Top Butt welded Gate Valve

15x Heavy Duty Lockout Hasps 1.5inch Tagout Kit Safty Clamp Red

  • 【Save Water Bill】Are you worried about someone accessing your water without authorization? Well, Gate Valve Lock to solve your problem. The hollow circular housing fits perfectly over the handle of the faucet, insert a padlock and lock it, no more stealing water! And prevent others from using my water pipe.（Please confirm the size of the faucet and the product before purchasing to ensure that the product fits your faucet perfectly.).
  • 【Well Built】Our valve locks are made of ABS, an engineering material that is impact resistant and can withstand rough and harsh environments without cracking. When locked, the device is enclosed in the valve handwheel and can rotate freely to prevent the handwheel from opening accidentally..
  • 【Reliable Fit】Suitable for 1 to 2-1/2 inch diameter gate valve handle with up to 3/4 Inch Diameter Stems, can accommodate padlock shackle with max 3/8 inch outside diameter..
  • 【Bright and easy to follow】1 set of 2 red gate valve locks. Highly visible and eye-catching, no longer worry about being stolen water. (Note: locks and keys are not included, please purchase your own if needed.).
  • 【Application】It is suitable for outdoor faucets and used in combination with padlocks to help protect against valve opening during ma....
Check Stock

5\ Weldable Barrel Hinges Heavy Duty Bullet Hinges Weld on Steel, Detachable Ball Bearing Gate Door Hinges for Metal Swing Door,Trailer Ramp Gate,3/4\ Dia Pin,600 lbs Load Capacity(2Pcs)

  • Size：4.8 x 1.3 inch / 123 x 34 mm (L x W), 0.75 inch (19 mm) diameter Pin. 600 lbs load capacity..
  • High Quality Materials：Heavy duty weld on barrel hinges are made of carbon steel Q235B, high strength, high load capacity and hardness for long service life..
  • Smooth & Mute：Bullet hinges weld on steel with ball bearing can be rotated 360 degrees, low friction, more smoother and quieter..
  • Application：Male to female weldable gate door hinges can widely for sliding door, metal door, swing gate, trailer ramp gates, garage door, windows or anywhere you need a hinge to weld on..
  • Easy to use：Hinge pins are welded to either the outer frame or the gate/door and then inserted into the welded hinge pin to create custom, heavy-duty hinges..
Check Stock

J bolt gate Hinges Heavy Duty 5/8\ pivot hinge Adjustable Barrel Driveway Pair for welding

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

1 Pair Heavy Duty Barrel Gate Hinge 5 inches, Door Hinge Barrel Style for Swing Gate, Trailer Ramp Gate 450lb Capacity - Weld On Install

  • MATERIAL: The door hinge made of cold rolled steel, strong and corrosion-resistant.
  • SIZE: Total length is 5 inches, barrel diameter is 1.2 inch and pin diameter is 1 inches, mounting plate gap is 1.2 inches.
  • each gate hinge can easily hold up to 450 lbs.
  • Matte black coating and durable thick steel material giving it a longer service life and anti- rust features..
  • EASY TO INSTALL: Welding required for installation, better remove the black powder coat on the mounting plate before welding.
  • GREAT FOR: Heavy duty swing gate, trailer ramp/ trailer gate, can hold up the gate well and prevent the gate from sagging.
Check Stock

HVDI Stainless Steel Gas Can, Safety Portable Emergency Gasoline Diesel Can Tank, Backup Thickened Tight Sealed Gas Tank with 3 Handles, Vent and Flexible Spout Kit for Vehicles, Cars, Trucks(5Gallon)

  • ✔【Portable Flexible Spout Kit】The built-in filter effectively removes impurities, and you can choose either built-in or external oil guide tube, so you don’t have to worry about losing it..
  • ✔【Humanized Design】The gas tank has 3 handles, which support two people to lift. the stainless steel air release valve can balance the internal and external air pressure, and the oil outlet is expanded to 5cm for quick oil output..
  • ✔【Wide Use and Worry-Free Vouchsafing】This gasoline tank is suitable for various liquids such as gasoline, diesel, gasoline, water, etc. If you want higher quality, easier and more comfortable products, please choose us. Customer Satisfaction is our top priority. Please contact us if you need any assistance..
Check Stock

Heavy Duty Gate Hinge Pair - 5 inches Barrel Style 450lb Capacity - Weld On Install

  • MATERIAL - Matte black coating and durable thick steel material giving it a longer service life and anti-rust features.
  • EASY TO INSTALL - Welding required for installation, better remove the black powder coat on the mounting plate before welding.
  • LOAD CAPACITY - 5" Barrel Style 450lb load Capacity hinges are Hollow cylinder shaped, perfect for a 90 degree hard swings or more depending on the installation.
  • GREAT FOR - Heavy duty swing gate, trailer ramp/ trailer gate, can hold up the gate well and prevent the gate from sagging.
  • NOA STORES 100% SATISFACTION GUARANTEE – Our first priority is your SATISFACTION. If you have any problem, just leave a message and we will find the best solution that will make you 100% happy.
Check Stock

PSCCO 4PCS Butt Welding Clamps Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • A set of 4 Intergrips firmly fix the flat or curved panel edge-to-edge and surface-to-surface to achieve a good clean connection..
  • The welding clamp is made of galvanized steel, which can prevent rust and is easy to install or disassemble..
  • Butt welding tongs can fix workpieces for precise butt welding and side-to-side welding..
  • A large number of fixtures suitable for any welding kit. The gap between the board and the board is maintained at 0.40 inches for edge-to-edge welding..
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

Invisible/Concealed Single Door Hinge [Set of 2] Finish: Bright Brass Plating

  • The butt hinges are suitable for furniture lids, cabinet doors, wardrobe doors, tool boxes, jewelry storage boxes, etc.
  • Butt hinges are made of good quality material which can prevent blotching and corrosion. More stable, durable, convenient and practical.
  • These gate hinges can be used on domestic garden,barn doors and even shed doors.These metal gate hinges can also be used on a range of different materials..
  • Thinges offer additional support to doors allowing the door hinges to be used on a number of light to medium door types..
  • Thanks for visiting. Our store promises that all products are new products, if you have any questions, please email me, I will reply you within 24 hours.
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Heavy Duty Gate Hinge Pair 7 inches | Door Hinge Barrel 900 Lbs Load Capacity for Swing Gate, Trailer Ramp Gate - Weld on Install

  • MATERIAL - Matte black coating and durable thick steel material giving it a longer service life and anti-rust features.
  • EASY TO INSTALL - Welding required for installation, better remove the black powder coat on the mounting plate before welding.
  • LOAD CAPACITY - 7" Barrel Style 900lbs load Capacity hinges are Hollow cylinder shaped, perfect for a 90 degree hard swings or more depending on the installation.
  • GREAT FOR - Heavy duty swing gate, trailer ramp/ trailer gate, can hold up the gate well and prevent the gate from sagging.
  • NOA STORES 100% SATISFACTION GUARANTEE – Our first priority is your SATISFACTION. If you have any problem, just leave a message and we will find the best solution that will make you 100% happy.
Check Stock

Heavy Duty Gate Hinges 7 Inches- 2 Pack Weld On Install Black Iron Barrel Hinge 900lbs Capacity for Swing Door Trailer Ramp Metal Driveway Gate Drive Gate

  • Solid Heavy Duty Hinges: Made of durable solid steel, we offer 2 size for you to choose : 7inch and 5 inch barrel hinges, the 7 inch hinge can hold up to 900 lbs capacity and 5 inch hinge can hold up to 450 lbs capacity..
  • Weld on Install - This metal gate hinge is perfect for heavy duty swing gate, trailer gate ramp, driveway gate and the extra thick back plate make it can be easily welded on..
  • Smooth Swing Design: Features grease fitting nipple keep the internal ball bearings lubricated, making this hinges swing smoothly and extending the working life of the gate hinges..
  • Anti Corrosion & Rust-Resistant: Matte black coating finish surface, this heavy duty barrel hinges are suit for outdoor and indoor using..
  • What You Get: 2 pack heavy duty barrel hinges , our 12 month 100% money back guarantee and friendly customer service..
Check Stock