Top Carbide Brazed Insert - BuyWiseBest.com

American Carbide Tool Carbide-Tipped Pointed Nose Lathe Tool Bit, D Style, Neutral Hand, C5 Grade, 0.5\ Square Shank, D 8 Size

D style carbide-tipped lathe tool bit has a pointed tip with an 80-degree included angle for light turning, undercutting, chamfering, and boring.
Neutral handed for right-to-left or left-to-right feed.
C5 grade uncoated carbide tip provides good resistance to shock and wear for use on soft steel and steel alloys.
Tip is brazed onto steel shank for strength.

DURABILITY: Induction-brazed carbide tips of 10-inch miter saw blade are made for durability and long life.
NO MORE WARPING: Heat-treated plate eliminates warping.
ACCURATE CUTS: Precision ground teeth for smooth, accurate cuts.
CORROSION RESISTANT: Corrosion resistant coating designed to prevent rust.

.325 pitch 0.050 gauge - 72 Drive Link - Semi Chisel Type Chain - Very Aggressive Teeth.
Fit's 18" 435 440 445 and some others with the chain specs listed above ONLY.
Solid carbide tipped chain is brazed to case hardened saw chain for the ultimate in life and cutting ability. NOTE Designed for woodcutting keep it up and out of the dirt and avoid hitting solid objects this can break or chip the carbide tooth. Do not use for Stumping.
Also DO NOT USE in extreme cold weather the teeth will break off.

Model of each holder & the original insert: MGEHR08-2J (insert: MGMN200-M).
Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size..
Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..

CARBIDE TIPPED CUTTER- Premium carbide is brazed for superior strength, durability and wear resistance. 1-15/16’’ Diameter x 2’’ Depth of Cut annular cutter include free Pilot Pin..
EFFICIENT & PRECISE- Cut holes in steel quickly, precisely and safely. It can cut holes in steel up to 10X faster than standard twist drill bits..
EXCELLETN DESIGN- Triple-Cut geometry provide efficient cutting, fast feed rate, less vibration, smooth hole surface and long tool life..
WIDELY USE- For smooth and easy cutting almost all types of steel, including materials that are extremely difficult to cut such as stainless steel, titanium, hardened steel and rail steel..
UNIVERSAL FIT- 3/4" Weldon shank with 2 flats - fits most major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders..

5 PC 3/8'' indexable carbide insert turning tool bit set + 10 PC carbide tip combo.
5 PC 3/8'' indexable carbide insert turning tool bit set specs:Shank Diameter: 3/8".
AL/AR Style 0 degree Lead, BL/BR Style 15 degree Lead, E Style 30 degree Lead.
10 PC 3/8'' Inserts TCMT 2151 specs:Case overall dimension: 1-1/2''L x 3-3/4''W x 1/2''H.
Quantity: 1 set (5 pcs 3/8'' indexable carbide turn tool bit set + 10 pc carbide tips).

PACKAGE INCLUDES : You will receive 1 pieces SER1616H16 5/8”/16mm shank diameter lathe turning tool holder , 1pcs SEL1616H16 5/8”/16mm shank diameter lathe turning tool holder,1pc 16ER AG60 threading carbide turning insert,1pc 16IR AG60 threading carbide turning insert and 2pcs T15 wrenches..
Material : The SER/L1616H16 5/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
Turning tool holder size : Shank Diameter ( length×width ) : 5/8"*5/8"(16mm*16mm).
Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 3mm..
If you need more inserts,you can search for ASIN:B07FFR8K53(16ER AG60) or B07FFPFT93(16IR AG60) ..

3/8 pitch 0.050 gauge - 72 Drive Link - Semi Chisel Type Chain - Very Aggressive Teeth.
Solid carbide tipped chain is brazed to case hardened saw chain for the ultimate in life and cutting ability. Designed for woodcutting keep it up and out of the dirt and avoid hitting solid objects this can break or chip the carbide tooth.
( READ ) MS290 and MS291 can have .325 pitch and this will not fit. Buyer is responsible for verify what pitch chain your saw has.
Also NOTE Correct use you must allow the chain to cool back to ambient temperature between uses the teeth with break off if you stop using the chain for any amount of time and then pick it up and start going again. Allow chain to cool a minimum of 3 hours.

Diamond Grit cutting edge for cutting cinder block, brick, cast iron, pipe and other abrasive materials..
Up to 3-times faster and 3-times longer life than carbide grit blades.
Vacuum brazed diamond grit blade for heavy use.

Package: you will receive 3 pieces 5/8 inch lathe indexable carbide turning tool holders, 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 3 pieces carbide inserts and 10 pieces CNMG 431,10 pieces WNMG 431, 10 pieces TNMG 331 metal indexable carbide turning insert blades, cufficient quantity and easy to replace.
Material: lathe indexable carbide turning tool holders are made of quality cemented carbide and tungsten steel.
The cemented carbide material makes the turning tool durable and adaptable.
Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability.
Size: diameter of the handle is (5/8 x 5/8 inches/ 16 x 16 mm).
Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand.
Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and accuracy have reached the first grade.
Easy to store: insert 30 pieces of cemented carbide into 3 boxes, and put them in a plastic container, safe and easy to store, compatible with MTJNL1616H16, MWLNL1616H08, MCLNL1616H12 or MTJNR1616H16, MWLNR1616H08, MCLNR1616H12.

Insert model for this holder: Carbide insert TiN Coated MGMN200 Double End Cut-off.
Double End Cut-Off Carbide Inserts for Cutting Aluminum.