Top Car Ballasts

DDM Tuning HID Xenon AC Slim Replacement Ballast 55W for All Bulbs 1 Year Warranty

  • Upgrade either your OEM 55 Watt ballasts OR existing aftermarket HID ballasts with our 55 W ballast.
  • Great for brightening your 55 W HID system.
  • Easily exchanges with quick attachment plug-and-play style connectors.
Check Stock

Eye Hortilux HX91340 1000W Gold E Ballast 120/240 Grow Lighting 120/240V

  • Eye Hortilux Gold Series e-ballasts - provide consistent, stable power to the lamp for high intensity and a quality spectrum. Included: 120/240V Eye....
  • Eye Hortilux ballasts provide a consistent power supply to your grow lamps. This allows your hortilux grow lamps to do what they were designed to do,....
  • Grow lamps are responsible for providing quality light to your garden. Ballasts are responsible for providing the power to your grow lamp..
  • Item Package Dimensions: 14.5" L x 9.25" W x 5.0" H.
Check Stock

DZG D1S D1R Led Headlight Bulb D1S Led Bulb 35W 8400LM D1R Led Headlights Conversion Kit Plug And Play To Original HID Ballast 1 Pair

  • [10 Minutes Non-Destructive Installation]---DZG Upgrade D1S D1R LED headlight bulb can be installed directly to the vehicles that with original D1S....
  • [100% Decoding]---0.01S is instantly bright, no delay, see the road condition early,100% decoding. No need to make any changes to the original....
  • [High Brightness and Long Lifespan]---DZG D1S D1R LED High brightness bulb is up to 4200lm per bulb and 150% brighter than original car HID bulb. This....
  • [Attentions]--- 1)Please NEVER install D1S D1R led bulbs to D3S D3R ballasts, and NEVER install D3S D3R led bulbs to D1S D1R HID ballasts, it will....
  • [NOTICES & 2 Year Warranty]---The filter system is not always 100% right. Please check your owner's manual or the part number on your original bulbs....
Check Stock

Dimmable LED Edison Light Bulb, G25 (G80) Globe Bulb, 60W Equivalent, 5000K Daylight, Christmas Light, E26 Standard Base, UL Listed, 6-Pack

  • Directly relamp and replace the 85 watt fluorescent bulb F72T12/HO without rewiring or modification. LED lamp is powered by the ballast, which means you can eliminate the need to hire a costly electrician to do any modification. Instant ROI!.
  • All plastic diffuser for better light distribution, less spot reflections. O Rings to waterproof rotating caps and sealed diffuser for indoor and outdoor applications.
  • Energy saving of 51% from 85 watts to 42 watts with 4620 lumens output (S), Energy saving of 36% from 85 watts to 54 watts with 5940 lumens output (D).
  • T12 LED lamp works with traditional magnetic ballasts and electronic ballasts. It's fully compatible with Instant Start, Programmed Start, Rapid Start ballasts and legacy pre-heat magnetic ballasts.
  • 2-year, warranty does not require registration.
  • however, each warranty claim is subject to approval and applicable to the original purchaser as identified on the purchase invoice. Please contact us directly for warranty information for this product.
Check Stock

Robertson 3P20158 ISL296T12MV Fluorescent eBallast for 2 F96T12 Linear Lamps, Instant Start, 120-277Vac, 50-60Hz, NBF, HPF (for HO lamp Applications The Recommended Ballast is The PSB296T12HOMV)

  • ENERGY EFFICIENT BALLAST: These patented electronic instant start ballasts turn the power of light savings from store shelves to installation site. These ballasts are among the most energy efficient.
  • ENERGY EFFICIENT BALLAST: These patented electronic instant start ballasts turn the power of light savings from store shelves to installation site. These ballasts are among the most energy efficien.
  • VERSATILE BALLASTS: This ballast operates both standard and energy saving lamps orientation. The t8 ballast instant starts to operate instantly with a voltage power between 120-277 volts. It is well-known for its thermal stability, toughness, and non-conductive qualities while operating at such voltages..
  • UL LISTED: This ballast enhances any home with a trendy style. When a product is UL-listed, it means that it has been verified as safe to use by UL. Our t8 fluorescent ballast is certified by UL as well which is extremely safe to use and this provides 100% customer satisfaction..
Check Stock

Phantom PHB4035 Commercial 1000W Double-Ended Digital HPS, 277V/347V Ballast

  • Phantom double-ended technology drives maximum PAR value! The engineering excellence of Phantom ballasts is now incorporated into our new Phantom Commercial DE ballasts. Their high-frequency design is optimized for double-ended 1000W HPS lamps, and they feature highly precise microprocessors..
  • They are totally silent, efficient and effective. This model, PHB4035, is capable of 277V and 347V operation, is generator-ready and FCC-compliant, and comes with instructions and an 8-foot power cord (with bare wires.
  • 277V and 347V plug options are available from Hydrofarm)..
  • FEATURES: High-precision microprocessor control, Robust commercial design, Superior reliability, Internal RF shielding, Patented ignition control, Auto-restrike feature protects valuable lamps from damaging power interruptions, Cooling fins for maximum heat dissipation, Suitable for use in damp locations, Comes with 8′ hard-wired power cord (no plug installed), 1000W output, FCC-compliant, CSA-certified..
  • Please note that this model does not have wattage output control (dimming) and is not PX1-compatible. Remote (detached) use of reflectors with Phantom ballasts from the 40 Series line should only be done with Hydrofarm brand reflectors having a built-in 15′ cord..
Check Stock

NYLL - 18 Inch/ 18' Plug & Play LED Tube – Daylight (6000K) T8 LED Lamp Directly Relamp & Replace 15W Fluorescent Bulbs F15T12, F15T8, FO13/865 (Without rewiring or Modification) - Ballast Required!

  • Directly relamp and replace the 15 watt fluorescent bulbs F15T12, F15T8, FO13/700, FO13/800 without rewiring or modification. LED lamp is powered by the ballast, which means you can eliminate the need to hire a costly electrician to do any modification. Instant ROI!.
  • Designed with flexibility in mind, T8 diameter tube lighting fits T8/ T10/ T12 applications as they all use Medium Bi-Pin base, pin spacing 13 mm, end connector.
  • All plastic diffuser and construction for better light distribution, less or no spot reflections. Energy saving of 40% from 15 watts to 9 watts with 990 lumens output.
  • T8 LED lamp works with traditional magnetic ballasts and electronic ballasts. It's fully compatible with Instant Start, Programmed Start, Rapid Start ballasts and legacy pre-heat magnetic ballasts.
  • 2-year, warranty does not require registration.
  • however, each warranty claim is subject to approval and applicable to the original purchaser as identified on the purchase invoice. Please contact us directly for warranty information for this product.
Check Stock

HID Ballast with Ignitor – Xenon Headlight Control Unit – for Toyota & Lexus Vehicles – Prius, Avalon, IS250, IS350, GS350, GS450h – Replaces 85967-52020, 81107-30D30, DDLT003, KDLT003

  • ... | 2006 GS300 | 2010 – 2011 RX350 | 2007 – 2011 LS460 | 2008 – 2011 Avalon | 2006 – 2009 Prius | 2007 – 2008 Solara | & more. See below for full list of vehicles..
  • 【Replaces Part#】 85967-52020, 81107-30D30, DDLT003, KDLT003, 81107-12A80 – Each of your vehicle’s headlights has its own ballast. These ballasts are commonly mounted either on the back or on the bottom of the headlight. While the HID Xenon Ballasts do commonly fail so can your factory headlight bulb..
  • Please be sure to verify the Year/Make/Model information properly before purchasing this product. Please feel free to contact us if any problem..
Check Stock

NYLL - (4 Pack 4 FT/ 48” Plug & Play LED Tube - Cool White (4100K) T12 LED Directly 40W Relamp Fluorescent Bulb F40/SP41, F40/SPEC41 F40/D41 841 (Without rewiring or Modification) - Ballast Required!

  • Directly relamp and replace fluorescent bulb F40T10, F40T12, F40/ECO without rewiring or modification. LED lamp is powered by the ballast, which means you can eliminate the need to hire a costly electrician to do any modification. Instant ROI!.
  • Designed with flexibility in mind, T8 diameter tube lighting fits T10/ T12 applications as they all uses Medium Bi-Pin base or G13 base, pin spacing 13 mm, end connector.
  • All plastic diffuser and construction for better light distribution, less or no spot reflections. Energy saving of 50% from 40 watts to 20 watts with 2200 lumens output.
  • T8 LED lamp works with traditional magnetic ballasts and electronic ballasts. It's fully compatible with Instant Start, Programmed Start, Rapid Start ballasts and legacy pre-heat magnetic ballasts.
  • 2-year, warranty does not require registration.
  • however, each warranty claim is subject to approval and applicable to the original purchaser as identified on the purchase invoice. Please contact us directly for warranty information for this product.
Check Stock

YDC 2X D2 D2S D2R D2C HID Xenon Bulb Adapters Wire Harness Connector Cable Socket for Replacement Ballast Application,Retrofit Project Headlight,Fog Lamp Red

  • These adapters make it possible for aftermarket bulbs to be connected to D2S ballasts.
  • These are D2 Adapters For reusing your OEM type D2s/D2r/D2c bulb on your oem equipped hid headlights.
  • REUSING YOUR BALLASTS: These will save you some money and allow the use of D2S bulbs with your aftermarket HID ballasts. Works with 99 percent of....
  • INDUSTRY STANDARD: These are built to industry standard specifications for AMP male/female high-voltage outputs, and 'D2S' bulbs. They should work....
Check Stock

Nanolux ballasts 0-10V Module w/3 Way Splitter & 9 Cable

  • Nanolux now offers 0-10V control modules for all NCCS ready ballasts. The 0-10V module allows all Nanolux ballasts to run on any controller using....
  • Voltage range for dimming is from 100%-50% is 10V-5V..
  • Comes with 3-way splitter and 3-meter RJ11 cable.
Check Stock

Quantum 1000W Digital Ballast 120/240V Dimmable Ballast

  • Run at 100%, 75% or 50% power and strikes both metal halide and high pressure sodium bulbs.
  • Accepts 120V/240V with no wiring needed (both cords included).
  • 208V-configurable with electrician assistance.
  • The most stable output frequency of any ballast, and runs 15% cooler than other digital ballasts on the market.
  • Higher lumen output than magnetic ballasts and can run efficiently on generators without flickering.
  • Resin sealed circuit board for high humidity installations and can easily be used in conjunction with lighting controllers and flip boxes.
Check Stock