Top Brown Wood 3d Printing Filament

AMOLEN 3D Printer Filament, Ebony Wood PLA Filament 1.75mm, 3D Printing Filament with 20% Real Wood Fiber,1kg

  • REAL WOOD FIBER - There is 20% wood fiber in the ebony wood PLA Filament. Therefore, you will get a print like a real wood with matte face and even wood smell..
  • REFUSE TO CLOGGING - The finely ground wood particles, double filtration, no impurities, make your printing smoother. Good shaping, no bubble, no jamming, no warping, no brittle..
  • HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm..
  • VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage..
  • ONE MONTH WARRANTY - Any problems, please contact us for free replacement or full refund. AMOLEN is committed to devolop high-quality and special filament..
  • Print Speed: 30-60mm/s, 40mm/s will be better.
Check Stock

3D Pen Projects for Beginners: 4D An Augmented Reading Experience (Junior Makers 4D)

  • ...toxic and non-irritating, Stronger and harder to break. The melt temperature of PLA is only 60 °C, eliminating the risk of burning hands. We also provide 2 finger cap protectors for your fingers..
  • 【Easy to Print & Wide Compatibility With 3D-Pen 】: Our 3D Pen filament refills are universally designed, for smooth printing, individually Vacuum-sealed, tight tolerances, Eco-Friendly & compatible with most of 3D Pen and printers in the market. 3D Pen pla filaments can also be printed throughput at higher speeds, such as support for Anycubic 3D printer, mynt3d or Scrib3d 3D pens. The low printing temperature allows fast molding without cracking or bubbling to the model..
Check Stock

SW. ACCESSOIRE 2pcs New Version for E3D-V6 Heating Block Compatible for PT100 Sensor for e3d v6 Heated Blocks 3D Printer Parts

  • 3D Pens Abs Filament Accessories 3D Pen Filament Refills 3D Printer Resin Printer Portable Printer Mini 3D Printer 3D Filament 3D Printer Accessories Power Supply Painting Kit Tool Pouch Spatula Set Essentials.
  • 3D Printers 3D Filament 3D Printer Filament Deburring Tool Tool Bag Knife Kit Impresora 3D 3Dpen For Kids Scribble Pen 1.75 Filament Home Printer Cnc Router Machine Model Kit Aluminum Tape Resin Printer 3D Drawing Pen.
  • Crafty Touch 3D Printing Pen Paint Kit 3D Pen Impresora 3D 1.75 Filament Magnetic Tool Pad Touch Screen Screen Printer 3D Printer Accessories 3D Pen For Kids 3D Pens Model Kit Drill Kit Electronics For Teens Tool Bag Cnc Machine.
  • Scribble Pen 3D Pens For Kids And Adults Metal Bed Power Pro Paint Palette 3D Pens For Kids Screen Printer Palette Knife 3D Printer Resin 3D Pen Essential Pen Set 3D Pen For Adults 3Dpen For Kids 3D Printing Pen For Kids.
  • 3D Filament Crafty Touch 3D Printing Pen 3D Printer Accessories Cnc Machine Tool Kit Tool Pouch Tool Set With Drill Tool Set Interesting Gifts 3D Printing Pen With Usb 3D Pen For Kids Scribble Pen 3D Pen For Adults Printer Cable.
Check Stock

SUNLU Filament Dryer, FilaDryer S1 Filament Dry Box, Compatible with 99% of 1KG PLA PETG ABS TPU 3D Printer Filaments, Dehydrator Storage Box, Filament Spool Holder, Black

  • 【Say Goodbye to Poor 3D Printing by Wet Filament】Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. SUNLU FDM 3D Filament Dryer Enclosure can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments..
  • 【Personalized Temperature Setting】The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors. Adjustable temperature range 35℃~55℃. Suitable for more than 20 kinds of 3d printing filament commonly used in the market.
  • 【Personalized Drying Time Setting】 The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time. The time setting range is 0~24 hours. Commonly used 3D filament on the market under normal circumstances only need 3-6 hours of drying to achieve a good printing experience and printing effect..
  • 【Compatible with 99% of 3D Filament Spools】A: Maximum capacity of SUNLU dry box is Φ210*85(H)mm. B: Compatible with all the mainstream 3D filament brands SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC etc..
  • C: Works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm..
Check Stock

3D Pen Filament 320 Feet, 16 Colors，Each Color 20 Feet, Bonus 250 Stencils eBooks - 3D Printing Pen PLA Filament 1.75mm, High-Precision Diameter and Kids Safe Refill

  • 【Say Goodbye to Poor 3D Printing by Wet Filament】Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. SUNLU FDM 3D Filament Dryer Enclosure can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments..
  • 【Personalized Temperature Setting】The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors. Adjustable temperature range 35℃~55℃. Suitable for more than 20 kinds of 3d printing filament commonly used in the market.
  • 【Personalized Drying Time Setting】 The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time. The time setting range is 0~24 hours. Commonly used 3D filament on the market under normal circumstances only need 3-6 hours of drying to achieve a good printing experience and printing effect..
  • 【Compatible with 99% of 3D Filament Spools】A: Maximum capacity of SUNLU dry box is Φ210*85(H)mm. B: Compatible with all the mainstream 3D filament brands SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC etc..
  • C: Works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm..
Check Stock

24 Colors 1.75mm ABS 3D Pen Printer Filament Refill, Each Color 3.5m, Total 84m ABS Material, Support for MYNT3D / SCRIB3D 3D Printing Pen, Not Fit for 3Doodler Pen, Pack with 2 Finger Caps by MIKA3D

  • 24 Most Popular Solid Colors List:White, Black, Light Grey, Dark Grey, Brown, Amy Green, Red, Orange, Light Orange, Light Yellow, Pink, Light Purple, Ivory, Cyan, Light Blue, Purple, Sapphire Blue, Dark Blue, Dark Purple, Rose Red, Green, Lime Green, Yellow, Dark Red.
  • Great Colors Sample Pack: 24 Beautiful Colors will Satisfy You Much Better and More, These Various Colors is Great Choice To Print Many Different Colors as You Like, Perfectly For ABS Sample Color Testing, Great Suitable for 3D Pen Drawing Arts, Crafts, DIY, It's Great Gift for 3D Create and 3D Doodling Fun.
  • High Quality: All of our ABS Filament Made from 100% New Raw Material, The Filament Diameter is More Consistent, Easy to Print, ABS is Much Stronger than PLA Filament, Widely Support for 3D Printer and 3D Pen, This ABS Refill Assortment with 94.5m Material, Total 310 Feet Pack Together.
  • Strong Compatibility: Widely Support for All 3D Pen and 3D Printer which Use 1.75mm ABS Filament, For Example: Support For MYNT3D 3D Drawing Pen, Support For SCRIB3D 3D Printing Pen, While Not Fit for 3Doodler Pen.
  • Extra Gift: 2 Silicone Finger Caps, To Protect Your Fingers During 3D Drawing or 3D Printing, It Support You to Make 3D Printing Much More Smoothly and Easily, It's a Great Start Kit.
Check Stock

SUNLU 250g PLA Filament 1.75mm Bundle, 3D Printer Filament, Dimensional Accuracy +/- 0.02 mm, 0.25 kg Spool, 8 Rolls,Black+White+Grey+Burly Wood+Purple+Blue Grey+Grass Green+Pure Yellow

  • 【Say Goodbye to Poor 3D Printing by Wet Filament】Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. SUNLU FDM 3D Filament Dryer Enclosure can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments..
  • 【Personalized Temperature Setting】The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors. Adjustable temperature range 35℃~55℃. Suitable for more than 20 kinds of 3d printing filament commonly used in the market.
  • 【Personalized Drying Time Setting】 The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time. The time setting range is 0~24 hours. Commonly used 3D filament on the market under normal circumstances only need 3-6 hours of drying to achieve a good printing experience and printing effect..
  • 【Compatible with 99% of 3D Filament Spools】A: Maximum capacity of SUNLU dry box is Φ210*85(H)mm. B: Compatible with all the mainstream 3D filament brands SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC etc..
  • C: Works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm..
Check Stock

FlashForge HP-00057 Platform Sticker for Creator Pro and Dreamer 6 Pcs Kit Pack of 6

  • Equips with a massive build volume of 280*250*300mm, resume printing feature, and multiple features for steady and quality 3d printing performance,....
  • Ventilative printing or enclosed constant temperature printing for you to choose when printing the different types of filament.Ensures steady and....
  • Guider II prints with various filaments, including PLA, ABS, PVA, HIPS, PETG, TPU, Wood-filled, Electric, Flexible, TPE filament.
  • Bothered by sudden power failure, especially when printing large size model? Guider II resume printing feature helps recover printing from where it....
  • What you get – Flashforge 3d printer Guider II,12 months warranty, lifetime technical assistance and 24 hours professional customer service.
Check Stock

ATARAXIA ART Flexible PLA Filament, PLA 1.75mm, 3D Printer Filament,1kg/2.2lb, Better Than TPU, 89A Shore Hardness, Patent Formula, Compatible Bowden Extruder, with Filament Storage Bag, PLA Sky Blue

  • ... USA imported natural quality organic raw materials derived from starch or corn, to make our 3d printer Flexible pla filament, makes them far superior then tpu filament 1.75mm. Flexible 3d printer pla filament Recommended Extrusion/Nozzle 0.4-0.6mm, Suggested Temperature 190-210C(374-410F), Bed Temp 0-40C(32-104F), Printing Speed 60-90 mm/Sec. Our PLA+ flexible filaments reel graph indicates how much material left in the spool..
Check Stock

LOTMAXX Shark V3 FDM 3D Printer Auto Leveling, 3D Printing/Laser Engraving/Dual-Color Multifunctional 3D Printer Printing Size 9.25x9.25x10.43in & Engraving Size 9.25x9.25in

  • Multifunctional 3D Printer: LOTMAXX Shark V3 is an FDM 3D printer with higher printing accuracy and speed. And it also supports two-color printing and laser engraving. The 1.6 W laser engraving allows you to engrave with a wide variety of materials like bamboo, ceramic tile, wood, leather, paper, etc..
  • Smart & Precise 3D Printer Auto Leveling: LOTMAXX Shark V3 3D Printer equipped with intelligent leveling tools. When using the product for the first time, it is recommended to level it manually before turning on automatic leveling to ensure printing accuracy..
  • Super Fast Cooling & LED Decoration: Structured dual extruder with 3 fans and 3 modes, supporting dual-color printing. Compatible with PLA/PLA+/Ultra filament. The Shark V3 print head is also equipped with led decoration. Not only can light up the darkness but also can fully enjoy the fun of printing..
  • Filament Sensor and Power Off Resume Printing: LOTMAXX Shark V3 features the function of detecting filament runout or breakage/power loss and resume printing after recovery. By accurately recording the printing data at the time of power outage/filament runout or breakage, it helps to avoid the waste of filaments and time caused by accidents..
  • Removable Touch Screen & Nano-coated Glass Plate: The TFT to....
Check Stock

3D PETG Filament 1.75mm Black 3D Printer Filament 1kg Spool PETG Filament Dimensional Accuracy +/- 0.02 mm PETG Black XVICO

  • 【PETG Filament Printing Tips】 petg 3D filament has the advantages of high purity with low shrinkage and superb layer bonding, Filament 1.75mm meeting your demands for different printing projects. 1.75 petg Filament 100% made of environment-friendly natural materials, harmless to users and the environment.petg Filament Recommended Extrusion/Nozzle Temperature 230°C – 240°C, Bed 70°C – 80°C..
  • 【petg filament 1.75mm Clog-free & Bubble-Free】3D Printer Filament approximately 2.2 LBS 1 KG Spools.petg filament Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing. Since the petg filament is prone to moisture, please store it into a re-sealable aluminum foil bag after unsealing to maintain excellent printing performance..
  • 【PETG Filament Less-tangle & Wide Compatibility】3D Petg Filament Full mechanical winding and strict manual examination, which guarantee the Petg filaments tidy and easy to be fed.The 1.75mm filament You don’t have to worry that it will be incompatible with your 3D printer — 1.75 mm in diameter, dimensional accuracy +/- 0.02 mm. It works perfectly with most FDM 3d printers on the market..
  • 【3D Petg Filament ACCURACY & CONSISTENCY】....
Check Stock

taulman3D Nylon 230 3D Printing Filament Black - 1.75mm (1kg)

  • Nylon 230 3D Printing Filament Prints Easily at 230C, Allowing You to Use It On Any 3D Printer.
  • Nylon Filament for 3D Printing. There Are Some Great Nylons Out There for 3D Printing But Many of Them Cost A Lot. Nylon 230 is the Affordable taulman3D Nylon and The First to Print at 230C.
  • Made in America. The Supply Chain of taulman3D Products is Different Than Your Standard Filament Maker. Every Roll is Manufactured in the US..
  • 1.75mm Diameter Nylon 3D Printing Filament Which Prints Easily at 230C.
  • 1kg Spool. Consistent Diameters Checked by Laser Technology.
Check Stock