Top Bumper Hitch Covers

CURT 19100 Camper RV Bumper Hitch, Fits 4-Inch Beam, 2-In Receiver, 3,500 lbs

  • DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing.
  • RUST, CHIP, UV-RESISTANT. This camper bumper hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The finishes are co-cured for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 4-inch x 4-inch RV bumper with the included hardware and typically just a few tools.
Check Stock

SuperATV Rear Receiver Hitch for 2017+ Polaris RZR XP Turbo l 2017+ Polaris RZR XP 4 Turbo l Red l 1,500 lb Max Towing Capacity l Made of 3/16' Heavy-Duty Steel

  • 【Fits】2017+ Polaris RZR XP Turbo l 2017+ Polaris RZR XP 4 Turbo l NOTE: Not compatible with Polaris Factory Rear Bumper or a SuperATV Rear Bumper.
  • 【Make Work Easy】SuperATV’s 2” Red Receiver Hitch for the Polaris RZR XP Turbo is made with 3/16” heavy-duty steel plating and hand welded for superior strength. It’s finished with a UV resistant powder coating for years of hard use. When you’re ready to get real work done, get a SuperATV Receiver Hitch..
  • 【Versatile】This RZR hitch uses a standard 2-inch by 2-inch receiver, so you can install more than just ball mounts. You can do more on your off-road adventure with a bike rack or gun rack. Put the utility back into UTV with a tow hook or cargo rack. Our receiver hitch makes it possible..
Check Stock

WEISHUJI RC Rear Bumper, RC Metal Rear Bumper, Metal Rear Bumper with 2 Shackles/Trailer Hitch, Metal Rear Bumper with D-Rings Fit for TRX4 1/10th RC Crawler Car

  • RC Rear Bumper is suitable for TRX4 1/10th RC Crawler Car..
  • RC Rear Bumper is good for protecting your chassis when you flip over as the bumper is pointed outwards..
  • RC Rear Bumper is made from high quality materials and Metal Rear Bumper with 2 Shackles/Trailer Hitch are designed for long-lasting performance..
  • RC Rear Bumper is good in durability and corrosion resistance, Metal Rear Bumper with D-Rings Fit presents great looks..
  • Package of RC Rear Bumper includes: 1X RC Metal Rear Bumper 2X Red Shackles 1X Trailer Hitch.
Check Stock

Ohuhu Bolt-on RV Bumper Hitch Receiver Adapter Fits 4-4.5" Beam, 2" Receiver with Hitch Pin & Hitch Cover

  • Quick, Easy Installation: No need for complicated welding to make the Ohuhu Hitch Receiver work. You can hook it up to a bicycle rack, RV tire rack, cargo rack or other accessories. Simply install it on the bumper and you are good to go..
  • Sturdy & Durable: Hold it together, for the long term! Sturdy carbon steel construction is a durable, corrosion-resistant and long-lasting solution to all your trailer needs. You can trust in the Ohuhu Trailer Receiver to do its job every time..
  • Use Only For 2"*2" Square Tubes: : Designed specifically for 4"-4.5" bumpers, this receiver is made for use with 2"*2" square tubes. Ensure that there is at least 1" of space between the bumper and trailer before installation..
  • 200lbs Tongue Weight Capacity: The Ohuhu Camper Bumper Hitch has a 200lbs tongue weight capacity that you can rely on (Note: It is NOT intended for towing purposes)..
  • Accessories Included: Also included with your purchase are a set of 5/8" hitch pins and 1 rubber cap. Use the pins to secure the rack once installed on the hitch receiver to ....
Check Stock

Style In Print Custom Trailer Hitch Cover Custom Personalized Text 2 Inches Truck Receiver Hitch Cover

  • PREMIUM QUALITY: Give your vehicle a new look and more personality with our high quality 100% plastic tow hitch covers RV accessories exterior (white plaque made of aluminum). Plastic is better than metal since it will not rust!.
  • FITS 2" STANDARD RECEIVER: Our truck hitch covers fits every 2 inches square receiver..
  • TREATED UV & WATER RESISTANT: Our hitch accessories are specially treated against UV and water so you can be sure that they will not rust or fade. This RV hitch cover will resist the sun, mud, rain and snow..
  • 2 HOLES PRE-DRILLED: Our towing hitch insert is really easy to install. Simply slide our hitch cover into your receiver. Secure to the hitch cover with a hitch pin (NOT INCLUDED)..
  • CUSTOM HITCH COVERS WITH TEXT: Have fun and let your imagination take over! Add the text of your choice and select among various fonts and colors to make your personalized hitch cover with text unique!.
Check Stock

Samman Hitch Step with Red Brake Light, Towing Hitch Step for 2'' Standard Receiver Heavy Duty Metal Construction Hitch Mount Compatible with Jeep Chevrolet Ford Toyota GMC Dodge RAM

  • ?Universal fits for 2 inch Receivers:?Hitch step is customized for standard 2in receiver, compatible with Chevy, Ford, Toyota, GMC, Dodge RAM, Jeep.
  • ?Sturdy and Protects:?Sammanlight hitch step is crafted from sturdy heavy duty metal with black powder coat finish, which is protect the hitch mount from rust and corrosive. It makes a nice addition to your vehicle, adding a little something to the overall appearance of your vehicle, also prevent your bumper from damaging when someone parking behind your vehicle.
  • ?Non-slip Plastic Cover:?Truck hitch step with plastic cover, providing non-slip support.
  • ?Extra Safety on the Road?With 6W, 480LMs LED stop red light on back of the hitch bumper, it for an extra security keeping the drivers behind you little more alert (Red wire for positive, Black wire for Negative).
  • ?Easy Installation:?plug-and-play, simply take it out of the box and slide it right into your 2 inch receiver on your hitch. (NOTE: package not including the hitch pin).
  • Compatible with vehicle type: Compatible with Truck, Pickup, SUV, Chevrolet, Ford, Toyota, GMC, Dodge RAM, Jeep with 2 inch Receivers.
Check Stock

Bully BBS-1104L Black Bull Series Steel Universal Fit Truck LED Brake Light Hitch Step Fits 1.25 and 2 Hitch Receivers for Trucks from Chevy Chevrolet Ford Toyota GMC Dodge RAM Jeep

  • It Is Widely Used To Gain Easy Access To The Truck Bed, Luggage Racks, Or Rear Cargo Area Of A Vehicle. Hitch Steps Double-Up As Bumper Guards And Can Protect Against Damage From Low Impact Rear-End Collisions.
  • Durable Construction: The Sturdy Hitch Step Is Manufactured Using 16-Gauge Steel To Withstand Extreme Compressions. The Non-Slip, High-Impact Rubber Step Pad Adds To The Overall Strength Of The Access Step.
  • Easy Installation: Use Of A Plug-And-Play Helps With Quick, Effortless Installation. Once Installed, The Rubber Pad Of The Multi-Purpose Utility Step Ensures Users Get A Secure, Comfortable Footing At All Times.
  • Universal Fit: The Utility Bumper Guard Is Designed To Fit Standard 2In. Hitch Mounts. This Bumper Guard Is Suitable To For Most Common-Sized Hitch Receivers.
Check Stock

TOEASYTY Heavy American Flag Metal Trailer Hitch Cover for 2 Inch Receivers,Tow Hitch Covers 2 Inch for Truck Accessories with 5/8-inch Pin Diameter Trailer Hitch Lock

  • Heavy Metal - The panel of this American flag hitch cover is made up of two layers of heavy metal for more strength and stability. The upper layer is hollowed out to add a 3D stereoscopic visual effect, making it more distinctive..
  • Hitch Cover - The tow hitch cover is made of high-quality stainless steel with a plated and coated surface of the trailer hitch covers. It protects the hitch receiver tube from mud, snow and debris, and pedestrian scrapes while increasing its durability for outdoor use..
  • Hitch Lock - It is made of strong hardened steel and comes with 2 exclusive keys, making it very stable and anti-theft when using the tow hitch covers and pulling loads..
  • Fits 2-inch Receivers - This trailer hitch cover fits all standard 2-inch hitch receivers such as pickups, SUVs, cars, and truck accessories. Protects the receiver while adding beauty to the rear of the vehicle..
  • Easy Installation - Hitch covers 2 inch can be quickly installed and removed at the receiver. Hitch cover with extra gasket, hitch lock with O-ring to prevent friction and impact, extending the life of the receiver and hitch cover..
Check Stock

Bully BBS-1104L Black Bull Series Steel Universal Fit Truck LED Brake Light Hitch Step Fits 1.25" and 2" Hitch Receivers for Trucks from Chevy (Chevrolet), Ford, Toyota, GMC, Dodge RAM, Jeep

  • Bump Step: It Is Widely Used To Gain Easy Access To The Truck Bed, Luggage Racks, Or Rear Cargo Area Of A Vehicle. Hitch Steps Double-Up As Bumper Guards And Can Protect Against Damage From Low Impact Rear-End Collisions.
  • Durable Construction: The Sturdy Hitch Step Is Manufactured Using 16-Gauge Steel To Withstand Extreme Compressions. The Non-Slip, High-Impact Rubber Step Pad Adds To The Overall Strength Of The Access Step.
  • Easy Installation: Use Of A Plug-And-Play Wire Harness Helps With Quick, Effortless Installation. Once Installed, The Rubber Pad Of The Multi-Purpose Utility Step Ensures Users Get A Secure, Comfortable Footing At All Times.
  • Universal Fit: The Utility Bumper Guard Is Designed To Fit Standard 2In. And 1 ¼ In. Hitch Mounts. This Bumper Guard Is Suitable To For Most Common-Sized Hitch Receivers.
Check Stock

CURT 45796 18-Inch Long Trailer Hitch Extension for 2-Inch Receiver, 3,500 lbs , Black

  • ADDED CLEARANCE. This trailer hitch extension adds 18 inches of extra length to your hitch receiver, providing additional clearance between your bumper and hitch accessory or trailer.
  • STANDARD FIT. This receiver hitch extension bar has a 2-inch x 2-inch shank to fit any industry-standard 2-inch trailer hitch receiver.
  • SOLID STRENGTH. This 2-inch receiver hitch extension is constructed from high-strength steel to ensure reliable towing for the road ahead. It is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight.
  • CORROSION-RESISTANT. This heavy-duty receiver hitch extension is finished in a highly durable black powder coat to withstand rain, dirt, UV damage and other corrosive threats.
  • EASY TO INSTALL. Installing this trailer hitch extension is fast and easy. You can use it as needed by simply inserting the shank into your hitch receiver (hitch pin sold separately). Then, hitch up your trailer or hitch accessory.
Check Stock

boslla Trailer Hitch Cover for 2 Receivers Heavy Metal Tow Hitch Cover USA American Flag Hitch Receiver Cover with Gasket and Installation Tools Pins for Trucks Cars Black Hollow-Out

  • Unique Double Layer Hollow Design - This America flag hitch cover is composed of 2 layers and upper hollow design, which increases the 3D stereoscopic vision. The upper layer adopts the edge back folded screw fixing design, which is more strength and stable..
  • Heavy Duty Hitch Covers - Our trailer hitch covers are electro-plated to reinforce the finish and never come off for added durability and corrosion resistance. Made of heavy duty stainless steel alloy, it lasts longer than regular aluminum alloy tow hitch covers..
  • Fits 2" Receivers - The american flag emblem is measured 3x5 inches. The 2 inch interface fits most of the trailer hitch, please measure the size before order. Universal design makes this hitch cap cover can compatible with cars, vehicles, trucks, Jeep, toyota, Ford, etc..
  • Pratical Hitch Cover - The hitch cover for trucks designed by the USA flag is suit for outdoor use, UV and scratch resistant, can withstand harsh weather and conditions. Not only protects the hitch receiver from dirt and debris, but also adds beauty to the rear of your car..
  • Humanized Details - Equipped with gasket and complete installation tools. After a simple installation, 2 inch hitch cover can be closely attached to the tow hitch. The gasket can prevent friction and....
Check Stock

Ohuhu RV Bumper Hitch 2" Receiver Adapter with Hitch Pin & Hitch Cover, Openning 3500 LBS Capacity Fits 4" x 4" Bumper Trailer Towing Cargo Carrier Bike Racks

  • Quick, Easy Installation: No need for complicated welding to make the Ohuhu Hitch Receiver work. You can hook it up to a bicycle rack, RV tire rack, cargo rack or other accessories. Simply install it on the bumper and you are good to go..
  • Sturdy & Durable: Pulls its weight, every time! Tough and durable for the long haul, this hitch receiver is constructed of premium steel. With a dual coating finish of E-coat and Black Powder Coating, this bumper hitch is protected from rust and corrosion. Get the job done right with the Ohuhu Trailer Receiver!.
  • Use Only For 2"*2" Square Tubes: Designed specifically for 4"*4" bumpers, this receiver is made for use with 2"*2" square tubes. It can allow for a wide variety of towing options..
  • 350lbs Tongue Weight Capacity: This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)..
  • Accessories Included: Also included with your purchase are a set of 5/8" hitch pins and 1 rubber cap. Use the pins to secure the rack once installed on the....
Check Stock