Top Bsx Welders Backpack

YESWELDER 8ft 100A for Chicago Electric Welder Complete Replacement Mig Welding Gun Parts Torch Stinger

  • This gun is 8 ft long (Longer than the OEM Gun),and has 2 trigger wires, gas hose, wire liner, and power cable all running up the inside of the....
  • Usually fits welders of around 100A gas shielded welders. (Welding wire diameter: 0.6-0.8mm.).
  • Come with .030" tip in the gun ,and one more .030 and .035 tips in the package.
Check Stock

Enhon Silver Streak Welders Pencil with 12PCS Refills, Mechanical Metal Marker Silver Pen with Built-in Sharpener for Welding, Steel, Pipefitters, Fabrication, Woodworking

  • 【Mechanical Welders Pencil】The mechanical metal marking pencil with built-in sharpener and pocket clip for easy carring and usage. You can press to get a proper advance, easier to use than the traditional wooden silver pencil..
  • 【Illuminate Silver Metal Marker】The silver streak round refills can lay out an illuminate sign on metal and oily surface and maintain its performance in high temperature of welding.
  • Compared with soapstone, the markings of welder pencil is not easily to erase..
  • 【3-Claw Refill Holder】The 3 claw nib design of metal marker can hold the refill tightly and protect refills from breaking, and you can adjust the length of refill very quickly to get a fine point on deep area..
  • 【Wide Application】Welders pencil can be widely applied to make illuminating marks on steel welding, architects designing, sheet metal and steel rob scribing, carving supplies. It is an ideal tool for welders, pipe fitters, building workers and great gift for Fathers' Day..
  • 【Package Includes】1 piece of black welder pencil, 12 pieces of silver 2mm refills. (Warm reminder: please put your finger on the pen tip when you press to get advance refills to avoid all the refills falling out.).
Check Stock

Forney 30681 E7018 AC Welding Rod, 3/32-Inch, 5-Pound

  • All position welding, low hydrogen rod for general purpose AC applications requiring low penetration, can also be used on DC+.
  • Excellent bead contour, light spatter and slag is often self cleaning.
  • Good performance with low open circuit-Voltage OCV power sources.
  • Excellent for tack and skip welds, offers easy re-striking, ideal for out of position welding.
  • Ideal for shops, farms, hobbyist, and DIY welders.
  • Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!.
Check Stock

Lincoln Electric Co Beanie Fr Welding Large

  • HIGH QUALITY COTTON – Made from soft, high thread count cotton and features a stylish stars and stripes fabric pattern..
  • SWEAT ABSORBANT LINER – The inside of the Welders Cap is lined with a soft athletic mesh which absorbs moisture and help prevent hair pulling..
  • FLAT STITCHED SEAMS – To prevent discomfort from seams from pressing / rubbing against the forehead, the welders cap is flat stitched to improve comfort and increasing durability..
  • LIGHTWEIGHT & BREATHABLE - The 100% cotton material is breathable by design. This allows consistent airflow to keep you cool for all day use..
  • ELASTIC FIT – This headwear features an air cushioned elastic band which stretches to fit the users head dimensions..
  • USED BY PROFESSIONALS – This headwear is used by professional fabricators on a daily basis..
Check Stock

iMeshbean® Complete Replacement Mig Welding Gun for Clarke 180EN and 130EN Mig Welders

  • This is a great replacement for Clarke 180EN and 130EN 160EN Mig Welders.
  • This welding gun will handle .023", .030", and .035" steel, stainless steel, and flux cored wires..
  • Length: 10 FT,There is a gas valve in the handle, so this gun can be used with or without gas..
  • The gas hose extends 6 ft beyond the end of the gun, the trigger wires have the correct connector for the 130EN and 180EN welders, and the cable which carries the welding current extends 20" past the end of the gun..
Check Stock

Eastwood Mig 175 Spool Gun Metal Connector Plastic Plug Push Pull Feeder Aluminum Welding Torch Gun 1 Lb Spool Of .035 Aluminum Wire

  • Spool Gun With Metal Plug Fits The Eastwood Mig135, Mig175, Mig250, And Mp250I Welders.
  • Comes Complete With A 1 Lbs Spool Of .035" Inch Aluminum Wire.
  • For Use On Machines With A Metal Plug On The Machine And Torch Lead..
  • Designed, Engineered And Tested To Eastwood Specifications.
  • Fits The Eastwood Mig175, Mig135 And Mig250 Welders.
Check Stock

Miller 129527 Conn,Tw Lk Insul Male(Dinse Type)50 Series

  • Premium quality Dinse-style insulated cable connector pair (male/female) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
  • Insulated Dinse-type male connector is with .355" diameter pin (25-mm) and 1/2" diameter pin (35-50mm, 50-70mm and 70-95mm)..
  • Compatible with Dinse-type twistlock connectors in mainstream welders ( Miller, Lincoln, ESAB, etc.). Available connector sizes 16-25mm (small 0.355" pin, #4-#3), 35-50mm (1/2" pin, #2-1/0), 50-70mm (1/2" pin, 2/0-3/0) and 70-95mm (1/2" pin, 3/0-4/0)..
  • All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

iMeshbean® Replacement Mig Welding Gun Stinger Torch Lead for Clarke 130EN 160EN 180EN Welder Parts 10 FT

  • This is a great replacement for Clarke 180EN and 130EN 160EN Mig Welders.
  • This welding gun will handle .023", .030", and .035" steel, stainless steel, and flux cored wires..
  • Length: 10 FT,There is a gas valve in the handle, so this gun can be used with or without gas..
  • The gas hose extends 6 ft beyond the end of the gun, the trigger wires have the correct connector for the 130EN and 180EN welders, and the cable which carries the welding current extends 20" past the end of the gun..
Check Stock

Arrow Welding Magnets Set Arc Tig Mig Welding Magnetic Arrow Holder Multi-angle Metal Working Tools and Equipment Welding Accessories For Soldering Welding Assembly Installation (4PCS-9LBS)

  • 【High Gloss Enamel End Plates】Constructed of high quality stainless steel with a powder coated finish,these welders are anti-rust,corrosion-resistant and long lasting!High gloss enamel end plates are solidly riveted together for the strongest performance and won’t melt while welding!The red coating not only protect from rusting and from scratching the materials that you are working with,but also help you locate it easily,make your welding job more efficiently and precisely!.
  • 【Powerful Welding Magnet】Each package comes with 4 pieces heavy duty powerful angle magnets:can hold and support any ferrous metal objects up to 9 lbs!They provide strong magnetic pull strength for extreme sturdiness that is needed for welding,soldering,can be stuck solidly to any metal object while leaving your hands free to work more efficiently!Perfect gift for square and round tube welders,iron workers,professional welders,metal fabricators,art welders!.
  • 【Most Popular Uses of Angle Degree】Each magnetic welding holder is designed with an arrow shape which allows the magnet to align itself with the tubing in a self-centering fashion,and provides the most popular uses of angle degree:45,90,and 135-degree,allows you to work with different angles while welding,solderin....
Check Stock

WeldingCity 5-pk Gas Nozzle 169-715 169715 1/2

  • Premium gas nozzles (2-pk and 5-pk) for MIG welding gun in Miller Millermatic/MIGmatic and Hobart welders..
  • Gas nozzle 169715 (1/2" orifice, flush tip) for use with MIG welding gun M-10/M-15 (M-100/M-150) in Millermatic 135, 140, 175, 180, 210, 211, Passport and Passport Plus. Also replacement for gas nozzle 770-404 for some Hobart MIG welding guns such as H-9/H-10..
  • Gas nozzle 16972X and 200258 for use with MIG welding gun 150A - 400A M-25/M-40 series in Millermatic welders. 1/2" and 5/8" orifice.
  • tip-nozzle relationship recessed/flush/stick-out as per illustrated nozzle length for various part numbers..
  • Refer to your MIG welding gun user manual for selection of correct gas nozzle. Package of 2-pk and 5-pk. Volume discount available. Buy More Save More!.
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Tool Parts 25mm Diameter Wire Feed Drive Roller Roll Wheel .030'-.035' For Mig Welders For Clarke, SIP, MIG100/130/160/180/200

  • Package Includes: 1*Wire Feed Drive Roller | Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. |.
  • 25mm Diameter Wire Feed Drive Roller Roll Wheel .030"-.035" for Mig Welders.
  • Fits for many standard build MIG welders such as for Clarke, SIP, MIG100/130/160/180/200 etc..
  • Welder wire feed drive roller roll parts 0.8-0.9 Knurled-Groove .030"-.035".
Check Stock

Jackson Safety BH3 Auto Darkening Filter Welding Helmet with Balder Technology, Black, Universal Size, 46157

  • Design: Jackson Safety BH3 Auto darkening filter lens (ADF) offers best optical clarity, diffusion of light and angular dependence with a true 1/1/1/1 rating (DIN rating EN379).
  • Clean View: Variable shades from 9 to 13 to shield and protect eyes from radiant energy during weld.
  • This helmet has shade, sensitivity and delay adjustments for different tasks, enabling welders to enjoy enhanced visibility.
  • Features: This Jackson Safety Welding helmet is compatible with magnification filters and hard hats (sold separately) and includes 3 headgear adjustments for the ability to suit a variety of welders and tasks.
  • Certified: Meets ANSI/ISEA Z87.1+ standard for high mass impact protection and welding use, and DIN Plus requirements for production quality.
Check Stock