Top Bushing Fittings

GTW 6" Double A-Arm Golf Cart Lift Kit for Club Car DS Gas/Electric 1982-2003.5

  • [Easy Installation] Our No Cutting and No Weld Design makes for an easy bolt on application | Easy to Follow FULL COLOR Instructions Included.
  • [Adjustable Camber & Toe] Complete with pivot point grease fittings for easy maintenance.
  • [A Better Ride] The lift kit Increases suspension travel providing a smoother off-road experience | 6 inch Lift Allows up to 23" Tall Tires.
  • [Sleek & Strong] Durable urethane bushing with a high gloss black powder coated finish.
  • [Important Note] Must have Metal Steel Dust Covers on Front Hub to Fit.
  • if cart has plastic dust covers, alternate lift kit is needed.
Check Stock

2-Pack Besosay Brass Reducer Hex Bushing Threaded Pipe Fitting 1 Inch NPT Male x 3/4 Inch NPT Female Adapter

  • ✅ SPECIFICATION - Standard brass pipe fitting 1" NPT male to 3/4" NPT female reducer adapter. For connecting pipes with different ends size..
  • ✅ MATERIAL - This brass reducer bushing adapter is made of high quality brass for corrosion resistance, high temperature ductility and low magnetic....
  • ✅ EASY INSTALLATION - The deep threads design allows the fittings to be better engaged with the object to enhance fixation, and the smooth threads....
  • ✅ OPERATION PRESSURE & TEMPERATURE - Max. Pressure: 150 PSI ,Temperature range：-65 to 250 F..
  • ✅ PLEASE TAKE NOTICE - This pipe fitting can not be installed for potable water use. And, NPT thread size does not actual diameter, it is only....
Check Stock

OEMTOOLS 27212 Manual Bushing Installation and Removal Tool Set, Bushing Removal Tool, Bearing Press Kit, Bushing Tool Kit, Tool Kit Push Pull Bushing

  • EASY TO USE: The bushing puller kit cuts down on frustration and expended energy during difficult wheel bearing, suspension bushing, and seal removal and installation repairs.
  • WIDE RANGE OF USE: The adapter cups with the bearing puller set provide a wide range of options to fit your exact repair needs.
  • The OEM Tools bushing driver set includes 20 different size cups for versatile use.
  • ELIMINATE DAMAGE: The metric bushing driver set reduces the possibility of damaging the bearing/suspension housings.
  • Don’t have to remove components from vehicles with this bushing tools set.
  • ADAPTABLE: The bushing installer kit comes with an adapter to use bushings with shop press.
  • Plates and sleeves can be used in a standard workshop press when on-site access isn’t possible.
  • MORE USES: The bushing tool set works with silent bearings, hydraulic bearings, ball bearings, shaft seals, rubber bearings, and more.
  • Cups with bushing press and pull kit allow for hundreds of combinations.
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets mo....
Check Stock

JKS 2018-2020 Compatible with Jeep Wrangler JL 2020 Gladiator JT Quicker Disconnect Fits 0-2.0' Lift JKS2032

  • Special Notes:Not compatible with aftermarket swaybars, Some vehicles may require extended front brake hoses or other modifications to compensate for additional suspension travel..
  • Fits vehicles with 0-2.0" Lift Only, Includes a pair of frame mounted retention brackets to keep the links and sway bar in place when disconnected, Gain up to 30 percent more axle articulation by disconnecting your front swaybar, Dramatically improve off-road performance on stock or modified Jeeps.
  • Variable length design adapts to your vehicle and future modifications, Convenient grease fittings ensure easy bushing lubrication for smooth, silent operation, Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces.
  • Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability.
  • Costs far less than lockers, tires, lift kits, and other accessories with comparable performance benefits.
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed includes LS1 LS2 LS3 LQ9 LQ4 Rocker Arm Support Pedestal Stands.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts and Pair of Rocker Arm Support Pedestal Stands ..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater sur....
Check Stock

Bushing Fix UP1KIT - Transmission Shift Cable Bushing Repair Kit

  • Kit includes replacement bushing and application specific installation tools..
  • Text and video instructions along with tech support make installation very easy..
  • Used by many transmission and service professionalsDescriptionThe transmission shift cable linkage kit allows you to quickly and easily repair your shift selector cable by replacing the bushing or grommet. The patent pending coupling and custom molded replacement bushing ensure a quality repair with ease. A professional can perform this repair in under 10 minutes, average time for a non-professional is less than 25minutes. This bushing is made from a material that was designed to outlast the factory bushing and includes everything needed to install. The kit includes DIY instructions, custom molded bushing, and patent pending installation tools. Works in 4T40-E, 4T45-E, and 4T65-E transmissions. This kit fits the following vehicles: Chevrolet Uplander.
Check Stock

LIONSCOOL 7ft Olympic Bar for Weightlifting and Power Lifting, 2 Inch Barbell Bar for Squats, Deadlifts, Presses, Rows and Curls, 500LBS Weight Capacity

  • Reliable Olympic Barbell for Beginners: We specially designed an economical home use Olympic weightlifting bar but with quality fittings. And we enhanced the steel hardening process and surface treatment to make our bars stronger for repeated use. The steel used in this 500LBS bar was tested with 100,000 PSI tensile strength, adequate enough for your demands in the early phase. And overall black e-coat finish features a stunning look and great feel..
  • Premium Bearing and Bushing: For those who are tired of tightening the hex bolt end sleeves, LIONSCOOL Olympic Bar is for you. Our sleeves with the snap rings at both ends maintain stability for a lifetime. This 500LBS bars weighs 40LBS while featuring ball bearings and oil-impregnated brass bushings providing smooth rotation. You will feel the difference between this bar and other bushing operated bars at once..
  • Medium Depth Knurling with a Center Knurl: LIONSCOOL 40LBS Olympic barbell offers 1.5mm diamond knurl with flattened top for a secure and non-slip grip while not being too aggressive. The 4.7” center knurl is most helpful when doing back squats. It grips your back and helps the bar to stay safely in place..
Check Stock

Titan Complete Quick Hitch Bushing Kit for 3 Point Hitch Tractors Top Link and Lower Lift Pins

  • QUICK HITCH BUSHING KIT: This 3Pt bushing kit allows you to adapt your implement to fit quick hitches. Simply slide the bushings onto your lower lift pins and top link pin to reduce and remove spacing for a better, more secure fit..
  • MADE FROM COATED STEEL: Each bushing will be made from zinc coated steel. This coating prevents the steel from rust and corrosion, so you do not have to worry about the bushings breaking down over time..
  • SIX TOP LINK PIN ADAPTERS: This Quick Hitch Bushing Kit will include 6 total top link adapters. These adapters range in length and thickness to allow you to convert category 0, category 1, and category 2 top link pins to better fit your quick hitch..
  • EASY INSTALLATION: With this bushing kit, installation is a quick and easy. Slide the top link bushing over your top link pin and use the shoulder bushings on your lower lift pins. Secure the shoulder bushings using the included roll pins by hammering them into position..
Check Stock

SHIGA Skateboard Longboard Replacement Bushings Conical Cushions - 92A Resiliency

  • Keep your skateboard better and more comfortable.
  • Are you still worried about the squeaking of skateboards? Our skateboard bushing has rebound, which brings you a quieter and smoother experience..
  • The bushing kit consists of a tapered top bushing and a cylindrical bottom bushing..
Check Stock

JessEm Model 08350 Dowelling Jig Master Kit, Black (08350-)

  • APPLICATION: Create 1/4, 3/8, and 1/2-inch dowel holes on the end or face of your work piece.
  • MULTIPLE DOWEL HOLE CONFIGURATION: Locations of dowels can be pre-set in 1/8-inch increments, perfect for creating multiple dowel hole configuration.
  • BUILT-IN ALIGNMENT SLOTS: Built-in alignment slot allows you to match up dowel holes that are spaced further apart for perfect aligned dowel holes.
  • STURDY CONSTRUCTION: Constructed of precision CNC machined aluminum, anodized for durability and laser engraved for fast set ups.
  • INCLUDED GUIDE BUSHING CARRIER: Includes 3/8-inch guide bushing carrier with 5 guide bushings, 1/2-inch guide bushing carrier with 3 guide bushings, and 1/4-inch guide bushing carrier with 7 guide bushings.
Check Stock

MOSNAI Golf Cart Shock Bushing Kit Fits Club Car 1982&Up DS and Precedent and EZGO 1989&Up TXT Marathon Golf Cart, 4 Shock Bushing Kit for Front and Rear Shocks, Set of 4, Replaces OEM# 1011415

  • Golf Cart Shock Absorber Bushing Kits. 4 Shock Bushing Kits for 2 SHOCK..
  • Fits 1982-Up Club Car DS & Precedent Gas & Electric Vehicles Replaces OEM# 1011415 and EZGO 1989-Up TXT Marathon Golf Cart..
  • This Shock Bushing Kit Fits All EZGO and Club Car Golf Cart with Stud Mounted Shocks..
  • Durable and Easy to install like Original Bushing Replacement.
  • Golf Cart Shock Bushing Kits includes 8 Rubber Bushings, 8 Retainer Washers, 4 Hex Pal Nut，4 Check Nut..
Check Stock