG 2 in 1 Welding machine. 140Amp DC 110V/220V Dual Voltage MIG welder. Package includes MIG Torch,Electrode holder,Ground clamp, 110V/220V Adapter and etc..
  • 【Multi-Application MIG Welder】This Wire Feed MIG Welder is suitable for welding iron, carbon, steel and etc. Great choice for household welding, or DIY project on steel..
  • 【APPLICABLE FLUX CORE WIRE & RODS】The wire MIG welder apply for .030"(0.8mm) &. 035" (1.0mm) welding wire. ARC mode fits rods: E7018, E6013, E6011..
  • 【What’s more】SIMDER is a professional welding machine manufacturer, we aim to provide a better welding tool and make welding easier. If you have any questions, feel free to contact us.
Check Stock

150W Plastic Welder,Plastic Welding Kit Car Bumper Repair 800pcs Hot Staples & 56pcs 7 Types of Welding Plastic Welding Rods for Car Bumper Plastic Crack Repair (Red)

  • 【Upgraded 150W Quick Heating】150W high-power plastic welding machine, Fast heating in 1-3 seconds, heating and cooling faster, more efficient and more energy efficient than most 50W, 70W, 100W welding machines on the market. It can save you a lot of time and complete repair projects quickly..
  • 【New Updated Accessories】: Equipped with 800 hot staples and 56 7 kinds of Plastic Welding Rods to meet your different welding needs. Plastic Welding Rods are suitable for different surfaces. Cracked and damaged plastic parts can be welded quickly and easily, putting them back together nicely,saves time and effort, and improves the work efficiency..
  • 【Ideal for Car Repair】: The ideal way to repair the most modern plastic products. It is suitable for the repair and reinforcement of various automotive plastic parts such as bumpers, instrument panels, lamp holders, canoes, kayaks, and plastic daily necessities. Save time and money on routine maintenance..
  • 【What You Get】Includes 1 Plastic Welding Gun, 1 spatula tool, 800PCS hot staple, 56 Plastic Welding Rods, 5 aluminum sheets, 5 wire mesh sheets, 2 sponge sheets, 1 pliers,....
Check Stock

Arc Stick Welder, 115 Volt, 70 Amp (Campbell Hausfeld WS099001AV)

  • Durable metal welder with comfort fit handle for added convenience. Capable of welding 18ga up to 1/8” Material. Recommend using 1/16” and 5/64” welding rods..
  • Dual heat setting that runs great for both small repairs and hobby welding.
  • Runs on standard 115V power and a duty cycle: 20% @ 50A. Weld and ground cable length: 6 feet.
  • Thermal overload protection to prevent overheating, and transformer that provides an easy-starting, smooth arc.
  • Finish your projects faster and easier with Campbell Hausfeld..
  • Arc stick welder powered by 115-volt current.
  • Welds mild or stainless steel from 18-gauge to 1/8 inch.
  • Dual heat setting for use with welding rods.
  • Automatically shuts off at duty cycle rating.
Check Stock