Top Car Servicing Tool

Ferrum Tools Eaton Fuller Transmissions Countershaft Rear Bearings Removal Tool RR1012TR-3 Alternative

  • Eaton Fuller Transmission Auxiliary Countershaft Support Straps Tool.
  • This tool is Used to support the aux-countershaft assemblies when servicing the aux-section on FR & RT-series (Gen 7 & 9) transmissions. Bolts Are Not Included..
Check Stock

Sealed Power 224-51198 Oil Pump Repair Kit

  • Adjustable Size: This oil pump cap cover has large adjustment range which is suitable for different oil pump caps.185mm maximum diameter, 135mm minimum diameter..
  • This tool is ideal for removing 5 & 7 hole fuel tank lids.Bending foot type with radian design, more suitable for the installation surface of oil pump cover, to ensure that the operation is not easy to slip..
  • A Must Have Tool: This fuel sender tank lock ring tool will help tackle the job of replacing the fuel sender fast and effective without damaging the oil pump rings..
  • Intended Use: This fuel pump removal tool can easily remove and install lock ring on the fuel tank when servicing the fuel pump or fuel sending unit. （use with a 1/2" drive ratchet or breaker bar）.
  • Applications: This fuel tank ring tool is suitable for vehicles to remove and install the fuel pump retaining ring that holds the fuel pump module on the gas tank.(Check the size before buy).
Check Stock

NICECNC Red Suspension Fork Spring Compressor Fork Bleeding Tool Set Compatible with All 50cc-1300cc motorcycle

  • ★ CNC Machined of aluminium it will not scratch your forks like steel ones..
  • ★ This tool is for use on all motorcycle (50cc-1300cc) fork tubes that have cartridge rods in them..
  • ★ Easily thread onto the damping rod to facilitate cartridge fork bleeding and prevent the typical mess when changing fork oil..
  • ★ This Tool Kit is an absolute necessity for anyone who intends to service or change springs in an inverted cartridge fork. This handy, shop quality kit is simple to use..
  • ★ If you plan on changing seals, springs, bushings, cartridges, oil, or just servicing your forks.
Check Stock

OTC 4508 Professional Style Seal Puller

  • Remove oil and grease seals when servicing cars SUVs and light trucks.
  • Removal without damaging the housing or bearing.
  • Hook tips in two sizes and professional handle design allows removal of hard-to-get-at seals by getting under them.
  • The tool is 12" long and the hook tip is double-secured for durability.
Check Stock

Kauplus Brake Service Kit, 14-Piece Professional Drum Brake Tool Set w/Brake Lining Gauge…

  • Idea for servicing drum brakes on most of import and domestic vehicles adjustment, installation and removal application.
  • Various of TPR grip Brake Spring tool, each of spring compressor, brake spring installer, spring removal tool and brake retaining.
  • Tri-function Brake spring pliers removes and replaces shoe return springs of drum brakes effectively.
  • 14 pcs Brake Service Kit all the contains Made in Taiwan, comes in an organizer tray, with Brake Lining Gauge, identifies thickness level ranges for brake lining inspection to be used on most foreign and domestic cars and trucks.
Check Stock

Universal Fuel Pump Removal Tool Adjustable Fuel Pump Lock Ring Tool Fuel Tank Lock Ring Tool Fuel Tank Repair Kit 5.31 to 7.17 Adjustable Lock Ring Spanner

  • Widely Fitment: This fuel pump removal tool Use for symmetrical holes type & 5 or 7 holes type fuel tank lid. (Check the type of the lock ring of your....
  • Adjutable Size: This fuel tank lock ring tool has a large adjustment range (5.83~7.83inch) which is suitable for different oil pump lock rings..
  • A MUST HAVE TOOL: This universal fuel pump removal tool will help tackle the job of replacing the fuel sender fast and effective without damaging the....
  • Intended Use: This fuel pump ring removal tool can easily remove and install lock ring on the fuel tank when servicing the fuel pump or fuel sending....
  • Applications: This fuel tank ring tool is suitable for vehicles to remove and install the fuel pump retaining ring that holds the fuel pump module on....
Check Stock

OEMTOOLS 25252 Automatic Slack Adjuster Release Tool and Wrench, Slack Adjuster Tools for Big Truck, Trailer Brake Adjustment Tool, Hand Tools for Mechanics

  • SLACK ADJUSTER TOOLS: Our slack adjuster tool set is designed to aid in the installation and servicing of Meritor-brand air braking systems on heavy-duty trucks, long-haul trucks, and trailers.
  • Brake adjustment tool simplifies brake service.
  • CONVENIENT FEATURES: The slack adjuster wrench tool comes with a 5/16 inch double-square head and a built-in offset ratcheting mechanism that provides extra clearance for hands and knuckles.
  • Ratcheting brake tool speeds up installation and service.
  • EASY TO USE: This Meritor slack adjuster features a side-mounted forward and reverse lever, allowing for quick direction changes without removing the brake adjuster tool from the slack adjuster.
  • Convenient hand tools for any mechanic tool set.
  • HANDS-FREE OPERATION: The fork-end slack tool fits securely under the pull pawl for hands-free operation to release the tension button.
  • Truck slack adjuster fork-end tool retains tensioner release button securely without prying or causing damage.
  • COMFORTABLE TRUCK BRAKE TOOLS: Our double-square offset reversible truck tool wrench comes with an EZ grip handle fo....
Check Stock

LAUNCH X431 PROS V Diagnostic Tool (Same as X431 V+), 2023 Bidirectional Scan Tool, All System Automotive Scanner, 31+ Services, ECU Coding, K ey Programmer, AutoAuth for FCA SGW, 2 Years Free Update

  • ... with 1 year subscription-free scan tools.
  • [31+ Reset Services, More in the Future] Aside from typical service functions such as Oil Reset, Injector Coding, Brake Reset, SAS Reset, ABS Bleeding, Throttle Matching … that you might expect, there are plenty of others in this LAUNCH x431 pros v diagnostic tool to make servicing a breeze in your workshop: TPMS Reset, DPF Reg, Gear Learning, AFS Reset, EGR Adaption, Sunroof, SUS Reset, Windows Calibration, etc. covers 99% of car repair and maintenance needs.
  • [Bidirectional Scan Tool & Full System Scanner] Auto scanner X431 PROS V can run the active test on all cars, i.e., give instructions to the module to perform specific tests and functions without using the vehicle’s controls, as fuel pump on/off or retract electronic parking brake. This helps debug the problem much faster than traditional scan tools. And it provides you with OEM diagnosis, getting the accurate and in-depth results across all systems (SRS, ABS, TPMS, etc.).
  • [99.9% Coverage & 24 Languages & Auto VIN] LAUNCH x431 automotive scanner covers 150+ brands, 100,000+ car models made in the USA, Europe, and Asia, also comes with full package of 14 connectors & 12 cables adapters for building successful connections to varied pre-obd2 models. The ....
Check Stock

6602 Differential Bearing Preload Wrench Alternative to Miller C-4164 Suitable for Chrysler/Dodge Vehicles.

  • APPLICATION — vehicles equipped with 7-1/4, 8-1/4, 8-3/8, and 9-1/4″ rear axles such as Chrysler/Dodge vehicles..
  • FUNCTION — Similar to Miller C-4164. help remove the adjuster nuts when servicing the subject rear axles..
  • BENEFITS — Great tool make you able to loosen the bearing preloads within 3 mins! A simple but must have tool..
  • NICE DESIGN — Long enough to get to the adjusting nut from the axle tube. Red rubber sleeve for protecting the axle seal provides nice touch..
  • SATISFACTION GUARANTEE — If you are not satisfied with Camoo products, simply asked money back guarantee with 12 months warranty. No worry about buying!.
Check Stock

LE-JX 6488 SOHC 4.0L V6 Cam Service Timing 7 Tools Kit/Chains,Head Gaskets,Camshaft,Valve Train Repairs Tool Compatible with 1997~2011 Ford 4.0L Explorer/Mercury/Mountaineer SOHC V6 Engines

  • -Fitment: Compatible with 1997~2011 Ford 4.0L Explorer/Mercury/Mountaineer SOHC V6 Engines..
  • -Function: cam service timing tools ensure correct cam timing when servicing timing belts chains head gaskets or other valve train repairs..
  • -Superior Steel: It is made of high quality heavy duty steel with black finish and meets the original specifications..
  • -Includes 7 Tools: 6478 Ford Camshaft Gear Holding Tool,6479 Ford Crankshaft Holding Tool,6480 Ford Camshaft Holding Tool Adapter,6481 Ford Camshaft Holding Tool,6482 Ford Camshaft Gear Holding Tool Adapter,6484 Ford Timing Chain Tensioner Tool,6485 Ford Camshaft Gear Bolt Socket & Extension..
  • -Great Service Support: Our offer comprehensive pre-sales and after-sales service for this tools.If you have any questions,please contact us right now..
Check Stock

OEM TOOLS 27213 Master Wheel Hub & Bearing Remover & Installer Kit Back & Front Wheel Bearing Puller Kit Back & Front Wheel Hub Puller Easy to Use

  • NO SHOP PRESS NEEDED: Remove the need for a shop press with our wheel hub bearing press tool.
  • Save time removing even seized-up wheel hub and bearing....
  • FOR PRO AND DIY MECHANICS: This wheel bearing puller/installer is one of the only tools for servicing front and rear wheel hubs and bearing on German....
  • TIME-SAVING BEARING TOOL: No need to remove the strut assembly or knuckle to remove/install the hub and bearing.
  • VARIETY OF ADAPTERS: Service your vehicles easily with our rear and front wheel bearing removal kit.
  • This wheel bearing removal tool features all the....
  • DURABLE STEEL CONSTRUCTION: Our rear and front wheel drive bearing adapter kit's steel design holds up to the torque required to remove hubs and....
Check Stock

E-cowlboy Replace for OTC 6488 Ford SOHC 4.0L V6 Cam Service Timing Tool Kit for 1997~2011 Ford 4.0L Explorer Mercury Mountaineer SOHC V6 Engines Heavy Duty Steel (7 Tools)

  • Great Compatibility Works on 1997~2011 Ford 4.0L Explorer and Mercury Mountaineer SOHC V-6 engines..
  • Benefits Ensure correct cam timing when servicing timing belts chains head gaskets or other valve train repairs..
  • High Quality Advanced heavy duty steel with black finish, durability, anti-deformation and anti-corrosion. High precision and hardness to provide a much longer service life..
  • Includes 7 Necessary Tools 6478 Camshaft Gear Holding Tool / 6479 Crankshaft Holding Tool / 6480 Camshaft Holding Tool Adapter / 6481 Camshaft Holding Tool / 6482 Camshaft Gear Holding Tool Adapter / 6484 Timing Chain Tensioner Tool / 6485 Camshaft Gear Bolt Socket & Extension..
  • 100% Satisfaction Guarantee If you're not 100% satisfied with our tools, simply return it for a full refund in 30 days. Support 12 months Warranty. Professional & Sincere Service allows you to take no risks to purchase in E-cowlboy!.
Check Stock