Top Calibration Included

Digital Pocket Scale Set,100 g 0.01 g Mini Scale Electronic Grams Scale with 1 g, 2 g, 5 g, 10 g, 20 g, 100 g Calibration Weight and Calibration Weight Tweezer for Food Jewelry, Totally 8 Pieces

  • What you get: you will receive 1 piece digital pocket scale( batteries not included ) and 6 pieces calibration weight( including 1 g 2 g 5 g 10 g 20 g 100 g ) and 1 piece calibration weight tweezer, totally 8 pieces for you, a convenient combination for your daily use.
  • Accurate and sensitive: the digital pocket scale is built with high precision sensor system, providing you with instant and accurate results from 0.01 g to 100 g, which gives you a high accuracy weighing reading.
  • Please notice that the maximum measuring range of the scale is 100g, don’t weigh things that heavier than 100g.
  • Multiple weighing modes: the electronic grams scale includes the necessary unit measurements for easy weight translations, can convert measurement between in g/ct/oz/ozt/dwt/tl/gn, easy to choose the proper unit by pressing the mode button.
  • Calibration weight and tweezer: to ensure an accurate weighing reading, we provide 1 g, 2 g, 5 g, 10 g, 20 g and 100 g calibration weight and a calibration weight tweezer for you, just want to make your life much easier and more convenient.
  • You just need turn on the scale wait for the display to show "0.00", then press MODE until it shows "200.00", then press the MODE again and the display will flash "CAL", place the required calib....
Check Stock

Traceable Excursion-Trac™ Data Logging Thermometer with Calibration; 1 Bottle Probe

  • ...uration. The TL2-A is two thermometers in one instrument, with two channels allowing simultaneous temperature measurement in different locations. The TL2-A is well suited for establishing temperature traceability in equipment that requires high accuracy. The TL2-A is also perfect for metrology applications and as a calibration reference thermometer..
  • The TL2-A can be ordered with sensors included or the user can provide their own sensors. Sensor coefficients can be entered from a PC making it easy to change from a daily use RTD to a SPRT including user selectable choice of ITS-90 or Callandar-Van Dusen equations. Units come with 5 point resistance calibration from 20 to 425 ohms. With available PRT(s) ThermoProbe can provide a temperature reference system. Standard sensors are 100Ω wire-wound platinum RTDs in a stainless steel ¼” sheath 13.
  • The intuitive user interface allows easy configuration of temperature units, display resolution and a relay output. Minimum, maximum and average temperatures are automatically stored to memory for later reference. The interface allows viewing of Highest, Lowest and Average Readings, Zero Offset adjustment for sensor drift and readings in C, F, K and Ohms. The versatile data logging feature can be used to s....
Check Stock

Bonvoisin Lab Scale 1000gx0.01g Digital Precision Analytical Balance 10mg High Precision Electronic Balance Jewelry Scale Kitchen Scale Scientific Scale Laboratory Scale Balance (1000gx0.01g)

  • 0.01g Accuracy, Fast Response-To ensure to get the results quickly and accurately, the precision scale is equipped with an upgraded high-sensitivity build-in sensor, adjustable feet, level bubble overload alarm, error indication, and external calibration. Non-slip mat design makes this lab balance suits different weighing environment better..
  • Multi-Functions-Featuring of large LCD display, the lab scale can get the clear and precise results in seconds. Unit can be converted from g, kg, ct, oz, ozt, lb, dwt, %, tol, mm by simply pressing the “UNIT" button. This analytical balance also features of tare, auto-correct, memory, counting, fault visualization function, which can fulfill your different needs..
  • Material-The digital scale is made up of a 180x140mm large stainless steel weighing pan, durable ABS shell and strong strain gauge sensor, which has already been calibrated and tested by our professional technical team before shipment..
  • Easy Operation-The "PCS" function helps you count parts such as pins, screws, coins and etc.
  • The "UNIT" function enables you to change units directly.
  • "CAL" function for calibration and "TARE/ZERO" function for peeling..
  • Quality Guarantee-You are always welcomed to contact us if any problem of the scale or charger oc....
Check Stock

Bonvoisin Lab Scale 5000gx0.01g Digital Precision Analytical Balance 10mg High Precision Electronic Balance Jewelry Scale Kitchen Scale Scientific Scale Laboratory Scale Balance (5000gx0.01g)

  • 0.01g Accuracy, Fast Response-To ensure to get the results quickly and accurately, the precision scale is equipped with an upgraded high-sensitivity build-in sensor, adjustable feet, level bubble overload alarm, error indication, and external calibration. Non-slip mat design makes this lab balance suits different weighing environment better..
  • Multi-Functions-Featuring of large LCD display, the lab scale can get the clear and precise results in seconds. Unit can be converted from g, kg, ct, oz, ozt, lb, dwt, %, tol, mm by simply pressing the “UNIT" button. This analytical balance also features of tare, auto-correct, memory, counting, fault visualization function, which can fulfill your different needs..
  • Material-The digital scale is made up of a 180x140mm large stainless steel weighing pan, durable ABS shell and strong strain gauge sensor, which has already been calibrated and tested by our professional technical team before shipment..
  • Easy Operation-The "PCS" function helps you count parts such as pins, screws, coins and etc.
  • The "UNIT" function enables you to change units directly.
  • "CAL" function for calibration and "TARE/ZERO" function for peeling..
  • Quality Guarantee-You are always welcomed to contact us if any problem of the scale or charger oc....
Check Stock

AT4516 16 Channel Digital Thermometer High Temperature Data Logger Temperature Chart Recorder

  • ...uration. The TL2-A is two thermometers in one instrument, with two channels allowing simultaneous temperature measurement in different locations. The TL2-A is well suited for establishing temperature traceability in equipment that requires high accuracy. The TL2-A is also perfect for metrology applications and as a calibration reference thermometer..
  • The TL2-A can be ordered with sensors included or the user can provide their own sensors. Sensor coefficients can be entered from a PC making it easy to change from a daily use RTD to a SPRT including user selectable choice of ITS-90 or Callandar-Van Dusen equations. Units come with 5 point resistance calibration from 20 to 425 ohms. With available PRT(s) ThermoProbe can provide a temperature reference system. Standard sensors are 100Ω wire-wound platinum RTDs in a stainless steel ¼” sheath 13.
  • The intuitive user interface allows easy configuration of temperature units, display resolution and a relay output. Minimum, maximum and average temperatures are automatically stored to memory for later reference. The interface allows viewing of Highest, Lowest and Average Readings, Zero Offset adjustment for sensor drift and readings in C, F, K and Ohms. The versatile data logging feature can be used to s....
Check Stock

Traceable Memory-Loc Dual Zone Temperature Monitoring & Data Logger Kit (TM-6441)

  • ...uration. The TL2-A is two thermometers in one instrument, with two channels allowing simultaneous temperature measurement in different locations. The TL2-A is well suited for establishing temperature traceability in equipment that requires high accuracy. The TL2-A is also perfect for metrology applications and as a calibration reference thermometer..
  • The TL2-A can be ordered with sensors included or the user can provide their own sensors. Sensor coefficients can be entered from a PC making it easy to change from a daily use RTD to a SPRT including user selectable choice of ITS-90 or Callandar-Van Dusen equations. Units come with 5 point resistance calibration from 20 to 425 ohms. With available PRT(s) ThermoProbe can provide a temperature reference system. Standard sensors are 100Ω wire-wound platinum RTDs in a stainless steel ¼” sheath 13.
  • The intuitive user interface allows easy configuration of temperature units, display resolution and a relay output. Minimum, maximum and average temperatures are automatically stored to memory for later reference. The interface allows viewing of Highest, Lowest and Average Readings, Zero Offset adjustment for sensor drift and readings in C, F, K and Ohms. The versatile data logging feature can be used to s....
Check Stock

The Darkroom Cookbook (Alternative Process Photography)

  • ...peed compared to the last model. The bundled software- SilverFast 9 included over 100 functions that have additional improvement. The mechanism and powerful software make PlustekOpticFilm 8300i Ai becomes the best film digitize equipment..
  • [Advanced IT 8 Targets Included] OpticFilm 8300i bundled with 3-slide of 35mm Calibration Target (99 USD), this advanced standard IT8 target (ISO 12641-2 compliant 2019) gives more measuring point to ensure less interpolation while performing scanner color calibration..
  • [Dual Professional Software Included] The 8300i Ai bundled with world's digital imaging software- SilverFast 9 Ai studio and Plustek Quick Scan Plus, easier to digitizeand archive of your own slide and films with well-designed hardware feature and advanced image processing..
  • [New Algorithms] SilverFast 9 with new algorithms eliminated the boundaries of film and digital image.
  • successfully optimized the image result by built-in infrared, iSRD, HDRi, 16-bit Histogram, Multi-Exposure or NegaFix..
  • [Support Windows 7/8/10/11 and Mac OS. USB flash drive included. User can easily install and start using it without optical disc drive. Plustek also provided US-based expert services via phone or online support..
Check Stock

17 Pieces Gram Calibration Weight Set, 10mg-100g Precision 45# Steel Balance Scale Calibration Weight Kit with Tweezers for Digital Jewellery Scale Lab Educational Science Weights

  • ★★★★★【High precision】Permissible Error +/- 0.003g.
  • ★★★★★【Total Weight】Total Set of Weights:211.1g.
  • ★★★★★【Application Range】Suitable for Digital Jewellery Scale, General Laboratory, Commercial, and Educational.
  • ★★★★★【What you Get】1 x Plastic Storage Case.
  • ★★★★★【Quality Service】1 YEARS WARRANTY,If you have any technical questions, please contact us and we will give you a detailed answer as soon as possible..
Check Stock

YINMIK pH Meter with Flat Surface Electrode to Measure pH of Liquids Semi-Solids e.g. Hydroponic Nutrient, Wort in Beer Brewing, Lotions and Creams Cosmetic, Durable Tester with Protective Sensor Cap

  • ...INMIK flat probe pH tester resists breaking and prevents junctions from becoming clogged, which is easy to use and convenient for cleaning. In addition, attributed to the flat surface electrode, this pH meter performs excellently when measuring pH of small volume samples..
  • [Easy to Calibrate] Supporting 3-point auto calibration, following the instruction manual can easily achieve 4.00, 7.00, 10.01 auto calibration. Don't worry about the calibration solution, you can easily configure up to 500ml of calibration solution for each standard using the calibration powder included in the package. In addition, you can also purchase calibration powder from the YINMIK store on Amazon at an affordable price..
  • [Long life span] The protective cap of the tester contains a wet sponge soaked in KCL solution, making the probe always moist, and that gives the tester more durable life. This design avoids the problem of most other products where the electrode is directly exposed to air, thus causing the reference electrode to dry out and the pH tester to fail to read accurate values..
  • [User-friendly Design] The long electrode design can measure the pH value of solutions in deep containers, which is very convenient in hydroponics, laboratory, fermented food preparation,....
Check Stock

ThermoProbe TL2-A Precision Bench-top Laboratory Reference Thermometer – Dual Channel & USB Data Logger

  • ...uration. The TL2-A is two thermometers in one instrument, with two channels allowing simultaneous temperature measurement in different locations. The TL2-A is well suited for establishing temperature traceability in equipment that requires high accuracy. The TL2-A is also perfect for metrology applications and as a calibration reference thermometer..
  • The TL2-A can be ordered with sensors included or the user can provide their own sensors. Sensor coefficients can be entered from a PC making it easy to change from a daily use RTD to a SPRT including user selectable choice of ITS-90 or Callandar-Van Dusen equations. Units come with 5 point resistance calibration from 20 to 425 ohms. With available PRT(s) ThermoProbe can provide a temperature reference system. Standard sensors are 100Ω wire-wound platinum RTDs in a stainless steel ¼” sheath 13.
  • The intuitive user interface allows easy configuration of temperature units, display resolution and a relay output. Minimum, maximum and average temperatures are automatically stored to memory for later reference. The interface allows viewing of Highest, Lowest and Average Readings, Zero Offset adjustment for sensor drift and readings in C, F, K and Ohms. The versatile data logging feature can be used to s....
Check Stock

ThermoProbe TL2-A Precision Bench-top Laboratory Reference Thermometer – Dual Channel & USB Data Logger

  • ...uration. The TL2-A is two thermometers in one instrument, with two channels allowing simultaneous temperature measurement in different locations. The TL2-A is well suited for establishing temperature traceability in equipment that requires high accuracy. The TL2-A is also perfect for metrology applications and as a calibration reference thermometer..
  • The TL2-A can be ordered with sensors included or the user can provide their own sensors. Sensor coefficients can be entered from a PC making it easy to change from a daily use RTD to a SPRT including user selectable choice of ITS-90 or Callandar-Van Dusen equations. Units come with 5 point resistance calibration from 20 to 425 ohms. With available PRT(s) ThermoProbe can provide a temperature reference system. Standard sensors are 100Ω wire-wound platinum RTDs in a stainless steel ¼” sheath 13.
  • The intuitive user interface allows easy configuration of temperature units, display resolution and a relay output. Minimum, maximum and average temperatures are automatically stored to memory for later reference. The interface allows viewing of Highest, Lowest and Average Readings, Zero Offset adjustment for sensor drift and readings in C, F, K and Ohms. The versatile data logging feature can be used to s....
Check Stock

marddpair 6 Pcs 0-6 Outside Micrometer 0.0001 Carbide Standards Micrometers

  • Complete with calibration standards and wrenches.
  • Micrometer Ranges: 0-1, 1-2, 2-3, 3-4, 4-5 And 5-6.
  • Crisp, clear, easy-to-read graduation, accurate to 0.0001.
  • Hardened and ground spindle with carbide anvil ensure durability and accuracy.
  • Ratchet handle for precise application of force.
  • Includes adjustment wrench and calibration standards.
Check Stock