Top Carbide High Speed Drills

Hegebeck Carbide Hole Cutter, 22mm Carbide Hole Saw Tipped Tooth Round Hole Saw Drill Bit for 5mm Stainless Steel, Metal Plate, Iron, Aluminum

  • 【Parameter】- Hole Diameter: 22mm / 0.87inch.
  • 【Material】- Adopt carbide material, longer lasting performance, unique cutting-edge grinding technology, sharp and wear-resistant, not easy to break, drilling high efficiency and fast chip removal, extremely long service life..
  • 【Feature】- Fast cutting and chip removal, arc-shaped chip pocket design, conducive to the smooth discharge of iron filings, reducing chip jamming, and conducive to chip holding at the limit cutting depth.
  • Pilot drill spring design, control the displacement of the cutting edge, avoid damaging the drill bit by sudden cutting..
  • 【Wide Application】- Used with power drill, magnetic drills, benchtop drills to quickly and accurately cut stainless steel, sheet metal, cast iron, mild steel, aluminum.
  • Prohibit the use of ceramic tile, concrete, walls, stone..
  • 【Warm Tips】- Keep the drill running evenly at a low speed or pre-drill the center hole for extending hole cutter life. Please add coolant or water when working on stainless steel and steel metal sheets above 5mm..
Check Stock

Chicago Latrobe 790 Solid Carbide Spotting Drill Bit Regular Length Uncoated Bright Finish Round Shank Right-Hand Spiral Flute 120 Degree Conventional Point 1/4 Size

  • Spotting drill bit creates a pilot hole to reduce walking and improve hole accuracy.
  • Solid carbide drills produce close-tolerance holes in hard materials, and have a longer tool life at higher speeds than cobalt and high-speed steel (HSS).
  • Uncoated (bright) finish has no additional surface treatment or coating.
  • 120-degree conventional point drills a pilot hole to accurately guide a 118-degree secondary drill bit.
  • Round shank accommodates most drill chucks.
Check Stock

MAEXUS Hand Drill Bits Set, Pin Vise Hand Drill, Mini Micro Drill and Twist Drills for Jewelry Making, Pin Vise Woodworking Hand Mini Drill for Model Resin Jewelry Walnut Amber Beeswax Olive (36 Pcs)

  • 【Various Functionse】Drill set Includes 1 * hand drill, 25 * twist drill bits, 10 * PCB mini drills. Hand Drill and twist drills are made of high-speed steel, PCB mini drills made of tungsten carbide, offer superior performance and are easy to use..
  • 【Ingenious Design】Pen-shaped hand drills for ease of carrying and storage. Precisely designed chuck to keep that drill upright, Ability to easily rotate vice head to adjust the clamp for different size drill bits..
  • 【10 Pcs Colorful Mini drills】10 sizes: 0.1-1 mm, PCB mini drills the average of 38 mm in length, professionally designed for processing PCB, SMT, CNC, circuit boards, carbon fibre, composite boards, common FR-4, CEM-3 boards, etc..
  • 【Extremely Versatile】25 Pcs Twist drill bits have 12 different sizes to satisfied your different demand: 0.5mm / 0.6mm / 1.0mm / 1.2mm / 1.5mm / 1.8mm / 2.0mm / 2.35mm / 3.0mm, is perfect for drilling a small hole on wood, plastic, rubber, walnut, model, bones, horns, amber, olives, and other materials, jewelry, plastic, and many other DIY projects..
Check Stock

Fielect Silicon Carbide Grinding Wheel Bench Grinding Wheels Green Silicon Carbide 120 Grit for Surface Grinding 1pcs

  • 【Dimension】: 150 x 25 x 32mm / 5.91 x 0.98 x 1.26 inch 120 grit Green silicon carbide grinding wheel..
  • 【High Grade】:Made of Green silicon carbide, with high hardness and the shape reminds well..
  • 【Features】: Maximum cut rate and cool cutting action on hardened or high-speed tool steels.Provides clean, fast, high precision edges and surfaces for non-ferrous tools and metals such as aluminum, copper or titanium .Uniform particles, easy to sand, less wear and tear.It has high brittleness, sharp abrasive grain and good thermal conductivity..
  • 【Wide Application】: Works exceptionally well on tools like drills, mills or disposable tips for burring, grinding, stock removal, blending, rust removal, cleaning and finishing ,Ideal grinding tool for medium and high tensile strength meta l materials..
  • 【Warm Tips】: If you have any issues, inquiries or need assistance, please feel free to contact us directly.Please check the size of the product before buying..
Check Stock

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

  • ✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....
Check Stock

NewShark Concrete Drill Bit Set 10PCS, Masonry Drill Bits for Brick, Glass, Plastic and Wood, Tungsten Carbide Tip Work with Ceramic Tile, Wall Mirror, Paver on Concrete or Brick Wall（3/16”-1/2” ）

  • 【SIZES OF MASONRY DRILL BITS】Includes these 3.8”~4.8” in length: 2× 3/16” (5mm), 4× 1/4” (6mm), 2× 5/16” (8mm).
  • 1×3/8” (10mm) and 1× 1/2”(12mm). Easily meet your drill needs..
  • 【HIGH-QUALITY MATERIALS】Made of high-quality carbide YG6X alloy, the rust-resistant treatment and reinforced head prevent the drill from cracking and provide longer service life..
  • 【SILKY DRILLING】Carbide YG6X concrete drill bit set is sharper, double design of cross arrow and spiral groove, accurate positioning, easy chip removal, and easy penetration of various materials..
  • 【EASY TO INSTALL AND USE】1/4 Inch Hex Shank Masonry Drill Bit Set with Locking Quick Change Collet for most common drills, power drills, hand drills and bench drills, easy to install and remove, more secure..
  • 【WIDE APPLICATION】 Concrete drill bit set, ideal for drilling holes in bathroom tiles or walls, bricks, wood, glass, stainless steel, concrete, etc. （Remember to add water or coolant when drilling）.
Check Stock

Lyman, Brass Smith Case Trim Xpress Case Trimmer

  • Lyman’S Case Trim Xpress Gives Rifle Reloaders The Speed And Accuracy That They Have Been Looking For When Trimming Cases..
  • The Unit Has Its Own Power Source, And A Strong Variable Speed Motor, So There Is No Need To Use Power Drills Or Purchase Separate Motors..
  • By Using Bushings That Contact On The Shoulder Of Bottle Neck Type Cases, The Case Trim Xpress Will Quickly And Cleanly Trim Your Brass By Simply Pushing The Case Against The Long-Lasting Carbide Cutter..
  • The Trimmer Comes With 10 Bushings Designed To Fit Most Popular Bottleneck Rifle Cases.
Check Stock

Diablo AvantiPRO 3/16\ x 4\ Carbide Tipped Masonry Drill Bit

  • Carbide tip for durability and longer life in masonry applications.
Check Stock

CRAFTSMAN Recessed Lighting Installation Kit 6-3/8-Inch CMAH36RL

  • 6 3/8" Carbide grit hole saw drills through hard, abrasive material.
  • Segmented cutting edge for fast drilling speed.
  • Dust shield collects debris while drilling overhead for improved visibility and a clean workspace.
Check Stock

3 Pieces Nail Drill Bits Set, Nail Carbide 5 in 1 Bit, Tapered Barrel Carbide Nail Drill Bit, 3/32 Inches Cone Shape Carbide Bit Carbide Nail Drill Bits for Acrylic or Gel Remover (Golden)

  • Practical nail drill bit set: the package includes 3 pieces different nail drill bits, including 1pc fine grit nail carbide 5 in 1 bit, 1pc fine grit tapered barrel carbide nail drill bit, 1pc Cone Shape Carbide Bit, which fit most nail drill machines that use 3/32 inch bits, meet your different nail art and manicure demands.
  • Nail carbide 5 in 1 bit: this 5 in 1 bit adopts the multifunctional design, the roughness of the drill surface changes from top to bottom, which can be applied for different purposes, such as cutting dead skin, cleaning, smoothing or shaping the nail , practical to use.
  • This nail carbide can be rotated in 2 directions, so both left-handed and right-handed person can use it with ease.
  • Tapered barrel carbide nail drill bit: this type of nail drill bit features tapered shape with a flat top design, suitable for nail trimming and surface work, convenient and efficient to use, can help you complete various nail work, such as engraving, polishing , reshaping, polishing, removing gel nails or dead skin, very suitable for surface work, filling preparation, epidermal and sidewall preparation.
  • Cone Shape Carbide Bit: our cone shape carbide bit has a slender tapered design.
  • The top of the tapered drill can be applied to trim the surface and s....
Check Stock

3 Pieces Nail Drill Bits Set, Nail Carbide 5 in 1 Bit, Tapered Barrel Carbide Nail Drill Bit, 3/32 Inches Cone Shape Carbide Bit Carbide Nail Drill Bits for Acrylic or Gel Remover (Silver)

  • Practical nail drill bit set: the package includes 3 pieces different nail drill bits, including 1pc fine grit nail carbide 5 in 1 bit, 1pc fine grit tapered barrel carbide nail drill bit, 1pc Cone Shape Carbide Bit, which fit most nail drill machines that use 3/32 inch bits, meet your different nail art and manicure demands.
  • Nail carbide 5 in 1 bit: this 5 in 1 bit adopts the multifunctional design, the roughness of the drill surface changes from top to bottom, which can be applied for different purposes, such as cutting dead skin, cleaning, smoothing or shaping the nail , practical to use.
  • This nail carbide can be rotated in 2 directions, so both left-handed and right-handed person can use it with ease.
  • Tapered barrel carbide nail drill bit: this type of nail drill bit features tapered shape with a flat top design, suitable for nail trimming and surface work, convenient and efficient to use, can help you complete various nail work, such as engraving, polishing , reshaping, polishing, removing gel nails or dead skin, very suitable for surface work, filling preparation, epidermal and sidewall preparation.
  • Cone Shape Carbide Bit: our cone shape carbide bit has a slender tapered design.
  • The top of the tapered drill can be applied to trim the surface and s....
Check Stock

WICHEMI 10PCS TCT Hole Saw Kit Tungsten Carbide Tipped Hole Cutter Set Heavy Duty Hole Saw Hole Cutting Drill Bit for Stainless Steel Copper Iron Aluminum Iron Metal Plate 5/8\ to 2-1/8\ inch

  • ...mm(7/8”), 25mm(1”), 28mm(1-3/32”), 35mm(1-3/8”), 38mm(1-1/2”), 45mm(1-3/4”), 50mm(2”), 53mm(2-1/8”). The package contains 10pcs pilot drill bits and 2pcs L-shaped hexagon wrench. A variety of sizes to meet your different needs..
  • 【Premium Material】- This hole saw is made from high quality tungsten carbide tipped cutters, ensures its high hardness, rust proof and wear resistance. Designed with precision ground, sharp tough gears and stepped pilot drill bit to drilling more precise, smooth, faster and safer, leave perfect cutting results..
  • 【Fast Cutting Speed】- The spring-type guide drill can eject the chips to make the cutter body cut clean and smooth, which not only saves cleaning time, but also shortens the cutting time. The speed of burr-free holes is faster than that of traditional twist drills or other hole saws, and has a greater advantage in cutting time..
  • 【Multipurpose Tools】TCT Drill Bit sets cut quick, precise holes in 28MM thickness metal material, they are industrial grade metal drilling hole cutter for stainless steel, mild steel, alloy steel, iron,copper, aluminum, castings, plastic and brass..
  • 【Wide Application】: TCT Carbide Steel teeth for fast cutting of clean and smooth round holes. The carbide hole saws se....
Check Stock