Top Camera Cage Accessories
MAGICRIG Camera Cage Kit Compatible with BMPCC 6K Pro & 6K G2 for Blackmagic Pocket Cinema Camera 6K Pro & 6K G2
- ...the bottom to prevent wiggles, and comes with rubber pad at the bottom to protect the camera from scratching..
- 【Multiple mounting points】The MAGICRIG cage with abundance of 1/4’’ and 3/8'' thread holes and several ARRI-style mounts for mounting additional accessories, such as ball head, rod clamp, magic arm, handle, etc..
- 【Full accessibility】The cage would not block any buttons on the camera and you are able to access not only the battery but even the audio slot, USB-port, HDMI-port..
- 【Top Handle】This handle can be fixed on the top or side of the camera cage with 2pcs 1/4'' screws. This handle comes with an allen wrench on the side, which attaches via magnet inside the handle. You can use it for different purposes, you can loosen those screws on the other side and can change front to back orientation according to your need..
- 【T5 SSD Holder & Cable Clamp】The T5 holder is fixed to the cage by cold shoe, securing the T5 SSD and protecting the USB-C cable. The cable clamp attaches to the side of the cage with one 1/4”-20 screw, securing bot....
Check StockTiltaing Camera Cage for BMPCC 6K Pro Basic Kit TA-T11-B-B Blackmagic Pocket Cinema Camera Rig (Basic Kit Black)
- [PROTECTIVE ARMOR] for BMPCC 6K Pro Minimizes Wear and Tear Over Time.Arm your camera with the Tiltaing Camera Cage for the Blackmagic Pocket Cinema Camera 6K Pro. [MOUNT ACCESSORIES] via NATO Rail, Arri Compatible Rosettes, Cold Shoe Receivers, 1/4"-20 Threads with Locating Pins..
- [QUICK RELEASE TOP HANDLE] Provides More Flexibility When Operating and Handling.The included Quick Release Top Handle can be attached to the top of the cage via a cold shoe receiver and ¼”-20 screw. This provides an extremely secure connection to comfortably handle and operate your camera system..
- The Top Handle features additional ¼”-20 threads, cold shoe receivers and a horizontal 15mm rod holder for mounting external monitors or EVFs..
- [RECORD TO SSD] via the T7 Drive Holder and Mountable USB-C Cable.The SSD Drive Holder attaches directly to the Cage via a 1/4″-20 screw and locating pin. It can then clamp onto a T7 SSD drive, securing it to your camera setup and allowing you to record footage onto a separate SSD card. The included USB-C cable is able to screw into the SSD Holder and the Side Panel of the Cage near the USB-C Port.....
Check StockSmallRig Cage with Silicone Handgrip & Cold Shoe for Sony a6100, a6300, a6400 - 3164
- 【FOR SONY A6400/A6300/A6100】The SmallRig Camera Cage 3164 is especially designed for Sony cameras a6400/a6300/a6100 with a removable, non-slip and soft silicone handgrip..
- 【MULTIPLE MOUNTING POINTS】The SmallRig Cage with Silicone Handle 3164 features two cold shoes, multiple 1/4"-20 threaded holes and ARRI 3/8"-16 locating holes for attaching the articulating arms, external monitors, microphones or other accessories..
- 【SECURE LOCK POINTS & PREVENT TWISTING】This aluminum alloy cage 3164 secures the camera via a 1/4"-20 screw, and a M2.5 screw on the side to prevent twisting. Plus, an optional HDMI Cable Clamp 1693 is separately available to protect the HDMI port..
- 【INTEGRATED PLATE FOR ARCA-STYLE】There is an integrated plate for Arca-Type on the cage bottom, and it allows you to mount quickly on a tripod of Arca standard..
- 【BUILT-IN SCREWDRIVER】A built-in screwdriver stores on the 3164 cage bottom for quick assembly and disassembly. Also, the mounting surface features rubber pads that hold your camera securely to prevent scratching..
Check StockNEEWER Camera Cage Compatible with Canon EOS R5 R6 SmallRig Aluminum Alloy DSLR Rig Stabilizer with 1/4 & 3/8 Threads Cold Shoe and NATO Rail for Vlogging Filmmaking Video Recording VS101
- 【Compact Camera Cage】 This aluminum alloy camera cage is a simple yet versatile platform for you to add accessories and capture stunning footage....
- 【Multiple Mounting Options】 With NATO accessory rail, cold shoe mount, strap slots, multiple 1/4"-20 and 3/8"-16 female threads, and ARRI-style....
- 【Wide Compatibility】 The T-shaped hex key is magnetically attached to the bottom of the cage for tightening screws. The cage also has a standard....
- 【Secure Mounting】 Built-in bottom 1/4”-20 screw with dual locating pins securely attaches your Canon EOS R5/R6 in the cage and the rubber pad....
- 【Solid Construction】 Made of CNC-milled aluminum alloy with a black anodized finish, the camera cage is durable, wear-resistant, and offers your....
Check StockMAGICRIG BMPCC 4K /6K Cage with NATO Handle + T5 SSD Card Mount Clamp for Blackmagic Pocket Cinema Camera BMPCC 4K /6K
- ...bottom, with additional locating pins and rubber pads on the base plate to prevent twisting..
- Multiple mounting interfaces. The cage is equipped with multiple 1/4'' and 3/8'' screw holes that can be used to install monitors, microphones, flash and other accessories..
- T5 SSD card holder. Two M5 knob screws are used to lock the T5 SSD and its USB-C cable. There are a variety of mounting options to give you more options. The mount can be mounted on the camera mount with two M4 screws or Two 1/4" screws..
- It consists of a cage with a NATO handle and a T5 card holder. This handle is equipped with the hole pattern for ARRI accessory mount pins, you can attach compatible extension blocks, also provides 1/4" & 3/8" mounting points for additional accessories .The handles are easy to transport and offer more convenience for low angle shooting..
Check StockSmallRig Cold Shoe Mount Adapter (2pcs Pack) with 1/4\-20 Thread for Camera Cage Flash LED Moniter - 2060
- SmallRig Cold Shoe (2pcs Pack) 2060 could be mounted on any camera accessories with 1/4" and M2.5 threaded holes, such as cage, cold shoe block, handle and plate etc. Such as cage for sony (a6500 a6300 a6500), cage for panasonic (gh5 gh4 gh3), etc..
- The counter bore hole in the center is attachable to a 1/4’’ screw, but the 1/4’’ screw will not touch the hot shoe contact of accessories mounted on the cold shoe..
- There comes with two secure bending bevels on the one end to prevent accidental removal.
- The arrowheads on the cold shoe show the direction to mount additional accessories..
- NOTE: This Cold Shoe Mount is NOT suitable for DJI gimbal and NOT for ZHIYUN as well. For using on a cage, except for SmallRig Full Cage1661, you only need to lock it on the cage via the included 1/4"-20 screw, the M2.5 threaded is unnecessary..
Check StockSmallRig Cage for Nikon Z5/Z6/Z7/Z6II/Z7II Camera 2926
- Compatibility: This formfitting camera cage is made for Nikon Z5/Z6/Z7/Z6II/Z7II. And compatible with the HDMI & USB clamp of ID 2927 to protect the HDMI & USB cable head..
- Key Functions: To ensure the comfort and safety of hand-held shooting, there are interfaces of the shoulder strap and wrist strap of the cage. Built-in cold shoe at the top of the cage makes it easy to install the microphone. And there is a built-in NATO Rail at the left side of the cage, it can be attached to Nato Clamp Handle 2187 for quickly switching..
- Multiple Mounting Interfaces: With multiple 1/4”-20 thread holes and 3/8”-16 location holes for Arri. Aim to attach accessories such as Magic Arm 2070, Top Handle 2165, Monitor Mount 2903, etc..
- Stable And Anti-twist: The cage will hold the camera tightly through a 1/4”-20 screw at the base and an M2.5 screw at the side. To keep the camera stable and no shaking..
- Lens Bayonet Protect: Two threaded holes are reserved at the bottom of the front end of the cage, which is compatible with the FTZ lens adapter ring 2244, to protect the bayonet of the lens..
Check StockSMALLRIG Camera Cage Kit for Blackmagic Design Pocket Cinema Camera 4K & 6K, Compatible with BMPCC 4K & 6K - KCVB2419
- ... 【FOR HANDHELD SHOOTING】This Top Handle from SmallRig features a shoe mount for microphone and LED lights, is designed for handheld shooting, can hold the weight of a large cage rig with various attachments with ease. The cage kit features a built-in Nato rail that allows you to quickly release accessories with NATO clamp. The handle attaches directly to the cage’s NATO rail on the top and is adjustable fore and aft.
- 【Mount for Samsung T5 SSD】The SSD holder is fixed to the cage by two screws, securing the T5 SSD and protecting the USB-C cable. This is a basic and light handheld kit for BMPCC 4K & 6K users.
- 【TOP RECOMMENDATION】When working with the camera field monitors, you could fix it to the top of cage kit 2419 with SMALLRIG Monitor Mount 1842.
Check StockCamera Cage Set ,with Matte Box ,for GH4 ,Compatible with Sony A7S/A7/A7R/A7RII/A7SII ,Professional Photography Accessories
- Includes: Aluminum Cage with Top Handle, Shoe Mount and 15mm Rods – Custom Fit for the Panasonic Lumix DMC-GH3 & GH4- Allows access to all camera functions and ports.
- Anodized Aluminum. Multi-Threaded Cage and Removable Top Handle. Rod Clamp with 15mm Rods for Mounting Follow Focus, Matte Box, etc..
- The form fitting camera cage allows full access to the camera’s controls, buttons, battery and SD card slot. The cold shoes, 1/4″ and 3/8″ mounting points allows you to mount different accessories..
- Quick release base plate allows you to easily remove and remount the camera to the rods. With 1/4″ and 3/8″ mounting points on the quick release plate, the cage can be easily mounted and removed from a tripod, rig or other device..
- The HDMI plug protector frees you from worrying about wearing out or damaging the micro HDMI port by repeatedly plugging or replugging a micro HDMI cable into your camera body..
Check StockSmallRig Camera Half Cage with Top Handle and HDMI Cable Clamp Kit for Sony a7S III - 3237
- For Sony a7S III: SmallRig Cage Kit 3237 enables you to add accessories and protection as well as a carrying option to your Sony a7S III mirrorless....
- Formfitting Half Cage: This durable aluminum a7SIII cage maintains access to the camera's controls, and rubber padding on the top, sides, and bottom....
- Numerous Mounting Options: The a7s III Cage Features a built-in cold shoe on top, as well as 1/4"-20 threads and a 3/8"-16 anti-twist locating hole....
- HDMI Cable Clamp: The cable clamp is designed to prevent the HDMI cable from pulling or accidentally disconnecting. It mounts onto the side of the....
- Top Handle for ARRI-Style Mount: The top handle uses a locking 3/8"-16 thumbscrew with locating pins to attach securely to your camera cage. In....
Check StockSmallRig Full Camera Cage for Sony Alpha 7R V / Alpha 7 IV / A7R IV / Alpha 7 S III / Alpha 1 - 3667B
- Improved Design: 1. A cold shoe is added to the upper right corner of the cage to facilitate the installation of accessories such as Microphone 3468 and LED Video light 3286.
- 2. Two 1/4"-20 threaded holes with a spacing of 18mm are added at the bottom, which is compatible with SmallRig Quick Release Plate for Arca 3154. A QD hole is added at the bottom, which is compatible with QD quick release shoulder straps and other accessories..
- For Sony A7R V/A7 IV/A7S III/A1/A7R IV: SmallRig Cage 3667 is designed for Sony A7R V, A7 IV, A7S III, A1, A7R IV to facilitate low-angle shots and protect the camera while offering a wide range of accessory mounts. NOTE: The HDMI Cable Clamp 3000 is not compatible with Alpha 1 and Alpha 7R IV because it will block the synchro terminal interface when used on the Alpha 7R V..
- Multiple Mounting Points: The cage has multiple 1/4"-20 holes and 3/8"-16 positioning holes for ARRI, which can attach accessories such as the upper handle 3765, the side handle 2093, and the monitor stand 2903B. There are 2 built-in cold shoe interfaces, which can install microphones, fill lights and other equipment.
- the QD hole at the bottom is compatible with QD shoulder straps. Holes are reserved on both sides and bottom of the cage to attach Wrist....
Check StockNeewer Camera Hot Shoe Mount Adapter Monitor Holder Compatible with Atomos Ninja Inferno Shogun ANDYCINE SmallRig Cage NATO Rail GoPro for LED Light Mic Smartphone Recorder 360° Rotation 120° Tilt
- ...It provides tight locking force to ensure the stabilization and safety while you take pictures.
- PROFESSIONAL DESIGN: Designed with standard hot shoe mount and 1/4inch screw hole on the bottom for installing filed monitor, recorder, tripod, LED video light, flash light, GoPro camera, smartphone and other photographic accessories quickly on DSLR camera, cage, rig, handle, rail or stabilizer gimbal.
- MONITOR HOLDER FOR CAMERA/HANDLE/CAGE: This field monitor mount is a necessary accessory for installing the monitor on camera, also for other vlogging and photographing devices. It can perfectly works on monitor, such as Neewer F100 F200 F5 FW568, also can be used on camera cage or rig.
- GOOD CHOICE FOR PHOTOGRAPHY: It can extend uses of different equipment in photography, and is a good choice and necessary accessories for more possibilities and practicability.
Check Stock