Top Butt Weld Ball Valve
ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding
- Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
- Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
- Fits 3/16-inch to 26 gauge sheet metal materials.
- Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
- Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
- Tighten the winged nut to ensure a secure hold.
- Use all 16 clamps for larger projects, then joint weld between them.
- Package Included: Welding accessories set includes 16 welding corner square welder clamps.
- Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check StockEastwood Perfect Panel Prep Tool 18 20 Gauge Sheet Metal TIG MIG Butt Welds Creates Clean Holes
- Exclusive, Patent Pending, Design Provides A Perfectly Beveled 45° Weld-Prepped Edge In 20 Or 18 Gauge Sheet Metal.
- Proper Weld-Prepped Edges Allow Strong, Flush, Crack-Free Welds In Sheet Metal.
- Each Strike Forms A Perfect 0.062” X 45° Beveled Flange.
- Achieve Solid, Full-Penetration Mig Or Tig Butt Welds.
- Full Material Thickness After The Repair.
Check StockAr-15 Defensive Rifle Operation Maintenance Shooting Instruction Defensive DVD
- Mounts to rifle-length extension tube without A2 spacer (not included).
- Can be adapted for use with dozens of different rifle and shotgun chassis.
- Sloping cheek weld combines a slim profile with user comfort.
- Overall shape provides for offhand hold options.
- Rubber butt-pad provides positive shoulder purchase to prevent slippage.
- Large storage compartment easily accessible behind hinged butt-plate.
- Knockout bosses on the bottom allow for the addition of an optional accessory rail.
Check StockMagpul MOE Rifle Stock, Black
- Mounts to rifle-length receiver extension tube without A2 spacer (not included).
- Can be adapted for use with dozens of different rifle and shotgun chassis.
- Sloping cheek weld combines a slim profile with user comfort.
- Overall shape provides for offhand hold options.
- Rubber butt-pad provides positive shoulder purchase to prevent slippage.
- Large storage compartment easily accessible behind hinged butt-plate.
- Knockout bosses on the bottom allow for the addition of an optional accessory rail.
- Provides a high-quality, economical alternative to standard firearm parts.
- Distinguishes itself with a simplified feature set, but maintains Magpul engineering and material quality.
Check StockEastwood Pneumatic Perfect Panel Prep Tool 18 20 Gauge Sheet Metal TIG MIG Butt Welds Creates Clean Holes
- Exclusive Patent Pending Design, Which Easily Provides A Perfectly Beveled 45° Weld-Prepped Edge In 20 Or 18 Gauge Sheet Metal.
- Proper Weld-Prepped Edges Allow Strong, Flush, Crack-Free Welds In Sheet Metal.
- The Convenient Hole Punch Feature Provides Clean, Burr-Free 0.19” Holes.
- Each Strike Forms A Perfect 0.062” X 45° Beveled Flange.
- Achieve Solid, Full-Penetration MIG Or TIG Butt Welds.
Check Stock600A Arcair Carbon Arc Gouging Torch Arc Welding Equipment Welding Accessories Heavy Duty Industrial Grade Torch with Cables Grooves Machining Tool
- 【PRINCIPLE OF ACTION】The carbon arc gouging is a method of surface grooves machining which adopts carbon rods or graphite rods as electrodes to generate arcs with the workpiece and melt the metal, finally blowing the molten metal off with compressed air.
- 【TURN AT ANY ANGLE】The gun head can be rotated at any angle, suitable for various specifications of carbon rods.The product can operate in any position with great flexiblity.It has good accessibility, it’s easy and convenient to operate.
- 【ROTATABLE TAIL】The tail air pipe and the adapter can be rotated, which is convenient for application and simpler operation.High-quality cable hose provides high heat resistance and abrasion resistance.
- 【ONE-KEY VALVE DESIGN】One-button air valve is designed in the middle of the handle, which is easier to operate with the handle.It’s mainly used to dig the groove, clear weld defects, and remove weld root.
- 【HIGH ACCURACY】When clearing weld defects, the shape and depth of the flaw can be clearly observed under the arc.It’s high in precision and efficiency.It can reducing the labor intensity.
Check StockCURT 49090 2-Inch x 9-Inch Weld-On Raw Steel Trailer Hitch Receiver Tube
- STANDARD FIT. This hitch receiver tube features industry-standard inside dimensions, able to accept virtually any 2-inch x 2-inch shank, including a trailer hitch ball mount, tow hook or other receiver hitch accessories.
- HIGH-STRENGTH. This receiver tube is constructed from quality steel to offer dependable strength.
- REINFORCED COLLAR. To maximize strength at the opening, this hitch tube receiver is fitted with a 1/2-inch reinforcement collar.
- READY TO WELD. This weld-on hitch receiver comes with a raw steel finish to allow you to weld it into place right out of the package. It can be used for custom towing systems, workshop builds or other weld projects.
- PRE-DRILLED. For convenience, this weld-on trailer hitch receiver tube comes with a pre-drilled hole to readily accept a trailer hitch pin.
Check StockCURT 49240 2-Inch x 24-Inch Weld-On Raw Steel Trailer Hitch Receiver Tube
- STANDARD FIT. This hitch receiver tube features industry-standard inside dimensions, able to accept virtually any 2-inch x 2-inch shank, including a trailer hitch ball mount, tow hook or other receiver hitch accessories.
- HIGH-STRENGTH. This receiver tube is constructed from quality steel to offer dependable strength.
- REINFORCED COLLAR. To maximize strength at the opening, this hitch tube receiver is fitted with a 1/2-inch reinforcement collar.
- READY TO WELD. This weld-on hitch receiver comes with a raw steel finish to allow you to weld it into place right out of the package. It can be used for custom towing systems, workshop builds or other weld projects.
- PRE-DRILLED. For convenience, this weld-on trailer hitch receiver tube comes with a pre-drilled hole to readily accept a trailer hitch pin.
Check StockCURT 49120 2-Inch x 12-Inch Weld-On Raw Steel Trailer Hitch Receiver Tube
- STANDARD FIT. This hitch receiver tube features industry-standard inside dimensions, able to accept virtually any 2-inch x 2-inch shank, including a trailer hitch ball mount, tow hook or other receiver hitch accessories.
- HIGH-STRENGTH. This receiver tube is constructed from quality steel to offer dependable strength.
- REINFORCED COLLAR. To maximize strength at the opening, this hitch tube receiver is fitted with a 1/2-inch reinforcement collar.
- READY TO WELD. This weld-on hitch receiver comes with a raw steel finish to allow you to weld it into place right out of the package. It can be used for custom towing systems, workshop builds or other weld projects.
- PRE-DRILLED. For convenience, this weld-on trailer hitch receiver tube comes with a pre-drilled hole to readily accept a trailer hitch pin.
Check StockCURT 49180 2-Inch x 18-Inch Weld-On Raw Steel Trailer Hitch Receiver Tube
- STANDARD FIT. This hitch receiver tube features industry-standard inside dimensions, able to accept virtually any 2-inch x 2-inch shank, including a trailer hitch ball mount, tow hook or other receiver hitch accessories.
- HIGH-STRENGTH. This receiver tube is constructed from quality steel to offer dependable strength.
- REINFORCED COLLAR. To maximize strength at the opening, this hitch tube receiver is fitted with a 1/2-inch reinforcement collar.
- READY TO WELD. This weld-on hitch receiver comes with a raw steel finish to allow you to weld it into place right out of the package. It can be used for custom towing systems, workshop builds or other weld projects.
- PRE-DRILLED. For convenience, this weld-on trailer hitch receiver tube comes with a pre-drilled hole to readily accept a trailer hitch pin.
Check StockCURT 49060 2-Inch x 6-Inch Weld-On Raw Steel Trailer Hitch Receiver Tube
- STANDARD FIT. This hitch receiver tube features industry-standard inside dimensions, able to accept virtually any 2-inch x 2-inch shank, including a trailer hitch ball mount, tow hook or other receiver hitch accessories.
- HIGH-STRENGTH. This receiver tube is constructed from quality steel to offer dependable strength.
- REINFORCED COLLAR. To maximize strength at the opening, this hitch tube receiver is fitted with a 1/2-inch reinforcement collar.
- READY TO WELD. This weld-on hitch receiver comes with a raw steel finish to allow you to weld it into place right out of the package. It can be used for custom towing systems, workshop builds or other weld projects.
- PRE-DRILLED. For convenience, this weld-on trailer hitch receiver tube comes with a pre-drilled hole to readily accept a trailer hitch pin.
Check StockPVC COMPACT BALL VALVE 4" - Socket - Sanipro
- EZ-FLO SCHEDULE 40 PVC BALL VALVE: This EZ-FLO ball valve is suitable for use as an inline valve for connecting two pipes going in the same direction.
- equipped with a 3/4 inch slip connection on each end.
- DURABLE: This schedule 40 PVC ball valve is made of heavy-duty CPVC that protects against corrosion and provides strength and durability.
- EASY TO USE: This PVC ball valve is equipped with a quarter-turn red plastic handle for an easy-to-control water flow.
- SPECS: This valve can withstand a working pressure of 150 PSI and a maximum temperature of 140 degrees F.
- SAFETY: This ball valve complies with lead-free guidelines for potable water applications.
Check Stock