Top Cable Card Pcie

Adaptec RAID 71605 Storage Controller 2274400-R

  • ▶【8 Ports SATA 3.0 Adapter Card】: Acasis SATA card is equipped with 8 SATA 3.0 interfaces and supports the simultaneous connection of 8 SATA hard disks, the transfer speeds up to 6Gbps, You could add 8 6Gb/s SATA 3.0 devices to your computer with this PCIe SATA card.
  • ▶【Easy to Install】: PCIe to SATA 3.0 Host Controller Card with a standard profile Bracket, PCIE Gen 2 X1 interface design, will works on PCIE X1, X4, X8, X16 slot, compatible with most size chassis on the market. Users need to check if PCs or Servers have at least one PCIE X1 slot on mother board before purchase.
  • ▶【80TB Expansion】: 8 Ports SATA 3.0 interfaces can expand to 80 TB, provide a high-volume database for your workstation and computer equipment. With using The chip JMB575+JMB1064 Chipset, improve this card more stable and compatible.
  • ▶【Supports Soft-RAID Mode】: The system comes with soft RAID and support four storage modes: RAID1 (SAFE Mode), AHCI1 (PM Mode), SPAN (BIG Mode) and RAIDO (FAST Mode). Supports Windows 7/ 8.1 / 10 / Linux, install the driver before add the HDD in system.
  • ▶【What You Get】 : 1 x 8-port SATA 3.0 controller card, 8 x SATA cable, 2 x SATA power splitter cable, 1 x user manual.
Check Stock

Zalman CNPS9900-MAX Blue Ultra Aero Flower for Intel and AMD CPU Cooler

  • FULL-SPEED PCI-E 3.0 x16 128Gbp/s BANDWIDTH: AsiaHorse pcie 3.0 riser cable will deliver all the performance of PCIe 3.0 to your GPU, supporting PCI 3.0/2.0/1.0 applications. Doesn’t Support PCIE4.0..
  • EMI SHIELDED DESIGN: The pcie riser cable utilizes the latest materials for EMI shielding, allowing each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emissions of electromagnetic frequencies, minimize disturbance and degradation on performance..
  • EXTENDED AND ANGLE: With 25cm of cable length and a 180° female PCIe connector, making this pcie extender minimizes cable stress and easily install your GPU in compatible cases..
  • COMPATIBILITY: Flexible and extended PCI-Express slot with 1x/4x/8x/16x compatibility. Support GTX1080, GTX1080Ti, RTX2060, RTX2070, RTX2080, RTX2080Ti, RTX3080,RTX3090, RX570, RX580, GTX680, GTX670 GTX760 etc..
  • NOTICE: The transmission speed depends on the motherboard and graphics card speed is consistent. For example: PCI-E graphics card is 2.0, the motherboard PCI-E 16X is 3.0, then the actual transmission speed is 2.0, and vice versa..
Check Stock

Cable Matters 2-Pack 6 Pin PCIe to Dual SATA Power Cable 4 Inches, 2X SATA to 6 Pin PCIe

  • PCI express power cable video card power cable adapter connects a PCIe video card to a power supply with two spare SATA power connections.
  • PSU upgrade saver power cable provides an option for a power supply without a PCIe connection for GPU power.
  • 6 pin PCIe to dual 15 pin SATA female to male cable provides a convenient solution for video graphics card power with two SATA connectors for GPU cards that require more power.
  • Sturdy graphics card power cable has male SATA connectors with keyed rails and a female PCI connector with a latch for a secure connection on each end to prevent accidental disconnections.
  • Video graphics card compatible with graphics cards from popular manufacturers such as GeForce GTX 750Ti, EVGA GeForce GTX 750 Ti / GT 740 / GTX 950 / GTX 960 / GTX 980Ti, Gigabyte GeForce GT 610/ GTX 750 / GV-N950OC-2GD / GTX 750 Ti / GV-N75TOC2-2GI, Sapphire Radeon NITRO R9 380, and XFX RADEON R9 290.
Check Stock

Lian Li O11DMINI-1 Vertical GPU Bracket KIT /PCIE 4.0 / White -O11DMINI-1W-4

  • Vertical Graphics card holder for O11Dynamic XL with PCI-E 3.0 Riser Cable.
  • "NOT" Compatible with PCI-E 4.0​​ VGA Card.
  • 5 slots offer builders more installation options.
  • Included PCI-E Riser Cable , allows you to mount a PCI-E 16X Card..
  • In the condition of using the included riser cable (PCIE3.0) with a PCIE 4.0 motherboard and a PCIE 4.0 GPU, please follow steps to set up your BIOS to make it compatible..
Check Stock

AsiaHorse New PCIE 3.0 16x High Speed Flexible Extender Riser Cable Card Extension Port Adapter 200mm(90 Degree Angle Black)

  • FULL-SPEED PCI-E 3.0 x16 128Gbp/s BANDWIDTH: AsiaHorse pcie 3.0 riser cable will deliver all the performance of PCIe 3.0 to your GPU, supporting PCI 3.0/2.0/1.0 applications. Doesn’t Support PCIE4.0..
  • EMI SHIELDED DESIGN: The pcie riser cable utilizes the latest materials for EMI shielding, allowing each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emissions of electromagnetic frequencies, minimize disturbance and degradation on performance..
  • EXTENDED AND ANGLE: With 25cm of cable length and a 180° female PCIe connector, making this pcie extender minimizes cable stress and easily install your GPU in compatible cases..
  • COMPATIBILITY: Flexible and extended PCI-Express slot with 1x/4x/8x/16x compatibility. Support GTX1080, GTX1080Ti, RTX2060, RTX2070, RTX2080, RTX2080Ti, RTX3080,RTX3090, RX570, RX580, GTX680, GTX670 GTX760 etc..
  • NOTICE: The transmission speed depends on the motherboard and graphics card speed is consistent. For example: PCI-E graphics card is 2.0, the motherboard PCI-E 16X is 3.0, then the actual transmission speed is 2.0, and vice versa..
Check Stock

(2-Pack) COMeap GPU PCI Express Power Extension Cable PCIe 8 Pin Female to 8 Pin(6+2) Male Adapter 9-inch(23cm)

  • 『Solution』Providing a convenient solution for extending the connection length from PCIe cable to GPU.
  • 『PCIe 8P Extension』PCIe 8 pin female end to plug into the PCIe 8 pin male connector of PCIe cable and 8 pin(6+2) male end to plug into the video graphics card (8 pin (6+2) end could be used as 6 pin or 8 pin end by sliding on/off the 2 pin).
  • 『Compatibility』Compatible with 6-pin & 8-pin graphics cards from popular manufacturers such as: ASUS, ASRock, EVGA ,Gigabyte, Radeon, Sapphire, NVIDIA Tesla, etc..
  • 『Parameter』Length(including connectors): 9-inch(23cm), Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 2pcs, Self-adhesive tape*1pcs.
  • 『Note』This cable was only designed for graphics card (GPU), not motherboard or CPU. It will be damaged and burned once you connect it to motherboard or CPU and we won’t take any responsibility for wrongly using or installing. Please contact us if you have any questions.
Check Stock

2 Pieces PCI-e PCI Express 36Pin 1X Extension Cable Riser with Gold-Plated Connector (90 Degree 20 cm)

  • You will receive: the package comes with 2 pieces of 90 degrees connecter 36PIN 1X extension cable, which is suitable for any type to mounting GPU quality solder points and enough quantities can also satisfy you daily use and replacement demands.
  • Compatible with: our high speed cable allows the PCI Express video card to be positioned correctly in any direction, and it is compatible with PCIE 3.0/2.0/1.0, does not support PCIE 4.0, and please do not over bend the cable, as it will result in poor signal.
  • Ideal function: with the help of this PCI Express 36Pin 1X extension cable, you can move it from the motherboard to the invisible part of the PC case, add an expansion card in the slot blocked by the CPU cooler, which can well hide your wireless module, holding a decorative and practical functions with a four-port SATA card.
  • Works well: this riser cable is reliable and serviceable, and you can bend the end of the port that goes into the motherboard 90 degrees without the connector breaking or losing continuity, which will give you a lot of convenience and it works well with no loss of quality.
  • Reliable and reusable to use: these pcie cable extensions are designed in quality cable material, soft and reliable, and easy for you to install in a 1U/2U case....
Check Stock

SATA Card 4 Port with 4 SATA Cables, 6 Gbps SATA 3.0 Controller PCI Express Expression Card with Low Profile Bracket Support 4 SATA 3.0 Devices

  • ▶【10 Ports SATA 3.0 Adapter Card】: Acasis SATA card is equipped with 10 SATA 3.0 interfaces and supports the simultaneous connection of 10 SATA hard disks, the transfer speeds up to 6Gbps.
  • ▶【Easy to Install】: PCIe to SATA 3.0 Host Controller Card with a standard profile Bracket, can be used on PCIe X4/X8/X16 card slots, compatible with most size chassis on the market.
  • ▶【80TB Expansion】: 10 Ports SATA 3.0 interfaces can expand to 80 TB, provide a high-volume database for your workstation and computer equipment. With using The chip JMB575+JMB1166 Chipset, improve this card more stable and compatible.
  • ▶【Supports RAID Mode】: RAID1 (SAFE Mode), AHCI1 (PM Mode), SPAN (BIG Mode) and RAIDO (FAST Mode). Supports Windows 7/ 8.1 / 10 / Linux.
  • ▶【What You Get】 : 1 x PCIe to SATA 3.0 10-port controller card, 10 x SATA cable, 2 x SATA power splitter cable, 1 x user manual.
Check Stock

smartelf PCIe X1 SATA III Card 6 Ports ASM1166 Chip, SATA 3.0 6Gbps PCIE Controller Expansion Card Adapter with 6 SATA Cables+Thin Bracket,Non Raid

  • ... PC’s SSD/HDD is in AHCI boot mode, you can directly insert the hard drive into this sata card, no driver needed, just plug and play.(Note: please make sure that the PC’s SSD/HDD is in AHCI boot mode, otherwise a blue screen will be reported.).
  • [ What You Get ] 1* PCIe to SATA III 6-port expansion card.
  • 1* Use Manual. If you have any questions please feel free to contact us, we will definitely reply within 24 hours..
Check Stock

PCIE Riser Card 8 Capacitors,GPU Extender Riser Card for Bitcoin Litecoin ETH Ethereum Mining,with 60 cm USB 3.0 Extension Cable & 6PIN SATA Power Cable (V009s-PLUS,6 Pack)

  • ✅【PCIE Riser Card】The motherboard PCIE X1 slot can be expanded into a PCIE X16 slot, which will provide a safe and reliable connection for more graphics cards..
  • ✅【8 solid capacitors】The PCIE riser adopts 8 solid capacitors to make the power supply of the graphics card more secure and stable. Equipped with a 15Pin SATA to Molex 6Pin power cable for enhanced power supply..
  • ✅【Reduce the burden】The GPU riser makes the power supply of the graphics card independent of the motherboard, thereby reducing the burden on the motherboard when multiple graphics cards are connected..
  • ✅【Strong stability】The PCIE riser uses a 60cm USB 3.0 cable, which can be easily placed and wired, with multi-layer shielded wire, the signal will not be weakened within 3 meters, and mining is more stable..
  • ✅【Support system】Compatible with MAC, LINUX and WINDOWS systems, no need to install drivers, plug and play. If you have any questions about the product, please contact us..
Check Stock

SupaHub SATA Card 8 Port, Non Raid SATA Expansion Card for SATA III 6G Hard Drives for Desktop, Includes 8 SATA Cables and 2 SATA Splitter Cables

  • Non-Raid 8 Ports SATA Card: This PCIE SATA card allows you to add 8 SATA 3.0 6Gbps devices to your computer. The BIOS of DELL and Lenovo motherboards will shield the third-party adapter card, do not order this SATA controller card if you use the motherboards of these two brands..
  • Two chips: The use of these two chips enhances heat dissipation, durable high temperature resistance, and more stable operation..
  • Operation Systems & Driver: Supports Windows 7/8/10. Please install the drivers, otherwise some problems may occur such as "does not work", "Only some ports work", "Only a few indicators are on", "The slot is empty” or “It’s incompatible”. Contact us if you need for the link to download the driver..
  • Interfaces: Supports PCI-E x1, x4, x8, x16. PCI slot is incompatible. You should power off the SATA PCIe card before inserting it into the motherboard or removing it..
  • Package includes: 1* 8-Port PCIe SATA Card.
Check Stock

Chris Johnson's On Target Living Cooking: Eat Healthy, Feel Satisfied, One Delicious Meal at a Time

  • Tableau TK7U- BNDLB + SiForce Case Kit includes: T7u Tableau Forensic PCIe Bridge, TP2 Power Supply + Line Cord, TC-USB3 USB 3.0 A to B cable, TDA7-1 Tableau PCIe Card SSD Adapter, TDA7-2 Tableau PCIe M.2 SSD Adapter, TDA7-3 Tableau PCIe Adapter for Apple SSD, TC-PCIE-4 Tableau PCIe Adapter Cable, T7u Quick Reference Guide, SiForce Transport Case..
  • SiForce Transport Case provides all-around protection for devices and cables from water, dust, and external damage..
  • Suitable for both the field and lab. USB 3.0 host computer connection. Read/write mode capability via internal DIP switch..
  • NOTE: The T7u Tableau Forensic PCIe Bridge will not read M.2 SATA drives. For SATA drives please see the Tableau T35u SATA/IDE bridge..
  • Integrated, backlit LCD presents useful bridge and PCIe device information.. Six LEDs provide status on power, host connection, PCIe media detection, write-block status, and activity..
Check Stock