Top Bushing Shaft Spacer

TB Woods 1008 TL100858 Taper Lock Bushing, Cast Iron, Inch, 0.625\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper lock bushings from various manufacturers.
Check Stock

TB Woods 1108 TL110822MM Taper Lock Bushing, Cast Iron, 22 mm Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper lock bushings from various manufacturers.
Check Stock

TB Woods 2517 TL251758 Taper Lock Bushing, Cast Iron, Inch, 0.625\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper lock bushings from various manufacturers.
Check Stock

TB Woods 2517 TL2517238 Taper Lock Bushing, Cast Iron, Inch, 2.375\ Bore, 1200 lbs/in Torque, Standard Design, Shallow Keyway

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper lock bushings from various manufacturers.
Check Stock

TB Woods 2012 TL201230MM Taper Lock Bushing, Cast Iron, 30 mm Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper lock bushings from various manufacturers.
Check Stock

TB Woods 1610 TL161025MM Taper Lock Bushing, Cast Iron, 25 mm Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper lock bushings from various manufacturers.
Check Stock

TB Woods 1108 TL110858 Taper Lock Bushing, Cast Iron, Inch, 0.625\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper lock bushings from various manufacturers.
Check Stock

Lifstar 2-1/2-inch Diameter Nylon Pulley, Rope Pulley for Outdoor Clotheslines - Fits 1/4-inch Rope, 4 Pieces

  • 5.95" OUTSIDE DIAMETER , FITS 1-1/8" SHAFT DIAMETER. 1/4 KEYWAY IS STANDARD FOR 1-1/8" SHAFT, 182T & 184T FRAME MOTORS. KEYWAY NOT INCLUDED..
  • THIS CAST IRON DOUBLE GROOVE PULLEY TAKES 2 BELTS AND INCLUDES THE " H " STYLE TAPERED BUSHING..
  • GROOVES WILL FIT THE FOLLOWING V-BELT TYPES ( 3/8" TOP WIDTH 3L / 3LK) (1/2" TOP WIDTH 4L / 4LK / A / AK / AX ).
  • THE TAPERED BUSHING LOCKS ONTO YOUR MOTOR SHAFT AS YOU SCREW DOWN THE LOCK SCREWS, RESULTING IN A SUPER TIGHT INDUSTRIAL TAPERED LOCK..
  • MOTOR PULLEY IS MADE OF CAST IRON, THE H BUSHING IS MADE FROM C45 STEEL WITH BLACK OXIDE FINISH..
Check Stock

Martin SH 1 Quick Disconnect Bushing, Sintered Steel, Inch, 1\ Bore, 1.871\ OD, 1.31\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin JA 1 Quick Disconnect Bushing, Sintered Steel, Inch, 1\ Bore, 1.375\ OD, 1.06\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

MTD 717-1554 Pinion Gear & 941-0656A Hex Flange Bearing Kit

  • For MTD 741-0656 941-0656A 717-1554 for TORO 112-0863, Used on Riders since 1999. 11 Tooth. Splined Bore.
  • Steering Shaft Pinion Gear Replace for MTD 717-1554, Fits for Rotary 13229 bushing, Used on Riders since 1999. 11 tooth. Splined bore..
  • Hex Steering Bushing Specs, ID: 5/8" Ht: 1/4".
  • Fits for Cub Cadet 1170, 1180, 1212, 1515, 1517, 1525, 1527, 1529, 1600, 1800 Fits: Cub Cadet LT1018, LT1022, LT1024, LT1040, LT1042, LT1045, LT1046, LT1050, SLT1550, SLT1554, GT1222, GT1554 Fits: forTroy-Bilt Bronco, LTX1842, LTX2146, GTX2446, GTX2654, Horse, Big Red GT50 & GT54 Fits: Columbia CR30, White LT-5000, MTD Gold, Lawn Chief 46" Deck, Yard-Man, Yard Machines, Huskee Kit Contains: 717-1554 & 941-0656a,PARTS SKU:11KIT_WK1000041 Steering Shaft Pinion Gear.
Check Stock

CTS 500K Push Pull Short Shaft Audio Taper Potentiometers - Pair 2X - Includes Wiring Diagram

  • High Quality CTS Push Pull Pot - brass bushing and shaft.
  • Short Shaft (3/8" bushing height), 24-tooth fine spline shaft.
  • Double Pole Double Throw allows modification including coil splits, coil taps, phase shifting.
  • Not intended for use with import guitars using metric components.
Check Stock