Top Butt Welding Pipes

Pipe Center Finder, Pipefitter Tools w/Centering Head, Pipe Fitting Tools Center Finder Tool to Measure Pipe Diameter Over 0.5" and Up, 4" Y-Type Base Fitted with Adjustable Dial Bubble Protractor.

  • ...se for pipe fitters and welders as a must have tool..
  • 【Y-Head Shape Base with a DSL】This safety pipe center finder has a 4 inch Y-type base fitted with an adjustable dial bubble protractor (DSL). You could push the center column down to the fixed point position as you want. It is a must have on your list of pipe welding tools..
  • 【Adjustable Dial Bubble Protractor】Printed with a scale in inches, an inch chart and tangent chart, this pipefitter tool can help you make straight lines around pipes. When judging the horizontal state, the bubble of the green liquid needs to be in the middle of two lines on the protractor. 【Note:】When determining the angle, the bubble of the green liquid should be in the horizontal position whatever the angle is..
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

3 Inch 2 x Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Universal butt joint band 3.0" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes..
  • Universal butt joint exhaust clamp fit for 3.0" OD pipe to 3.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Stainless steel clamp with great performance in anti-corrosion Stainless steel clamp with great performance in anti-corrosion.
Check Stock

Toolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)

  • 【Product Purpose】Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work..
  • 【Perfectly Align Panels】Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together..
  • 【Applicable Types】Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials..
  • 【Easy To Use】Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to make sure a firm fixation.
  • Use all 16 clamps for larger projects, then perform joint welding between them..
  • 【High Quality & Portable】These panel welding clamps are made of high quality matrial, which makes sure the durability and strength.
  • meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag..
Check Stock

Weller Mini Butane Torch - WLTBUM2

  • 【Durable】This propane torch hose is made of high-quality brass material, durable, long-distance and high-elastic hose, not easy to wear.Come with automatic ignition device.
  • 【Widely Use】 The propane torch kit can be widely used for precision brazing, pipe welding,processing meat (deburring), thawing pipes, melting ice and snow, barbecues, etc. The maximum temperature can up to 3600℉, suitable for welding 3/4" copper pipes..
  • 【Easy to Use】 Install the end of the welding torch on the gas cylinder, and then turn the bottom knob. It is equipped with Self-lgnition system and a 4.8ft hose to ensure a safe use. The flame output can be easily controlled by rotating the knob to meet the welding needs of different projects..
  • 【Ergonomic Design 】 The hose torch uses a vortex propane design that allows the flame to release maximum heat. The 4.8-feet hose ensures a safe distance between the propane tank and the flame. Ergonomic design, long-term use will not hurt your hands..
  • 【Operation And Tips】Use only MAPP and propane gas.
  • Connection standard: CGA600. Do not use this welding gun for a long time in a closed environment, because it will generate a lot of heat and consume a lot of air during work..
  • Before attaching torch to gas cylinder,check and ma....
Check Stock

10 Rods Copper Brazing Rod 15.7 Low Temperature Welding Rod Welding Consumables with Good Liquidity for Welding Refrigerator Air Conditioner Copper Pipes Copper Products

  • MATERIAL: 10 Rods copper brazing rods 15.7” are included in the package. The chemical composition of the brazing rods: Phosphor (P): 7%, Copper (Cu): the remainder..
  • ADVANTAGES: Brazing temperature range: 1310°F-1490°F. Solidus: 1310°F, Liquidus: 1490°F. Tensile Strength ( RM): 838 MPa. The PhosCopper brazing rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can also be opened for easy storage and use..
  • APPLICATION: High-quality copper brazing rod are used for the welding of refrigerator copper pipes, air conditioner copper pipes and copper water pipe, as well as for the electromechanical industry..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you better..
Check Stock

VCT Pneumatic Auto Body Air Punch & Crimper Crimping Flange Flanger Tool Pipe

  • This tool works as both an air punch and air flange for auto body repair at the shop or home garage! The air flange has a versatile head that rotates 360 degrees to easily crimp flanges or lap joint sheets and pipes. The punch can create 3/16 in. holes for fastening and welding..
  • Heavy duty head rotates 360° to easily crimp flanges or lap joint sheets and pipes.
  • Punches accurate 3/16 in. holes for fasteners or welding.
Check Stock

WeldingCity Acetylene Welding Brazing Nozzle 4-W-J (Size 4) with W-J Mixer for Victor J-Series Handles

  • PARAMETERS: 5x5x7mm large triangular welding tip: high temperature resistant 304 stainless steel alloy. Fixed Weld Head: High temperature 316 stainless steel. 5mm standard round mouth..
  • LARGE TRIANGLE WELDING TIP: concave welding tip (the plastic electrode does not move after welding), which is suitable for drawing and fixing before welding..
  • FEATURES: 100% new and high quality, good high temperature resistance, smooth welding surface, non-stick welding rod, no scratches on the welded surface, more beautiful..
  • COMPATIBILITY: Mainly suitable for replacement nozzles for heat guns equipped with diaphragm pumps and vinyl heat guns..
  • APPLICATION: Special welding tip for welding PP, PVC, PE sheets, water tanks, water tanks, plastic pipes, etc..
Check Stock

Forney 32110 E7014 Welding Rod, 1/8-Inch, 10-Pound

  • All position welding rod with digging arc, deep penetration on dirty, rusty and painted materials.
  • Ideal for joints requiring deep penetration such as square edge butt welds, good for vertical and overhead welding with light slag.
  • Excellent for galvanized steel and rusty/oily steel in maintenance or repair applications, plus pipe welding.
Check Stock

Forney 32005 E7014 Welding Rod, 3/32-Inch, 5-Pound

  • All position welding rod with digging arc, deep penetration on dirty, rusty and painted materials.
  • Ideal for joints requiring deep penetration such as square edge butt welds, good for vertical and overhead welding with light slag.
  • Excellent for galvanized steel and rusty/oily steel in maintenance or repair applications, plus pipe welding.
Check Stock

Propane Torch with 4.8ft Hose and Self Ignition Trigger, Mapp Gas Torch,Welding Torch for Brazing,Barbecue,Heating,Handheld Blow Torch For MAPP Cylinder

  • 【Widely Use】 The propane torch kit can be widely used for precision brazing, pipe welding,processing meat (deburring), thawing pipes, melting ice and snow, barbecues, etc. The maximum temperature can reach 3600℉, suitable for welding 3/4" copper pipes..
  • 【Easy to Operate】 Install the end of the welding torch on the Qcc1/Type1 propane tank, and then turn the bottom knob. It is equipped with Self-lgnition system and a 4.8ft hose to ensure a safe use. The flame output can be easily controlled by rotating the knob to meet the welding needs of different projects..
  • 【Excellent and Professional Design】 The hose torch uses a vortex propane design that allows the flame to release maximum heat. The 4.8-feet hose ensures a safe distance between the propane tank and the flame. Ergonomic design, long-term use will not hurt your hands..
  • 【Specifications and Note】 Please use gas type: MAPP, MAP-PRO propane.
  • Connection standard: CGA600. Do not use this welding gun for a long time in a closed environment, because it will generate a lot of heat and consume a lot of air during work..
  • 【Service and Quality Assurance】This propane torch hose is made of high-quality brass material, durable, long-distance and high-elastic hose, not easy to wear, we will provid....
Check Stock

Flux Core Welding Wire ARCCAPTAIN E71T-GS .030 2-Pound Spool Gasless Carbon Steel Mig Welding Wire

  • Welding Easy and Quick: AWS E71T-GS 030” Flux Core welding wire (The actual Net Weight of Wire is 2LB), no need for shielding gas, install it then you can welding all positions, single and multi pass welding. Great for T-joints, butt welds & lap welds..
  • Great Welding Performance: Smooth arc action and High feedability, you will love the less splatter when do your welding project. The flux filling acts as a shielding agent to create beautiful and clean welds. Perfect for Professional welder, metalworking hobbyist, or DIY enthusiast..
  • Self shielded gasless mig welding wire works well on rusty, dirty and painted Material, also strong resistant to base material oil pollution, perfect for use outdoors, high-altitude, and other different environments..
  • Professional Packing: Flux core welding wire is vacuum packed for waterproof, moistureproof, dustproof, then ensure optimum welding performance and effect..
  • Trusted Quality and Service: The mig welder wire was passed TÜV TEST, which made of the finest quality materials and using state of the art technology from a twenty year factory offering in the welding MIG accessories that conform to the high standards..
Check Stock