Top Carbide Bars

Lackmond Beast Pro Aluminum/Non-Ferrous Metal Saw Blade - 10 Metal Cutting Tool with Titanium Carbide Tipped Blade & 5/8 Arbor - NFM1080C

  • TRIPLE CHIP GRIND – Grind where a slightly wider flat top raker tooth follows a higher trapezoidal tooth’s cut to eliminate chipping and achieve....
  • VERI-BLEND HIGH DENSITY CARBIDE – Lackmond’s titanium carbide tipped blades provide the best performance for your specific cutting application,....
  • ANTI-FRICTION SLICK COAT – Drastically reduces debris and heat build-up, resulting in minimal blade drag and extended blade life.
  • EXPERT DESIGN– The non-ferrous metal blades are ideal for cutting brass, aluminum extrusions, solid bars, angles, and channel shapes.
  • EQUIPMENT – Designed to be used on chop-miter saws and table saws.
Check Stock

CURT 17208 Replacement Weight Distribution Hitch Hookup Brackets , Black

  • Allows for secure mounting of the spring bars on the trailer frame.
  • Perfect for use on trailers with LP tanks or other obstructions.
  • Snap-up design allows for easy leveraging of spring bar.
  • Bracket protected by a highly durable carbide powder coat finish.
  • Includes two hookup brackets, bolts and pins.
Check Stock

POWERTEC 15519 Aluminum Oxide Grinding Wheel 100 Grit, 6\ x ¾\ with 1/2\ Arbor

  • INCLUDES: (1) Diamond Grinding Wheel Dresser Tool.
  • FUNCTION: Seamlessly clears unwanted debris and impurities while moving the diamond surface across the wheel to reveal sharp and clean surfaces - making abrasive deburring and grinding wheel dressing quick and easy.
  • APPLICATIONS: Perfect for resin bonded, chlorinated, mechanized, and silicone carbide grinding wheels.
  • BUILD: Constructed with premium quality metal, this handheld wheel dresser comes with ridged handles for easy grip, along with guide bars and mounting.
  • SPECS: Overall tool length is 4-5/8” long with a 1/2” x 1-3/4” diamond surface, and a silver 36 grit diamond chip.
  • Returns your wheels to peak-performance readiness.
  • Clears unwanted debris and impurities from your grinding wheels revealing sharp clean cutting surfaces.
Check Stock

CURT 17005 Weight Distribution Hitch Bolt-On Hookup Brackets

  • Allows for repositioning of spring bars around an LP tank or other obstruction.
  • Replaces factory spring bar brackets or hangers.
  • Bolt-on design uses two bolts per bracket to fasten directly to the frame (some drilling required).
  • Brackets protected by a highly durable carbide powder coat finish.
  • Includes two chain hangers, bolts and pins (chains not included).
Check Stock

VeYocilk Lathe Threading Carbide Inserts:10 Pcs 11IR A60 1/4 Carbide Inserts for Internal Threading Holders CNC Cutting CNC Turning Tool

  • High Efficiency: This turning tool holders kit for semi-finishing and finishing operations, can reduce the tool grinding cost and improve the cutting efficiency..
  • High Performance: Made of carbide and the coating material is TIN, it can be used for processing steel, the inserts has high hardness, low friction coefficient, good wear resistance and strong impact resistance..
  • Threading Boring Bars: The material of the boring bar is 40Cr steel, widely use, tightly impacted bolt, simple structure, often used for small hole machining..
  • Package Includes: 1PC SNR0008K11 + 1PC SNR0010K11 + 1PC SNR0012M11 turning tools + 3PCS 11IR A60 turning inserts + 3PCS T8 wrench..
  • Best Service: The carbide inserts and turning tools holder are packed in plastic containers, which is safe and easy to store. Any more question about this item, please feel free to email us..
Check Stock

HHIP 1015-0502 Double End Boring Bar, 1/2\ Bar Diameter x 9\ Overall Length x 3/16\ Bit Size

  • Broached holes accept high speed steel and carbide tool bits.
  • Machined from selected steel for greater strength and rigidity.
  • Bars have one 45 degree end and one 90 degree end.
Check Stock

HHIP 1015-0748 Double End Boring Bar, 3/4\ Bar Diameter x 8\ Overall Length x 1/4\ Bit Size

  • Broached holes accept high speed steel and carbide tool bits.
  • Machined from selected steel for greater strength and rigidity.
  • Bars have one 45 degree end and one 90 degree end.
Check Stock

HHIP 1015-1001 Double End Boring Bar, 1 x Bar Diameter x 12\ Overall Length x 1/4\ Bit Size

  • Broached holes accept high speed steel and carbide tool bits.
  • Machined from selected steel for greater strength and rigidity.
  • Bars have one 45 degree end and one 90 degree end.
Check Stock

Lathe Threading-Tool Bit Set 21pcs - 7pcs 5/8 Turning Holder Boring Bars / 14pcs Indexable Carbide Inserts Golden CCMT09T304 DCMT11T304 16IR A60 16ER AG60 MGMN300 for Cutting Tool

  • 【Package】: 7pcs Turning tools (boring bars) with 5/8" shank diameter + 14pcs indexable GOLDEN carbide inserts + 7pcs wrenches.
  • 【Durable and Long Life Turning Holder】: Made of 42CrMo steel which with high hardness and is very wearable, also have strong toughness and low-temperature impact resistance.
  • 【Indexable Carbide Golden Inserts】: Agile cutting, good chip removal, no cutting break.
  • 【Easy to Use】: Easy to assembly, shock proof.
  • 【After-sales Service】 : Any questions, please contact us anytime, we'll quickly response to service for you. We offer FREE EXCHANGE for dissatisfaction.
Check Stock

Wisamic 11 Pcs 5/16 inch Carbide Tipped Cutter Set for Metal Lathe Turning, Boring, and Chamfering

  • 2 pieces: 4-7/8" long Cranked Boring Bars.
  • Made of drop forged tool steel with tungsten carbide tips..
  • Can be resharpened & reshaped for many times..
  • Suitable for machining mild steel brass copper and plastics..
  • For metal lathe, mini lathe, milling other general machining operations such as turning & boring..
Check Stock

CMT 855.504.11 Lock Miter Bit, 1/2-Inch Shank, 2-Inch Diameter, Carbide-Tipped

  • 7/8-inch Cutting Length, 45°Cutting Angle, Material 3/8 to 3/4-Inch thick, 2-3/8-Inch Length.
  • Create boxes, stretcher bars, frames and any assortment of right angle or parallel joint projects.
  • ideal for milling miter joints in 1-1/8-Inch stock Use on router tables only.
  • Non-Stick Orange Shield Coating, Anti-Kickback Design, Equipped with Bearing.
  • 2 SinterHip Hi-Density Industrial Chrome Carbide cutting edges for long-lasting performance.
Check Stock

1/2\ Lathe Threading Tool External/Internal Threading Holder SER 1212H11+ SNL 0008K11 Threading Holder with 11ER AG60 11IR AG60 Threading Inserts (SER1212H11+SNL0008K11+11ER AG60)

  • ♥Package includes ：1PC SNR0008K11 + 1PC SNR0010K11 + 1PC SNR0012M11 turning tools + 3PCS 11IR A60 turning inserts + 3PCS T8 wrench.
  • ♥3pcs Thredaing boring bars : The material of the boring bar is 40Cr steel, Widely Use, Tightly impacted bolt, simple structure, often used for small hole machining..
  • ♥3pcs 11IR A60 boring inserts : 60°general thread insert, processing pitch range: 0.5mm - 1.5mm. Inserts are made of carbide and the coating material is TiN ,it Can be used for processing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ♥Package: The carbide inserts and turning tools holder are packed in plastic containers, safe and easy to store ..
  • ♥ If you need more 11IR A60, please search ASIN：B09496NZ3R.
Check Stock