Top Carbide Alloy Rotary Files

Double Cut Carbide Rotary Burr Set - 10 Pcs 1/8 Shank 1/4 Head Length Tungsten Steel for Woodworking,Drilling Metal Carving Engraving Polishing

  • ✔【CARBIDE DIE GRINDER BITS】: These carbide rotary burr set, with 1/8'' shank is made from Tungsten Carbide. Total Length:45-50mm, Cutting Diameter 1/4'', Shank Length 35mm, Shank Diameter 1/8''..
  • ✔【DOUBLE CUT DESIGN】: The groove lines of these carbide rotary burr's head are crossed, which makes it more suitable for materials with relatively low density, such as wooden, plastic and aluminum..
  • ✔【ADAPTABILITY】: 1/8” shank fits dremel and most small rotary tools with three jaw chuck for accurate centering. An ideal choice for your DIY woodworking, carving, engraving, and polishing..
  • ✔【LONG WORKING LIFE】: Packed with plastic storage case for safety storage and protection. The working life of these solid rotary burr is 10 times longer than high-speed steel and 200 times longer than grinding wheel..
Check Stock

Carbide Burrs Set JESTUOUS 1/8 Shank Diameter Double Cut Tungsten Carbide Burs Rotary File Carving Grinding Bit for Die Grinder Rotary Drill Tool 20pcs

  • Used with handheld electric or pneumatic tool drive,for Die Grinder, Dremmel Tool or Rotary Drill which can go along with 1/8" shank carbide burs..
  • With tungsten carbide material ,sharp and sturdy,processing all kinds of metal and non-metal..
  • For cast iron, cast steel, carbon steel, alloy steel, stainless steel,plastics,metal and other materials..
  • Assorted shapes include: ball, cone, rounded cylinder, flat top cylinder..
  • Carbide burr kits shank diameter:3mm(1/8 inch), Cutting edge diameter:3mm(1/8 inch),and 20pcs/set..
Check Stock

Dremel 84922 Silicon Carbide Grinding Stone

  • Turn your rotary tool into a powerful rotary grinder with Dremel's silicon carbide grinding stones.
  • Ideal for sharpening, deburring and general purpose grinding on harder materials.
  • Designed to work well on stone, glass, ceramic, porcelain, gemstones and non-ferrous metals.
  • What's Included: 3/16" Silicon Carbide Grinding Stone.
  • For use with rotary tools that can accommodate a 1/8" shank size.
Check Stock

Dremel 85422 Silicon Carbide Grinding Stone, Silver

  • Turn your rotary tool into a powerful rotary grinder with Dremel's silicon carbide grinding stones.
  • Ideal for sharpening, deburring and general purpose grinding on harder materials.
  • Designed to work well on stone, glass, ceramic, porcelain, gemstones and non-ferrous metals.
  • What's Included: 25/32" Silicon Carbide Grinding Stone (x1).
  • For use with rotary tools that can accommodate a 1/8" shank size.
Check Stock

Tungsten Carbide Burr Set 1/4 Shank 10PC Double Cut Rotary Cutting Burrs Die Grinder Bits for Steel and Wood Working Grinding Carving and Engraving

  • Tungsten carbide - hardness, high strength, and durability. The service life is 8 times longer than that of HSS tool. Pilim double cut carbide rotary burr set can be used on all types of metals, including stainless steel and hardened steel, as well as wood, jade, marble, and bone..
  • Whether you are a master or a beginner, the Pilim rotary burrs are an indispensable tool for you. Milling out, leveling, deburring, cutting out holes, surface work, work on weld seams, door lock installation - Pilim rotary tool bits show good stock removal rate through optimum matching of tungsten carbide, geometry, cut, and available coating..
  • No matter what you do - jewelry making or welding, sculpting or tool making, engineering or high precision metalwork. Maybe you enjoy various DIY arts and crafts. Pilim carbide burr set contains everything you need for this..
  • Shank 1/4" - fit for most rotary tools and grinders. This die grinder bit set is easy to grasp and use, safe and reliable..
  • Use of Pilim cutting burrs - makes grinding or carving job easy. Shorten working time, improve the working environment and complete the project faster. Enjoy your creation!.
Check Stock

Carving Bits Wood Engraving Router Bit with 1/8\(3mm) Shank, 20Pcs HSS Different Burr Set to Meet Your Different Needs, Durable Rotary Tools Accessories for DIY Woodworking, Carving

  • ...t shape engraving bit of the most commonly used types. To fit different woodworking situations, each Burr is shaped to fit different angles or situations, suitable for engraving, beveling, chamfering, grooving, reaming, hollow..
  • 【High Compatibility】With 1/8 inch(3mm) shank, Length: 1.53inch(39mm). Make these HSS carbide rotary files can work with most rotary tools or die grinders (such as, for Dremel Wen, for Apollo). A valuable addition to any woodworker's rotary tool..
  • 【High Quality】Made of high-speed steel (HSS) and coated with titanium for long life and exceptionally precise cuts, durable, good wear resistance, and heat resistance. Save your time and money..
  • 【Widely Usage】A valuable supplement to woodworking rotating tools. Very suitable for detailed work, such as building and sanding dollhouse furniture, model trains, or miniature buildings and planes. Able to engrave on a wide range of materials including wood, ABS, acrylic, PVC, plastics, etc..
  • 【What You Get】20 Different Shape Rotary Bit Burrs Set and comes with a mini clear storage case, and our worry-free 3-month warranty, and friendly customer service, If YOU have any problems, please feel free to contact our customer services team, solutions would be within 24hours..
Check Stock

Carbide Burr Set Die Grinder Bits Rotary Tool Bits 1/8" Shank 20 PC Double Cut Compatible with Dremel Wood Carving Accessories Cutting Burrs Metal Grinding Engraving Polishing Porting Trimming

  • √【This is a Essential Rotary Burr Set】These carbide rotary burr set include A, C, D, E, F, G, H, L, M and N type burrs. Made from Tungsten Carbide, can be used to process: iron, steel etc.. 1/8 inch shank 1/8 inch head diameter and 1/8 inch shank 1/4 inch head diameter. Total length: 45-50 mm( 1.77-2 inch)..
  • √【High efficiency and Practical】All burrs with 1/8" shank-compatible with Dremel or most rotary tools, accurate centering. The processing efficiency is higher than the manual file tool. 20 different types of carving kit drill bits, meet your different needs..
  • √【Double Cut Design】 The double cut burr head groove lines of the head are crossed, more suitable for an object whose density is relatively low, such as wooden product, plastic and some Soft Metal..
  • √【Hardness HRC70, Carbide Die Grinder Bits】Carbide burr set, packed with nice plastic case for safety storage and protection. High efficiency, high-quality finish, long service life, good economic returns.The working life of these solid rotary burr is 10 times longer than high-speed steel and 200 times longer than grinding wheel..
Check Stock

Carbide Burr Set, 20 PCS Double Cut Carbide Rotary Burr Set 1/8" Shank Dremel Bits, Dremel Carving Bits for Woodworking, Drilling, Metal Carving, Engraving, Polishing, Porting

  • 【ROTARY BURR SIZE SPECIFICATION】These carbide rotary burr set, with 1/8'' shank is made from Tungsten Carbide. Total Length:45-50mm, Cutting Diameter 1/4'', Shank Length 35mm, Shank Diameter 1/8''..
  • 【DOUBLE CUT DESIGN】The groove lines of these carbide rotary burr's head are crossed, which makes it more suitable for materials produces a finer finish than single cut and reduces the size of the chips and slivers. It also gives greater tool control.with relatively low density, such as wooden, plastic and aluminum..
  • 【WIDE RANGE OF APPLICATIONS】 1/8” shank fits dremel and most small rotary tools with three jaw chuck for accurate centering. An ideal choice for your DIY woodworking, carving, engraving, and polishing..
  • 【HIGH QUALITY PROCESSING】Packed with plastic storage case for safety storage and protection. The working life of these solid rotary burr is 10 times longer than high-speed steel and 200 times longer than grinding wheel.The speed of the electric or pneumatic tools usually is 6000-50000 revolutions per minute..
Check Stock

HOMEIDOL Carbide Burr Set Die Grinder Bits Rotary Tool Bits 1/8 Shank 10 PC Double Cut Wood Carving Accessories Cutting Burrs Metal Grinding Engraving Polishing Porting Trimming

  • √【Material】Double cut carbide rotary burr set,tungsten carbide,can be used to process: iron, steel etc.. Shank diameter: 3 mm(1/8 inch), Cutting edge diameter: 6 mm(1/4 inch), Total length: 45-50 mm( 1.77-2 inch).1/8” fits dremel tool, straight shank can be held by most rotary tool with three jaw chuck for accurate centering.Please check the size before you buy it..
  • √【Durable】Carbide rotary burr's packed with nice plastic case for safety storage and protection. High efficiency, high-quality finish, long service life, good economic returns..
  • √【High efficiency and Practical】The rotary tools processing efficiency is higher than the manual file tool. 10 different types of carving kit drill bits, meet your different needs.No wear out after a long time use. The shaft will not bend at high speed..
  • √【Double Cut Design】 The double cut burr head groove lines of the head are crossed, produces a finer finish than single cut and reduces the size of the chips and slivers. It also gives greater tool control..
  • √【A Good Rotary tool】 A good choice of DIY carving, engraving, and polishing. Suitable for multiple types of rotating tools.Making DIY carving fans much easier to do the wood carving job.It is also an ideal gift for woodcarvers..
Check Stock

Oudtinx 50pcs Diamond Coated Grinding Head Grinding Burrs Set for Dremel Rotary Tool

  • Suitable for Grinding field stone, ceramics, glass, carbide, tile, marble, jewelry or rock.
  • Designed for Rotary Tools including Dremel..
  • Various Shapes meet your different needs, Such as,Cylinder head, cylinder, sphere, umbrella, bullet, Ding sheet type, inverted ladder, needle tip..
  • Material: Diamond,Alloy, Color: Silver Tone as shown on the picture..
Check Stock

LWCUSNJ Mini Needle File Set,10pcs 3x140mm Titanium Coated Diamond Files for Metal Glass Wood Stone Jewelry, Includes Round,Half Round,Triangular, Square,Flat, Warding Shape

  • 10PC Mini Diamond File Set - Includes Round, Square, Equilateral Triangle, Leaf, Triangle, Oval, Half-Round, Flat, Knife, Sharp-Flat ..
  • High Quality Material - Assorted diamond files, the plating layer is thickened and nickel-plated, the diamond coating is thick, so it is different from ordinary plastic files, and it is suitable for cutting metals with higher hardness..
  • Wide Application -The diamond files are suitable for cutting metals with high hardness, such as cemented carbide, quenched or carburized tools, alloy steel tools, molds, fixtures, etc., and can also be used for processing of high hardness and brittle non-metallic materials , Such as glass, ceramics, jewellery and jade, etc., can also be used for olive pit peeling, local polishing and shaping..
  • Durable - Made of alloy steel with diamond coated which enhance enhance their cutting efficiency and wear off resistance, long lasting for use..
Check Stock

WUWTOOLS Tungsten Carbide Rotary Burrs Set 1/4 Shank file bit 10PCS Double cut Rotary tool Die grinder Drill Accessories Metal Steel Wood Glass Plastic Stone DIY Carving Polishing Cutting Shaping

  • ♚PACKAGE DETAILS: 10pcs double cut solid carbide burr set with 1/4 inch shank. ◆RPM Recommendations：7000-35000.
  • ♚HIGH QUALITY MATERIAL - ◆ Made of tungsten carbide which boasts a level of hardness second to diamond on the planet. ◆ The durability is 10....
  • ♚DOUBLE CUT HEAD DESIGN- Double cut will leave a smoother finish due to producing smaller chips which makes it more suitable for wooden, plastic,....
  • ♚TUNGSTEN CARBIDE BURRS- Tungsten Carbide Rotary Burrs are widely used for cutting, shaping, grinding, sculpting, deburring, and chamfering of....
  • ♚EASY TO USE- The carbide burrs fit Makita, Fordom, Dewalt, Milwaukee, and most of the other rotary tools and grinders. Generally can be used with....
Check Stock