Top Carbide For Construction

Diablo D1024X 10-Inch 24-Tooth ATB Ripping Saw Blades Bundle (2-Pack)

  • ... deliver longer life — and frames more houses — than other framing blades.
  • Ideal Usage: For a fast-acting blade that produces clean rip-cuts in a variety of framing material, look no further than the Freud D1024X Diablo 10-Inch Ripping Saw Blade. Ideal for most general-construction applications, this is your go-to blade for slicing through rough framing lumber, high-quality finish lumber, plywood, OSB (oriented strand board), and hardboard siding.
  • Fits Table Saws: The Diablo D1024X is a great addition to your workshop because it's designed with the versatility to fit a variety of table saws.
  • Features Shock-Resistant Carbide: The Blade features shock-resistant carbide for long-lasting precision, so you can count on it over the long term, as it is designed for durability. The blade's hardy teeth are protected by Diablo's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide.
Check Stock

IRWIN Tools MARATHON Carbide Cordless Circular Saw Blade, 6 1/2-Inch, 24T, .063-inch Kerf (24029CL)

  • Circular saw blades have an ultra-thin kerf for more cuts per charge.
  • Each circular saw blade has face-ground, carbide-tipped teeth that produce fast, clean cuts.
  • Aggressive, 22° hook angle for swift cuts.
  • Construction-grade teeth provide longer life.
  • Circular saw blades are designed for framing and ripping.
Check Stock

EZARC Carbide Reciprocating Saw Blade R943HM Endurance for Hard Wood 9-Inch 3TPI, 3-Pack

  • [Carbide Technology] Up to 50x longer life than bi-metal reciprocating saw blades.
  • [Cut All Woods] 3 teeth per inch and state-of-the art carbide technology ensures effective cutting of all wooden materials, regardless of density and hardness.
  • [Ultimate cutting performance] Productivity, robustness and long life, ideal solution for toughest jobs on the construction site..
  • [Design for Toughest Materials] Each carbide tooth is precision ground and individually welded, provides ultimate flexibility and impact strength needed for heavy duty demolition work.
  • [Blade Dimension] 9-inch 3 TPI all woods cutting , 1/2 universal shank fits all major sawzall saws such as Bosch, Milwaukee, Black&Decker, Hitachi, Makita, Metabo, Dewalt, Porter Cable, Skil, Rockwell etc..
Check Stock

DrillForce 10pcs 3/16 inch x 6 inch SDS Plus Hammer Drill Bits, Rotary Hammer Drill Bits , Ideal for Drill Holes into Masonry, Concrete, Brick & Cinder Block.

  • Package and Size:10 piece. Diameter Size 3/16 inch, Total Length 6 inch..
  • Heavy Duty: SDS Plus Drill Bit for Rotary Hammers has Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into Masonry, Concrete, Brick & Cinder Block..
  • Easily & Smoothly Drill:3-4X More into Reinforced Concrete, Brick and Masonry by relying on Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched Ease, Long Life & Safe Drilling..
  • Carbide Tipped: Bits are carbide tipped for long life in tough applications. Centric conical tip guides bit through concrete and provides optimal hole geometry. Wear mark alerts user when bit is no longer precise. Longer life in rebar vs. standard bits..
  • IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS-Plus bits for reliable anchoring and sturdy holes. Fit certain Bosch, Hilti, Milwaukee, Makita, Dewalt, and Porter Cable drills and other SDS-Plus Rotary Hammers..
Check Stock

Makita T-01426 2 Pc. 6-1/2\ Carbide-Tipped Circular Saw Blade Set

  • Ultra-thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss.
  • Carbide tooth construction for clean cuts and long life.
  • Fully hardened and expertly hand-tensioned steel saw plates for true cuts.
  • Specially designed for cordless saws to permit more cuts per charge.
  • For use with 6-1/2" Cordless Circular Saws with 5/8" arbor.
Check Stock

Makita T-01410 6-1/2\ 40T Carbide-Tipped Circular Saw Blade, Fine Crosscutting

  • Ultra-thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss.
  • Carbide tooth construction for clean cuts and long life.
  • Fully hardened and expertly hand-tensioned steel saw plates for true cuts.
  • Specially designed for cordless saws to permit more cuts per charge.
  • For use with 6-1/2" Cordless Circular Saws with 5/8" arbor.
Check Stock

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • 152mm 6" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • 102mm 4" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

Carpenter Pencil Set Carpenter Scriber Marking Kit Including 3 Pieces Carpenter Pencils with Replaceable Marker Refills Gold Carbide Scriber Tool Red Automatic Center Hole Punch for Construction Tools

  • ... on the job as strike force can be increased or decreased with the adjustable red cap, and the knurled non slip surface and precision centered tip increases force control for more accurate and precise holes in your projects, which can mark points precisely and accurately in various materials.
  • Quality material: these construction carpenter pencils are made of plastic and metal material, which are sturdy and practical to use.
  • The pencil is 2B refills, which is grease and stronger for you to use for a long time.
  • The materials and the features make the construction carpenter pencil a nice woodworking pencil tool for architecture and bricklayers and any other disciplines.
Check Stock

Bosch CBCL1260M 12 In. 60 Tooth Edge Cordless Circular Saw Blade for General Purpose

  • USE WITH: Optimized for any 12" miter saw or slide miter saw.
  • VERSATILITY: Best for fast cross cutting, cutoff and trim of wood and plywood.
  • PRECISION: SpeedCoat antifriction finish for faster and effortless cutting.
  • DURABLE: Blades are designed for tough construction jobs, because they are engineered with Brute Carbide, an upgraded C3/C4 micrograin carbide formulation that increases impact resistance.
  • LONGEVITY: Bosch cordless blades are optimized for cordless cutting, with reduced kerf for speed, less waste, and extended battery life.
Check Stock

Saw Reciprocating - Reciprocating Saw Cut Through Metal Saws - Power

  • [Carbide Technology] Up to 50x longer life than bi-metal reciprocating saw blades.
  • [Heavy Metal Application] 8 teeth per inch teeth design is ideal for cutting all kinds of metal in tough applications, e.g. high-alloy construction....
  • [Ultimate cutting performance] Easy to cut advanced materials where bi-metal blades fail quickly, such as stainless steels, high-alloy steels or....
  • [Design for Toughest Materials] Each carbide tooth is precision ground and individually welded, provides ultimate flexibility and impact strength....
  • [Blade Dimension] 6-inch 8 TPI metal cutting (3/16 in. -1/2 in. ), 1/2inch universal shank fits all major sawzall saws such as Bosch, Milwaukee,....
Check Stock

KOWOOD PRO Flush Trim Router Bit(16 Flutes) 1/2\Shank,2\Cut Length

  • KOWOOD Pro flush trim router bit is designed specifically for professional trimming work.
  • This flush trim router bit features 16 individually brazed carbide tips in a compression design in order to eliminate chipping.
  • Multi blade technology can effectively improve work efficiency and tool life.
  • Quality construction, YG8 tungsten carbide blade provides a clean and accurated cut with durable powder coating finish.
  • ▲What You Get▲KOWOOD Pro Flush Trim Router Bit (16 Flutes) 1/2" Shank, 2" Cut Length * 1.
  • 12-Month Service Card. Our after-sales customer service is available at any time. Please feel free to contact us for help.
Check Stock