Top Cam Lock Fire Hose Fittings

EVIL ENERGY 6AN to 3/8 Barb Push Lock Hose End Fitting 45 Degree Blue&Red 2PCS

  • 6AN female swivel to 3/8 barb fitting 45 Degree.
  • Please attention that AN6 push lock fitting only be worked with rubber fuel line. It can not be installed on PTFE Hose, Nylon Braided Hose, or....
  • Thread Size of 6an 45 Degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should be 3/8"..
  • Push on locking fittings are much more easier on installation than swivel and PTFE fittings. (high-pressure system not recommended).
  • EVIL ENERGY Provide plenty kind of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..
Check Stock

DAVCO 2' x 100 ft Pool Backwash Hose, Heavy Duty Reinforced Blue PVC Lay Flat Water Discharge Pump Hoses For Swimming Drain Pools and Clean Filters,with 1 Clamp

  • The pool backwash hose is made of PVC and reinforced with polyester yarn, can withstand 90 psi working pressure during water supply and drainage, heavy-duty, superior strength, economical, durable, leak-free and weather, chemical, and burst resistant..
  • Backwash hose is standard 2 inch hose, flat 3.4’’ wide, fit 2’’ standard size filter outlet or cam lock / pin lug fittings, and fit 1.5’’ or less size schedule 40/80 PVC pipe. Be sure to measure your filter outlet to ensure proper fit before ordering..
  • The discharge hose is essential swimming pool supplies, works as pool drain hose, pool pump hose, filter waste hose, also works for agricultural water discharge, irrigation, landscaping, construction dewatering and submersible pumping..
  • The pool hose is made to fit standard connections to backwash pool filtration systems , and you can easily install it with clamp. After use, just roll it up and hardly take up any space, and then store it in a dry place for next use, away from direct sunlight..
  • Unlike traditional paper-thin single layer pool backwash hose, it can be used multiple times and withstand rough handling. If you want a drain hose that will last, this is what you are looking for!.
Check Stock

Draft Brewer New 5 Gallon Stainless Steel Ball Lock Keg

  • 【MFL QUICK DISCONNECT】MRbrew threaded beer cornelius keg ball lock disconnect fittings come with MFL swivel nuts, make hose changing and extra equipment adding a breeze, allow more options of extra functions and possibilities for your kegging system!.
  • 【BUY ACCESSORIES SEPARATELY? NO!】MRbrew ball lock fittings comes with complete sealing and hose connection parts, 5/16” barb for connecting gray disconnect to gas hose, 1/4” barb for connecting black disconnect to liquid hose, clamps guarantee no leak on connection!.
  • 【YOUR LONG-LASTING USE CHOICE】MRbrew ball lock fitting set is made of stable PBT material, it has strong oil resistance, its smooth surface makes cleaning easy. Stainless steel has strong corrosion resistance, not easy to get rust. MRbrew makes your beer brewing more economy!.
  • 【POWERFUL APPLICATION KIT YOU NEED】MRbrew ball lock keg fitting is perfect for most Cornelius Keg, Pepsi Keg and 7-UP tanks, also can be a home brewing adapter of Corny & Keg coupler, suitable for beer, soda, and other beverages dispensing!.
  • 【100% LIFELONG ISSUES SOLVING FOR YOU】Each MRbrew ball lock keg fitting set is backed by unbeatable, reliable, trusted product quality, we will unconditionally solve your problems if you are not satisfied!.
Check Stock

EXCELFU LP Propane Gas Fire Pit Stainless Steel Burner Ring Installation Kit, 12 inch

  • Fire Pit Burner Ring: 12 inch round fire ring with 1/2 inch female gas inlet, rated for up to 150,000 BTUs. Made of durable #304 stainless steel for maximum rust resistance and long lifespan..
  • Stylish Design: New cross-bar design for better gas distribution and made your fire pit enjoyable..
  • Safety&Secure Connection: Fiber reinforced propane hose with solid brass fittings for corrosion resistance, ductility at high temperatures and prodive airtight sealing..
  • Easy Installation: CSA Certified 5 feet connect hose and 5 feet propane hose with type-1 (QCC-1) propane tank connections. Long extension hose meet your needs for fire pit installation..
  • Buy with Confidence: Every propane fire pit kit is backed by 18-month warranty. If you are not satisfied with your purchase, just contact with us and our Customer Service Team will help you..
Check Stock

F-AL-3/8, 3/8″ Threaded Female Tank Filter for Mosquito Misting Systems

  • {Made in USA Pump & Tubing} Mid Pressure Patio Misting Kit complete with 200PSI Booster Pump, Cleanable Brass/Stainless Steel Misting Nozzles, UV treated flexible tubing, and push lock fittings. Easy to install..
  • {Pump Specifications} 110 Volt Kit Includes: – 200PSI Booster Pump with Plug (110v) – 50ft Flexible Tubing – Calcium Inhibitor Filter – 12 Brass/Stainless Steel Mist Orifice Nozzles – 0.012” – 11 – Push Lock Mist Tees – 1 – Push Lock End Mist Elbow – 6ft Feed line with 3/4 Garden hose connector – Plastic Clamps.
  • {Installation} – Push Lock Fittings – Easy Connect -Whisper Quiet Operation Easy to hook with any garden hose Max Water pressure 200 PSI Supports up to 20 Nozzles Wall Mountable Plugs in to standard 115V outlet (wall plug included on 110v models only).
  • {Comes with Filter to protect your Nozzles} Booster Pump Features: Built-In Thermal Safety Switch Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4” Garden Hose Connecter Outlet Fitting: 1/4” and/or 3/8” Push Lock.
  • {Easy to Expand} Booster Pump Features: Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4” Garden Hose Connecter Outlet Fitting: 1/4” and/o....
Check Stock

SpringSpray 1-1/2\ NPT Male x 1-1/2\ NST (NH) Male Brass Hexagonal Nipple Fitting Fire Equipment Hex Nipple Doule Male Fire Hose Adapter

  • ...UE DESIGN】- With hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench. Hex tube fitting as a short length of pipe with threaded ends for connecting threaded pipes.
  • ⚒【WIDE APPLICATION】- Male to male adapters are used to bridge two female hose, pipe or valve fittings. Suitable for use in general firefighting applications. Brass fire hydrant adapter fittings are used for connecting fire hose, PVC pipe, and other low-pressure pipes in the fire brigade, industry, refinery, building industry, agriculture, shipping, military, and civil protection.
  • ⚒【100% SATISFACTION SERVICE】-We have a professional product development team. If you have any questions about compatibility or any dissatisfaction, please feel free to contact us and we will help you solve it perfectly.
Check Stock

Fuel Line Kit 3/8\ 6AN 20FT Fuel Hose Nylon Stainless Braided CPE Oil Fuel Injection Line Fitting Kit Universal

  • 20Ft Fuel Injection line with 6AN fittings: The package includes 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree) and 3/8 braided fuel line. All the an fittings feature a reusable spin-lock connector.
  • Universal Application: The AN6 nylon braided fuel hose can be worked with coolant, diesel, oil, hydraulic fluid, pump gas, air, and fuel. This braided fuel line mostly used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, transmission system and oil cooler kit, etc. Easily enough line here to run all the way from your fuel tank to the engine.
  • Excellent Flexibility and Durability: The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
  • The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength.
  • Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
  • No Worry To Buy: Excellently Sealed, no leaking. We of....
Check Stock

NOVINO Fire Hose Nozzle,2 inch NPSH Heavy-Duty Industrial Fire Hose Constant Flow Fog Nozzle with 2pcs 2" Aluminum Camlock Fitting Coupling Fire Equipment

  • Premium Quality Thermoplastic 2 inch NPSH thread fire hose nozzle attached to 2 x 2 inch NPSH threads female / male camlock. The stem of fire nozzle is made by brass and the camlock fittings is made by aluminum to make sure corrosion resistance and durable.
  • Fit for:The 2 inch NPSH fire hose nozzle is only for standard 2"inch NPSH/NPT thread hose ,NOT for NH/NST thread. Female 2" NPSH will only connect to a male 2" NPSH/NPT.
  • Use for: The 2 inch fire hose nozzle works great for fire hose and fire hose racks for lined&unlined fire hose. Spraying large consistent volumes water on fire fighter fireman station for extinguishing fires , also green house applications to put out fires,evaporate cooling,dust suppression,watering for green house,garden,yard,orchard when you need high volume water output.
  • Adjustable spray size: By rotating the industrial constant flow fog nozzle to control on and off and adjust spray size (straight stream and conical fog).
  • Maximum 100 psi water operating pressure,≈60 GPM gallons per minute(about), ≈70 feet distance,NPSH:National Pipe Str....
Check Stock

Residential Misting System- Made in USA Pump- 200 psi Mid Pressure Patio Misting System-12 Nozzles Misting System

  • {Made in USA Pump & Tubing} Mid Pressure Patio Misting Kit complete with 200PSI Booster Pump, Cleanable Brass/Stainless Steel Misting Nozzles, UV treated flexible tubing, and push lock fittings. Easy to install..
  • {Pump Specifications} 110 Volt Kit Includes: - 200PSI Booster Pump with Plug (110v) - 50ft Flexible Tubing – Calcium Inhibitor Filter - 12 Brass/Stainless Steel Mist Orifice Nozzles - 0.012'' - 11 - Push Lock Mist Tees - 1 - Push Lock End Mist Elbow - 6ft Feed line with 3/4 Garden hose connector - Plastic Clamps.
  • {Installation} - Push Lock Fittings - Easy Connect -Whisper Quiet Operation Easy to hook with any garden hose Max Water pressure 200 PSI Supports up to 20 Nozzles Wall Mountable Plugs in to standard 115V outlet (wall plug included on 110v models only).
  • {Comes with Filter to protect your Nozzles} Booster Pump Features: Built-In Thermal Safety Switch Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4'' Garden Hose Connecter Outlet Fitting: 1/4'' and/or 3/8'' Push Lock.
  • {Easy to Expand} Booster Pump Features: Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4'' Garden Hose Connecter Outlet Fitting: 1/4'' and/or 3/8'' Push Lock. MC12020.
Check Stock

80FT + 6.5FT Retractable Air Hose Reel, Wall Mount Penumatic Hose Reel for Garage Workshop, Automatic Rewind, 3/8" x 80' Hybrid Air Hose with Brass Fittings + Bend Restrictors, 300PSI

  • ...pull to activate it and the 3rd pull to lock the air hose again! This greatly extend the reel's time of service, far better than other air hose reels in the market!.
  • 【Specifics】Size: 20x7.5x16.5 inch(L x W x H). Air Hose material: (PVC+ Rubber)Hybrid, Hosebox: PP, Fittings: solid brass, Retractable Air Hose: 80FT, Leader Hose: 6.5FT. Hose Diameter: 3/8", quick coupler: 1/4" NPT. Maxi Working Pressure: 300 PSI. It is ideal for use in any garage, wood shop, workshop and home!.
  • 【Self-Leveling】This air hose reel is equipped with a self-leveling system, enabling the air hose to wind smoothly, easily and evenly. You can mount it on a wall, it allows 180 degree free rotation for easy to use in any corner of your garage..
  • 【Easy to Use】1)Solid brass ¼ inch NPT fittings (which never corrode) for easy and quick to connect your air compressor and penumatic tool! 2)Bend restrictors to offer you ease of use and hose protection. 3)Adjustable stopper for more flexible use of the hose left out of the hose reel..
Check Stock

Aluminum Cam and Groove Hose Fitting Type DD 2 with Spool Coupler with 1 PCS Camlock Gasket Fitting 2“ DD

  • Straight body with two openings for connecting two hoses or pipes with cam and groove fittings.
  • Female cam coupler at either end for connecting to male groove adapters.
  • Aluminum for resisting corrosion and tarnishing.
  • Cam lock levers for locking the fitting's male groove adapter into female cam couplers.
  • Nitrile butadiene rubber seal rated for petroleum service, ethanol to E100, and biodiesel to B20.
Check Stock

Iococee 275/330 Gallon IBC Tote Drain Adapter 2 inch cam lock, convert 2 inch to a 1 inch,Garden Hose Food Grade Connection

  • FOOD GRADE:This 2 inch cam lock is most suitable for drinking water and other edible products..
  • SERVICE:No matter what the reason, as long as you have questions or dissatisfaction,we will provide you with 100% replacement or refund service.Happy shopping！Happy life!.
  • MATERIAL:The 2 inch cam lock are made of strong polypropylene.Our products are more resistant to acidic water and chemical corrosion than brass materials.Greatly increase the service life of the product..
  • LARGE SILICONE GASKET:The 2 inch cam lock has a built-in large silicone gasket, which effectively prevents liquid leakage..
  • USE:This 2 inch cam lock is mostly found in IBC tote containers.Our product will convert 2 inch male camlock fitting to a 1 inch garden hose fitting.Solve your worries easily！.
Check Stock