Top Cam Lock Air Hose Fittings
EVIL ENERGY 6AN to 3/8 Barb Push Lock Hose End Fitting 45 Degree Blue&Red 2PCS
- 6AN female swivel to 3/8 barb fitting 45 Degree.
- Please attention that AN6 push lock fitting only be worked with rubber fuel line. It can not be installed on PTFE Hose, Nylon Braided Hose, or....
- Thread Size of 6an 45 Degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should be 3/8"..
- Push on locking fittings are much more easier on installation than swivel and PTFE fittings. (high-pressure system not recommended).
- EVIL ENERGY Provide plenty kind of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..
Check Stock
DAVCO 2' x 100 ft Pool Backwash Hose, Heavy Duty Reinforced Blue PVC Lay Flat Water Discharge Pump Hoses For Swimming Drain Pools and Clean Filters,with 1 Clamp
- The pool backwash hose is made of PVC and reinforced with polyester yarn, can withstand 90 psi working pressure during water supply and drainage, heavy-duty, superior strength, economical, durable, leak-free and weather, chemical, and burst resistant..
- Backwash hose is standard 2 inch hose, flat 3.4’’ wide, fit 2’’ standard size filter outlet or cam lock / pin lug fittings, and fit 1.5’’ or less size schedule 40/80 PVC pipe. Be sure to measure your filter outlet to ensure proper fit before ordering..
- The discharge hose is essential swimming pool supplies, works as pool drain hose, pool pump hose, filter waste hose, also works for agricultural water discharge, irrigation, landscaping, construction dewatering and submersible pumping..
- The pool hose is made to fit standard connections to backwash pool filtration systems , and you can easily install it with clamp. After use, just roll it up and hardly take up any space, and then store it in a dry place for next use, away from direct sunlight..
- Unlike traditional paper-thin single layer pool backwash hose, it can be used multiple times and withstand rough handling. If you want a drain hose that will last, this is what you are looking for!.
Check Stock
Milwaukee M18GG-0 M18 Cordless Grease Gun
- 20V BATTERY OPERATED GREASE GUN - 10,000 PSI Max power grease gun powers through the toughest grease fittings. The 20 volt battery powered grease gun is suitable for agricultural, construction, automotive, general maintenance, and industrial applications..
- PORTABLE RECHARGEABLE GREASE GUN - Our cordless grease guns go where pneumatic grease guns and corded electric grease guns can't. Ideal for mobile workshops, farm use, and emergency maintenance on the road..
- VARIABLE SPEED PUMP - Adjust the grease flow up to 10 oz/minute for heavy duty applications or dial it down for smaller jobs with delicate fittings. It's a small grease gun that can handle jobs big and small..
- FULL FEATURES - 30 inch flexible hose for hard to reach fittings, replaceable coupler for longer life with grease gun attachment clips on both sides, on/off trigger lock, easy to use air-bleeder valve, and an LED work light for great visibility..
- BATTERY POWERED GREASE GUN KIT - Complete electric grease gun kit includes electric grease gun with battery and charger: electric greaser gun, 20 volt rechargeable battery, charger, 30" flexible hose, and grease gun coupler..
Check Stock
Utah Pneumatic Plastic Push To Connect Fittings Tube 10 Pack 1/4\ Od Straight Push Fit Fittings Tube Fittings Push Lock Hose Union (1/4\ Straight)
- utah pneumatic Push to Connect fittings: air and water Pressure Range: 0-1 Mpa145 psi Max pressure:1.5 Mpa/ 217 psi/15 bar Temperature Range 0-60°C | 32～140°F Applicable Tube: PU/NYLON/Soft PE hose fittings.
- Easy to install This tube connector is available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly.
- You can easily change the tubing connector direction even after installation. The release ring of conforms with the ellipse design to ensure that the disconnecting of connect push is in good shape.
- All push to lock contains internal hexagonal holes this enhances the installation process in a narrow space push connect fittings Can be dismantled and assembled easily These Push In Fittings Meet The Pressures And Temperatures Mentioned.
- At Extreme Temperatures In Places Close To Heat Sources we Would Recommend Our Brass push connectors Which Is More Resistant To High Temperatures We Are Ready To Answer Any Questions Related To Our Connect It Fittings.
Check StockMilwaukee 2646-20 M18 2-Spd Grease Gun Bare Tool
- Industry leading 10,000 PSI max operating pressure.
- 48" flexible hose offers greater access to difficult to reach fittings.
- Lock-on / Lock-off trigger delivers added user convenience.
- New to world precision through Pre-set grease counter dial.
Check Stock
Draft Brewer New 5 Gallon Stainless Steel Ball Lock Keg
- 【MFL QUICK DISCONNECT】MRbrew threaded beer cornelius keg ball lock disconnect fittings come with MFL swivel nuts, make hose changing and extra equipment adding a breeze, allow more options of extra functions and possibilities for your kegging system!.
- 【BUY ACCESSORIES SEPARATELY? NO!】MRbrew ball lock fittings comes with complete sealing and hose connection parts, 5/16” barb for connecting gray disconnect to gas hose, 1/4” barb for connecting black disconnect to liquid hose, clamps guarantee no leak on connection!.
- 【YOUR LONG-LASTING USE CHOICE】MRbrew ball lock fitting set is made of stable PBT material, it has strong oil resistance, its smooth surface makes cleaning easy. Stainless steel has strong corrosion resistance, not easy to get rust. MRbrew makes your beer brewing more economy!.
- 【POWERFUL APPLICATION KIT YOU NEED】MRbrew ball lock keg fitting is perfect for most Cornelius Keg, Pepsi Keg and 7-UP tanks, also can be a home brewing adapter of Corny & Keg coupler, suitable for beer, soda, and other beverages dispensing!.
- 【100% LIFELONG ISSUES SOLVING FOR YOU】Each MRbrew ball lock keg fitting set is backed by unbeatable, reliable, trusted product quality, we will unconditionally solve your problems if you are not satisfied!.
Check StockJACO FlowPro Digital Tire Inflator with Pressure Gauge - 200 PSI
- Performance tested & calibrated accurate to ANSI 1A standards (±1% full scale) with display resolution of 0.5 for max accuracy.
- Fully equipped with a solid steel body & rugged matte black powder coated finish, heavy duty 18 inch steel-braided air hose, precise "push-to-inflate"....
- Lightning Chuck - includes our all-new patented automatic lock-on Lightning Air Chuck w/ advanced locking mechanism & rapid quick-release valve - no....
- Complete airline tire inflation set - ready to attach inline to your air compressor hose with 1/4 inch NPT fittings - accessories include (1x)....
- 100% Lifetime Warranty by JACO when you order today - so click "Add to Cart" with confidence and take your garage or shop tire filling setup to the....
Check Stock
Lincoln AC2440 120V Electric Corded Grease Gun, Multi-color, 30 Inch
- 20V BATTERY OPERATED GREASE GUN - 10,000 PSI Max power grease gun powers through the toughest grease fittings. The 20 volt battery powered grease gun is suitable for agricultural, construction, automotive, general maintenance, and industrial applications..
- PORTABLE RECHARGEABLE GREASE GUN - Our cordless grease guns go where pneumatic grease guns and corded electric grease guns can't. Ideal for mobile workshops, farm use, and emergency maintenance on the road..
- VARIABLE SPEED PUMP - Adjust the grease flow up to 10 oz/minute for heavy duty applications or dial it down for smaller jobs with delicate fittings. It's a small grease gun that can handle jobs big and small..
- FULL FEATURES - 30 inch flexible hose for hard to reach fittings, replaceable coupler for longer life with grease gun attachment clips on both sides, on/off trigger lock, easy to use air-bleeder valve, and an LED work light for great visibility..
- BATTERY POWERED GREASE GUN KIT - Complete electric grease gun kit includes electric grease gun with battery and charger: electric greaser gun, 20 volt rechargeable battery, charger, 30" flexible hose, and grease gun coupler..
Check StockBrass 1/4 Barb X 1/4 NPT Male End Air Hose Pipe Fitting Threaded Connector Adapter Pack of 12
- ✅ Function -- Barb head for connecting hoses, NPT end used to connect NPT pipes. Air hose pipe can apply to water, gas, oil and fuel as well as air tools..
- ✅ Premium material -- Brass barbed hose fitting is made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion. Solid brass hose barb can withstand up to 100 °C (212 °F)..
- ✅ Durable -- Air hose fittings is not a cast product and has a thick wall, providing a longer service life than iron and iron galvanized pipe fittings..
- ✅ Superior threads -- Deeper and smoother threads with barbed edges provide effective connection..
- ✅ CUSTOMER SERVICE -- Professional factories produce brass air line fittings. Every detail reflects a strong texture performance. Fast Delivery and 30 Days Free Refund..
Check Stock
F-AL-3/8, 3/8″ Threaded Female Tank Filter for Mosquito Misting Systems
- {Made in USA Pump & Tubing} Mid Pressure Patio Misting Kit complete with 200PSI Booster Pump, Cleanable Brass/Stainless Steel Misting Nozzles, UV treated flexible tubing, and push lock fittings. Easy to install..
- {Pump Specifications} 110 Volt Kit Includes: – 200PSI Booster Pump with Plug (110v) – 50ft Flexible Tubing – Calcium Inhibitor Filter – 12 Brass/Stainless Steel Mist Orifice Nozzles – 0.012” – 11 – Push Lock Mist Tees – 1 – Push Lock End Mist Elbow – 6ft Feed line with 3/4 Garden hose connector – Plastic Clamps.
- {Installation} – Push Lock Fittings – Easy Connect -Whisper Quiet Operation Easy to hook with any garden hose Max Water pressure 200 PSI Supports up to 20 Nozzles Wall Mountable Plugs in to standard 115V outlet (wall plug included on 110v models only).
- {Comes with Filter to protect your Nozzles} Booster Pump Features: Built-In Thermal Safety Switch Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4” Garden Hose Connecter Outlet Fitting: 1/4” and/or 3/8” Push Lock.
- {Easy to Expand} Booster Pump Features: Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4” Garden Hose Connecter Outlet Fitting: 1/4” and/o....
Check StockKegco Keg Tap Coupler, 1
- The Kegco KT85-MFL Lever Handle D System Keg Tap is the perfect coupler for anyone who wants to easily switch back and forth from domestic to home brew kegs.
- This keg tap has a nickel-plated forged brass body and features a stainless steel probe and a black lever handle.
- Coupler comes equipped with 1/4" MFL fittings for both the gas in and liquid out posts, so you no longer have to worry about pulling a hose off of a hose nipple or removing clamps if you want to use a different kind of coupler.
- This D system keg coupler is easy to use - simply unscrew the nut from the fitting and screw it onto comparable ball lock or pin lock couplers.
- Please Note: Beer Line requires a 1/4" Swivel Nut Set and Air Line requires a 3/8" Swivel Nut Set.
Check StockJACO CobraFlow Polyurethane Coiled Air Hose Kit - 1/4 x 30 ft | with Air Compressor Fittings Storm Gray
- Superior Workability - engineered with our flexible, lightweight, & durable polyurethane coiled tubing that stays kink-free and uncoils from 1.5 ft....
- Flexible & Lightweight - stronger & more flexible than PVC and plastic air hoses, and more lightweight & portable than rubber and hybrid air hoses -....
- 1/4" Air Hose Fittings - quick-connect to your air tools & accessories with our included air fittings kit that includes a universal quick connect....
- Quality Storage Bag - using an air hose shouldn't be frustrating. Our poly air hose is easy to move around, and will effortlessly uncoil to any length....
- Lifetime Warranty - upgrade your air compressor tools & accessories setup with the CobraFlow Recoil Air Hose Kit by JACO. Approved for indoor and....
Check Stock
