Top Carbide Disc Cutters

PSI Woodworking LCHOL3C Wood Lathe Carbide Tip Mini Hollowing Tool 3pc Chisel Set

  • Create small bowls and hollow vessels on your woodturning lathe with this carbide tipped hollowing tool chisel system.
  • Includes (3) tools with 6mm carbide cutters: Straight, Medium-angle Swan Neck, Steep-angle Swan Neck.
  • Overall length of each tool is 15" with 10" handle and 5" blade.
  • Also includes hex wrench, wooden storage case, and instructions.
  • Replaceable 6mm Carbide Cutters (LCHOL3CX) are available.
Check Stock

P-Line Adaro Aluminum Pliers (7.5-Inch, Red)

  • Tungsten carbide line cutters cut 500lb nylon/braided line.
  • Ultra-smooth Operation with convenient hold-open spring.
  • Nylon belt pouch with strong coil lanyard to prevent accidental loss.
  • Tungsten carbide cutters for braided line..
Check Stock

PSI Woodworking PKTRIMSE Penturning Carbide Insert Barrel Trimming System

  • Includes: Cutter Head, (2) Carbide Cutters, (2) Cutter Screws, 7mm Pilot Shaft, (5) Trimming Sleeves, Allen Wrench, Star Wrench.
  • The 4-sided replaceable 12mm carbide cutters (PKTRIMSX) will cleanly trim pen barrels up to 1" diameter.
  • Included components will trim (9) tube diameters: 7mm, 8mm, 3/8.
Check Stock

KastKing Cutthroat 7 inch Fishing Pliers 7 inch Straight Nose

  • Corrosion Resistant Stainless Steel – The KastKing Cutthroat pliers are made from corrosion resistant 420 stainless steel and coated with a tough....
  • Tungsten Carbide Cutters – Super hard tungsten carbide cutters slice though mono, fluorocarbon, or braid with ease. Side mounted anvil cutters for....
  • Multi-Function Jaws – Grab and remove any fish hook with the serrated jaws or take advantage of the crimping slots to secure a split shot weight or....
  • Rubber Handle – The ergonomic textured rubber handle provides comfort and control. A thin grip profile and the spring loaded jaws allow for easy one....
  • Sheath/Lanyard Included – Includes a custom molded sheath with belt clip to ensure your investment is protected from normal wear and tear. Clip on....
Check Stock

KastKing Fishing Pliers with Fish Lip Gripper, 6" Fishing Split Ring Nose Pliers, 9" Fishing Lip Gripper, Orange

  • Key Features – Fishing Tools - Corrosion resistant 420 Stainless Steel fishing pliers and fish lip gripper – Durable corrosion resistant coating – Tungsten carbide line cutters slice through mono, fluorocarbon and braided fishing line with ease – Open split rings to change hooks – Tune baits - Crimp split shot or build leaders..
  • Corrosion Resistant Stainless-Steel – The 6-inch fishing pliers are made from corrosion resistant 420 stainless-steel and coated with a tough, corrosion resistant exterior coating for added protection. Designed for long term performance, these fishing pliers are ideal for both freshwater and harsh saltwater environments..
  • Tungsten Carbide Cutters – Super hard tungsten carbide cutters slice though mono, fluorocarbon, or braided fishing line with ease. Side mounted anvil cutters for easy access, cutters on the KastKing Fishing Pliers allow you to cut your tag end as close to the knot as you desire without any obstructions..
  • Multi-Function Jaws – Grab and remove any fishhook with the serrated jaws or take advantage of the crimping slots to secure a split shot weight or build a steel lea....
Check Stock

Carbide Tipped Wood Turning Tools Set Latest Lathe Rougher Finisher Swan Neck Hollowing Tools and Interchangeable Aluminum Alloy Grip Handle with Diamond Round Square Carbide Inserts

  • OUR TURNING SYSTEM INCLUDES - (1) 11'' Tool Handle, (1) 9.8'' Handle Extension, (3) Carbide Cutter Tool Shafts (Circle, Square, Diamond), (1) Swan neck Carbide Cutter Hollowing Tool, (1) T15 Wrench, (1) Allen Wrench, (1) Aluminum Protective Case With Foam Insert..
  • MATERIAL - Tools are made with tungsten carbide tips for extended cutter life, stainless steel arbor for strength and durability, and aluminum oxide alloy handles for grip, comfort, and durability..
  • INDEXABLE CUTTER DESIGN – Indexable carbide cutter inserts can be rotated or replaced to provide a fresh cutting edge whenever needed, ( Click the "Aogbra Store" to order replace carbide cutter inserts when you need ).
  • EASY TO USE – The variable length shaft design and carbide cutters are valuable to all skill levels of woodworkers. Carbide cutters allow both beginner and experienced turners to quickly start projects by reducing the learning curve associated with traditional turning tools..
  • TOOL DETAILS – Tool shafts are CNC machined from square high carbon steel, making them strong and solid in the hand. The square shaft profile helps keep the tool flat on the tool rest and level with the floor, making them less likely than round shaft tools to roll and shift while on the tool rest..
Check Stock

PSI Woodworking LXPMSET Lathe Woodturning Ultra Carbide Chisel System

  • Multi-function carbide chisel system that uses a single handle with three interchangeable, replaceable carbide cutter profiles.
  • Includes: Chisel handle, 2" Radius Carbide Cutter (LXPMBS) and Carrier, 3/8" Round Carbide Cutter (LXPMBR) and Carrier, Diamond Carbide Cutter (LXPMBD) and Carrier, and all needed 3mm set screws.
  • Also includes: Magnetic Chip Deflector (LXPMCD), 3mm Allen Wrench, Nylon storage and carrying case, and instructions.
  • Tool length is 16" consisting of 11.5" handle and 4.5" blade.
  • Flat bottom blade ensures straight, level cut along tool rest.
  • Numbered edges on carbide cutters for consistent, reliable rotation.
Check Stock

Making Wooden Toys: 12 Easy-to-Do Projects with Full-Size Templates (Dover Woodworking)

  • Highest quality lathe woodturning tools 100% designed and manufactured in the USA.
  • Accepts specially designed proprietary replacement carbide cutters.
  • Never sharpen again. Cutters have multiple sharp sides. Carbide stays sharp much longer than steel.
  • 8.5” by 1/2” square CNC machined stainless steel bar.
  • Greatly simplifies learning curve when turning. No complicated angles to learn and remember..
Check Stock

KastKing Intimidator Fishing Pliers,Floating Fish Lip Gripper,Teflon Coated Steel Pliers, Muti-Function Fishing Pliers Hook Remover Split Ring,Fly Fishing Tools Set,Fishing Gear,Fishing Gifts for Men

  • Key Features - Floating lip grip will not sink - Tungsten carbide line cutters slice through mono, fluorocarbon and braided fishing line with ease – Tough S45 steel construction will never bend or break – Teflon coating – Open split rings to change hooks – Crimp split shot or build leaders – Tune baits.
  • Tungsten Carbide Cutters – Super hard tungsten carbide cutters slice though mono, fluorocarbon, or braided fishing line with ease. Side mounted anvil cutters for easy access, cutters on KastKing Intimidator Fishing Pliers allow you to cut your tag end as close to the knot as you desire without any obstructions The raised surface behind the blade ensures your line will always be in the cutting zone..
  • Teflon Coated Steel – KastKing Intimidator steel fishing pliers are made from durable S45 steel with a Teflon coating for added protection. This extremely rigid and durable material resists bending and breaking to ensure long term performance of your fishing gear. This fishing tool is ideal for freshwater environments..
  • Multi-Function Jaws – Use the serrated jaws on any fishhook as a fishhook puller or use the spl....
Check Stock

Fein JME Holemaker III High Powered Endurance Magnetic Base Drill with 2\ Maximum Drilling Depth - 3/4\ Straight Shank, 1,100 W, 590 RPM - 72705961090

  • The optimal drilling speed designed for use with carbide and hss cutters on the toughest jobs and applications.
  • Effective solution for customers drilling harder materials.
  • Improved magnet for easier placement and better holding power on thinner material.
  • Cost effective drill for running with Carbide cutters which offer longer life, higher cutting rate and capable of cutting harder materials. Also running with standard HSS cutters with great results..
  • Extemely wear resistant concept with durable newly designed polyurthane motorhousing for use in industry and manual trades..
  • Side-reversible feed handwheel with hexagonal hub.
  • Extemely lightweight drill yet powerful enough for heaviest drilling applications..
Check Stock

P-Line Adaro Aluminum Plier Replacement Cutter

  • Easily cuts all types of line including braid.
  • Package comes with replacement cutters and allen wrench.
  • Cutters fit P-Line Adaro aluminum pliers.
Check Stock

KastKing Cutthroat 7 Fishing Pliers,420 Stainless Steel Fishing Tools,Saltwater Resistant Fishing Gear,Corrosion Resistant Teflon Coating,Rubber Handle 7 Straight Nose Stryker Green

  • Corrosion Resistant Stainless-Steel – The KastKing Cutthroat fishing pliers are made from super hard 420 stainless-steel and coated with a tough....
  • Tungsten Carbide Cutters – Super hard tungsten carbide cutters slice though mono, fluorocarbon, or braid with ease. Side mounted anvil cutters for....
  • Multi-Function Jaws – Grab and remove any fishhook with the serrated jaws or take advantage of the crimping slots to secure a split shot weight or....
  • Rubber Handle – The ergonomic textured rubber handle provides comfort and control. A thin grip profile and the spring-loaded jaws allow for easy one....
  • Sheath/Lanyard Included – Includes a custom molded sheath with belt clip to ensure your investment is protected from normal wear and tear. Clip on....
Check Stock