Top Cable Connector Pin Crimper

CBK 7 Pin Male OBD1 to OBD2 OBDII 16 Pin Diagnostic Adapter Cable for Ford EFI

  • OBD II connector adapter specific for Ford cars (7-pin). The OBD 2 connector is 16-pin socket. This is a small adapter with 15cm cable connects a....
  • Connects a 16 pin OBD2 diagnostic tool to a car with 7 pin socket..
  • The cable has two connectors: one is 7 Pin connector, another is 16 Pin OBD OBDII connector..
  • The cable can be used for converting connection from 7 Pin to OBD OBDII 16 Pin interface, allows you use OBD OBDII diagnostic tools working with your....
Check Stock

Creator 20PIN OBD1 to 16PIN OBD2 Connector Adapter Cable Compatible for BMW E31 E32 E34 E36

  • Works on All BMW with 20 PIN Diagnostic Connector.
  • Connector: Compatible for BMW 20Pins male connector, OBDII 16pins female connector.
  • It is only one piece of BMW 20PIN Connector adapter cable in the package, this cable can works with creator c110 or c310 BMW scanner for scanning old....
  • 20Pin to OBD II 16Pin connector cable could connect the BMW to the car reader for car inspection.
  • Note: The item is just an adapter, NOT a scanner. Package included: 1* 20Pin to 16Pin OBD2 Adapter.
Check Stock

3 Pack PWM Fan Splitter Cable 1 to 3 (4 Pin+3 Pin)

  • PC fan splitter cable：these 27 cm extension cables allow you more choice in where you want to position your PWM or fans inside your case, good for your daily use.
  • This Y-type splitter cables is convenient for running three fans on one fan header.
  • 4 pin fan splitter cable connects 3 computer case fans to a single motherboard fan header ；Every Pack Compatible With 1 pcs 4 Pin + 2 pcs 3 Pin PMW Fan Connector.
  • CPU fan splitter cable Product function:provide two additional fan to increase airflow in your computer case, reduce the accumulation of heat within the chassis.
  • The 4-pin connector supports 3-pin and 4-pin fans.
  • Temperature control: the pwn fan splitter cable provide additional fans to increase airflow in the computer case, reduce the temperature and ensure the operational speed of CPU.
  • Supports 3 PWM fans from a single motherboard PWM header.
  • Compatible with 4pin PMW fan connector and 3pin fan connector.
Check Stock

Toolwiz Battery Cable Lug Crimping Tool AWG 1/0, 2, 4, 6, 8, 10 Ratchet Wire Cutting for Crimper Tools Terminal Wire Cable -Thickened and Reinforced the Metal Plate Battery Cable Crimper

  • 【ROTATE CRIMP DIES】Toolwiz Wire Crimper Cable Crimp has 6 dies of 6/10/16/25/35/50 mm² ( 10, 8, 6, 4, 2, 1/0 AWG ), using rotating heads with a spring loaded locking pin to keep the heads. Please note that product dimensions are Metric 6/10/16/25/35/50 mm² (not AWG)..
  • 【ERGONOMICS DESIGN】Anti-slip rubber coated handle for a more comfortable and saving labor work. Self-locking and releasing mechanic unit of Toolwiz battery cable crimping tool ensure high crimping quality when crimping repeated.
  • 【EASY OPERATION】Toolwiz electrician crimper tool operates by pressing the screw and rotating the dies to the size you need, then just take a strong pull of the ratcheting wire terminal crimper to produce a good crimp on cable lugs.
  • 【DURABLE】Toolwiz electrical tools crimper is made of SCM-40 hardened steel for a durable and specially thicken and reinforce the metal plate on crimp head for lifetime use..
  • 【LIGHT WEIGHT & PORTABLE】 -Toolwiz wire crimping tool is 15.3 x 5.1 x 1.6in (39*13*4.2cm), 3.08lb (1400g), light weight and easy to carry, easy to get in tight locations.
Check Stock

IWISS Delphi Weather Pack Crimper Metri Pack Crimping Tool Wire Crimper for Sealed Weatherproof Automotive Electrical Connectors AWG14 to AWG24

  • ★【what you get】: In this pin terminals tool kit, it include a crimper tool, as well as 21pcs terminals removal key tools which are 7pcs single....
  • ★【Durable Quality】: The crimper tool which head is made of high-quality carbon steel, strong and durable for long time use. Ergonomically....
  • ★【Pratical crimping tool】: It offers 5 different sized crimps in a tool, double-hinge mechanism that keeps the jaws parallel for a straight....
  • ★【Terminal Removal Tool】: These tool are used for removing terminal wires from the wire harness connector and add a new wire. Easy to install,....
  • ★【Application】: The tools set is a common tools which can be used for most cars, motorcycles, household appliances. The crimper is perfect for....
Check Stock

2 Pack SATA to 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to 15 Pin SATA Computer Cooler Cooling Fan Power Cable

  • 15 pin SATA to 3 pin / 4 Pin 12V PC case fan power adapter cable.
  • Power 3pin or 4pin (PWM Connector) PC case fan with a 15pin SATA connector.
  • High density black sleeving cable, 10.6 inch length, cable is backwards compatible with standard 3-pin fans.
  • Fans will be operated at the fixed SATA voltage of 12V.
  • 2 Pack SATA to 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to 15 Pin SATA Computer Cooler Cooling Fan Power Cable.
Check Stock

CPU 8 Pin Power Extension Cable ATX CPU 8 Pin Female to 8(4+4) Pin Male EPS Extension Cable for Motherboard (Not PCI-e VGA) 12 Inches (2 Pack) TeamProfitcom

  • Connector 1: standard ATX CPU 8 pin EPS-12V female (connect to power supply 8 pin EPS).
  • Connector 2 : EPS-12V 8(4+4) pin male (connect to Motherboard 8(4+4) pin EPS).
  • This cable is compatible with ALL power supplies !!!.
  • EPS 8 Pin Power Extension Cable features one ATX CPU 8 Pin 12V female connector and one 8(4+4) Pin ATX 12V male connector, extending your cable length from the power supply to the CPU motherboard by 12-inches ( This cable NOT pci-e 8 pin ).
  • Length :12 inshes, Gauge:standard 18 AWG - UL1007 , Max power rating: 500W.
Check Stock

RJ45 Crimp Tool Kit Pass Thru Ethernet Crimper for Cat5e Cat6 Cat6a 8P8C Modular Connectors, All-in-One Cat6 Crimping Tool and Tester(9V Battery Not Included)

  • 【Professional RJ45 Crimper】➤➤Ethernet crimping tool kit includes RJ45 Crimper Pass Through,20PCS CAT6 Pass-Thru Connectors, 20PCS Connector Covers, 1 x Wire Stripper and 1 x Network Cable Tester(9V Battery Not Included)..
  • 【All-In-One RJ45 Crimping Tool】➤➤Wire stripping, crimping, and cutting tool for paired-conductor data cables.Ideal for crimping 8 position modular plugs such as CAT5e, CAT6 and CAT6a connectors (including shielded) (not AMP).
  • 【Wide Application】➤➤Designed for use with telephone lines, alarm cables, computer cables, intercom lines, speaker wires, and thermostat wiring Scanning Function - Find out working wire (network cables, phone lines, coaxial cable, buried cable and even cable behind wall).
  • 【Long-Lasting for Use】➤➤ RJ45 crimp tool passthrough is made of professional-grade heavy-duty steel so it delivers exceptional torque without bending. Black oxide finish resists rust and corrosion, making our cat6 pass thru crimper an outstanding electronics tools for cuts and strips wires..
  • 【Good Workmanship】➤➤The blades are made of hi....
Check Stock

PWM Fan Extension Cable | PC Cooling Fan Power Extension Cord | Compatible with ATX Case 3 Pin & 4 Pin Cooling Fans | 10.5" Black Durable Nylon Braided Cable (4 Pack)

  • ✔PC FAN EXTENSION CABLE 4 PIN AND 3-PIN✔ Our PWM fan splitter cable for PC motherboard cooling fans are constructed using high-quality nylon and cable is strongly braided to provide long-lasting performance as well as to avoid dust and breakage..
  • ✔CASE FAN EXTENSION CABLE✔ The PWM fan cable is designed with the capability of expanding one motherboard PWM fan header to support internal cooling fans to reduce the load on the motherboard..
  • ✔FAN SPLITTER CABLE WITH MANY FUNCTIONS✔ The 4pin PWM to 3pin standard fan adapter cable provides better power supply for motherboard fans, supports PWM function, speed regulation, and satisfies all your control needs to increase the lifespan of the motherboard..
  • ✔CASE FAN POWER SPLITTER FOR 3-PIN AND 4-PIN✔ The PWM cable extension is mostly compatible with 4-pin and 3-pin PC case motherboard cooling fans.
  • the extension cord ergonomic design offers you a greater flexibility between motherboard and CPU cooling fans..
  • ✔CPU FAN EXTENSION CABLE 3 PIN AND 4-PIN COMPATIBLE✔ The connector types of PWM fan extension cable includes one 4-pin Female plug connector and one 4-pin Male plug connector.
  • it is designed for enthusiasts with need for controlling numerous system fans..
Check Stock

SATA to 3 x 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to 15 Pin SATA Computer Cooler Cooling Fan Splitter Y Power Cable 2-Pack

  • 15 pin SATA to 3 x 3 pin / 4 Pin 12V PC case fan splitter Y power adapter cable.
  • Power three 3pin or 4pin (PWM Connector) PC case fan with a 15pin SATA connector.
  • High density black sleeving cable, 10.6 inch length, cable is backwards compatible with standard 3-pin fans.
  • Fans will be operated at the fixed SATA voltage of 12V.
  • SATA to 3 x 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to 15 Pin SATA Computer Cooler Cooling Fan Splitter Y Power Cable 2-Pack.
Check Stock

Brileine Battery Cable Crimping Tool from AWG 8-1/0, Battery Cable Lug Crimper Tool for Heavy Duty Wire Lugs, Battery Terminal, Copper Lugs AWG 8-1/0

  • The Battery Terminal Crimper - Built in 6 ways 6mm²/10mm²/16mm²/25mm²/35mm²/50mm²(Similar to 6 dies of 8, 6, 4, 2, 1, 1/0 AWG) using rotating heads with a spring loaded locking pin to keep the heads.
  • Durable Material - Made of high quality carbon steel is more sturdy and durable for heavy crimping works.
  • Comfortable Ergonomics Design Handles - Comfortable grip with Anti-slip surface saves strength and improves user's experience.
  • Easy Operating Way - Press the screw and rotate the dies to the size you need, then just take a strong pull of the ratcheting wire terminal crimper then produce a good crimp on cable lugs.
  • Battery cable crimper with high precision jaw design ensure a tightly connection after crimping with strong work pressure, which this tool has widely application in automatic electronics work.
  • Widely Application in the Copper & Aluminum Cable lug and Non-Welding & Standard Electrical Connection.
Check Stock

YOUKITTY PWM Fan Splitter, 4-Pin Adapter Cable Y Splitter PC CPU Fan Splitter PC 4-Pin Fan Extension Power Cable 1 to 4 Converter 10 inch (2 Pack)

  • Connector 1: 4-pin female connector port..
  • Connector 2: 4-pin male connector (1 of which is 4-pin and 3 of which are 3-pin)..
  • Compatibility: the cable is compatible with all 4-pin and 3-pin chassis fan coolers and with 4-pin and 3-pin PMW fan connectors..
  • Functionality: a 4-pin female connector on one end connects to the motherboard port and a 4-pin male connector on the other end (1 of which is 4-pin and 3 of which are 3-pin) allows 4 computer case fans to be connected to a single motherboard fan header, with the fan distributor cable providing additional fans to increase airflow in your computer case..
  • Parameter specifications: Length 10 inches (25 cm) (approx.). Quantity: 2 pieces..
Check Stock