Top Carbide Insert Tool Holder

Toolly 3/8'' Shank 7 Pcs Indexable Carbide Turning Tool Set, Indexable Turning Tool Holder, C6 Carbide Inserts

  • Black oxided smooth finish on each turning tool holder style and shank size..
  • Each tool holder comes with a C6 TiN coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • Insert screws and wrench included. 7Pcs indexable turning tool holder. 7Pcs TiN coated C6 carbide inserts. 7Pcs hex screws. 3Pcs hexagon keys..
Check Stock

Accusize Industrial Tools 3/8'' Shank 7 Pc Indexable Carbide Turning Tool Set in Fitted Box, 2387-2003

  • Black oxided smooth finish on each turning tool holder style and shank size..
  • Each tool holder comes with a C6 TiN coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • Insert screws and wrench included. 7Pcs indexable turning tool holder. 7Pcs TiN coated C6 carbide inserts. 7Pcs hex screws. 3Pcs hexagon keys..
  • Details, recommended cutting speeds and specifications are in the description.
Check Stock

Accusize Industrial Tools 1\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0001

  • ... pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display....
Check Stock

OSCARBIDE 5/16

  • Mini Turning Tool holders with 1/16'' Shank, 5ps/set AL, AR, BL, BR, and E Tool Holders with 5 TCMT C-6 Inserts.
  • Multiple cutting surfaces available provide longer tool life,Carbide Inserts can be rotated to a new cutting edge without changing the position of the tool holder.
  • Positive rake cutting and built-in chip breaker groove,for Turning, Cutting, Facing, Boring, and Chamfering.
  • Carbide insert is coated with tin to provide long life and sharpness,higher temperatures than ordinary steel tools .turning tool holder is made of high-quality steel, coated with nickel for durability,moisture proof and resistant to rusting and corrosion..
  • 5pcs in a wooden case for safe storage, the carbide inserts replacement TCMT090204,please search the Asin B07SJX9YNR to buy it on amazon..
Check Stock

3PCS 5/8\ CNC Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 3pcs wnmg431, cnmg431, tnmg331 Indexable Carbide Inserts (Right Cutting)

  • ★Package Included:3pcs indexable carbide turning tool holder (MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 ).
  • 3pcs indexable carbide turning inserts (CNMG431 + WNMG431 + TNMG331).
  • ★Shank Diameter (length×width): (16*16mm ≈ 5/8"x5/8" ).
  • Overall Length:(100mm ≈ 3-7/8" ) ,Cutting Direction:right hand..
  • ★The material of the turning tool holder is 40Cr steel, black oxide smooth finish on each turning tool holder marked with tool holder style and shank size..
  • ★The material of the insert is carbide,the inserts can be used for finishing or semi-finishing steel, the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability..
  • ★If you need more matching insert or 5/8" left turning holder set, you can search for B07G386Y3B , B07Q1117MJ (inserts) or B07B8XNH98 , B07TTL32HW (holder).
Check Stock

1/2'-28 Threading Alignment Tool (TAT) Stainless Steel Die Starter for .22 / .223 - Gunsmithing

  • Material : Steel (turning holder) + Carbide (turning insert).
  • Package : 1PC SER2020K16 + 1PC SEL2020K16 + 2PCS 16ER/IR AG60 BP010 + 2PCS WRENCH T15.
  • Black oxided smooth finish on each turning tool holder style and shank size..
  • Each tool holder comes with a carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • Blades exquisite workmanship, high strength, high toughness, stable and durable. If you need more 16erag60 or 16irag60 inserts ,please search for ASIN : B07FFR8K53 , B07FFPFT93.
Check Stock

GBJ SRDPN2020K10 (20mm*125mm) + RPMT10T3 45° Lathe Turning Holders Lathe Turning & Profiling Tool Holder for Round Carbide Inserts RPMT10 RPMT08 (SRDPN2020K10 + R5 Inserts)

  • OSCARBIDE Turning Insert Holder TSDNN 2020K 12, Square Shank,Rigid Clamp, 125mm Length,10.3 Width.
  • TSDNN 2020K 12 is a new T-type double style tool holder,it can be accurately, strongly clamp the carbide insert,which is the upgraded style of DSDNN 2020K 12 turning holder.
  • Turning holder is made of Nikel Coated HSS,carbide insert is made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Our External Turning Holder which using the newly developed new double clamping structure, The clamping plate is designed with positioning, anti-turning function and high clamp Tight and rigid, high positioning accuracy, high stability, reliable Now the blade is fast, strong, accurate clamping, is straight The best choice for hole negative Angle blade clamping..
  • Used for external turning, roughing to finishing, but also for internal turning when chip evacuation is good..
Check Stock

33 Pieces Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 30 CNMG 431 + WNMG 431 + TNMG 331 Metal Indexable Carbide Turning Insert Blades

  • Package: you will receive 3 pieces 5/8 inch lathe indexable carbide turning tool holders, 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 3 pieces carbide inserts and 10 pieces CNMG 431,10 pieces WNMG 431, 10 pieces TNMG 331 metal indexable carbide turning insert blades, cufficient quantity and easy to replace.
  • Material: lathe indexable carbide turning tool holders are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability.
  • Size: diameter of the handle is (5/8 x 5/8 inches/ 16 x 16 mm).
  • Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and accuracy have reached the first grade.
  • Easy to store: insert 30 pieces of cemented carbide into 3 boxes, and put them in a plastic container, safe and easy to store, compatible with MTJNL1616H16, MWLNL1616H08, MCLNL1616H12 or MTJNR1616H16, MWLNR1616H08, MCLNR1616H12.
Check Stock

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • ... pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display....
Check Stock

1/2\ CNC Lathe Carbide Indexable Threading Turning Tool Holder SER1212H11 with 10PCS 11ER A60 BP010 Indexable Carbide Turning Insert

  • Material : Steel (turning holder) + Carbide (turning insert).
  • Package : 1PC SER1212H11 + 10PCS 11ER A60 BP010 + 1PCS WRENCH T8.
  • Black oxided smooth finish on each turning tool holder style and shank size..
  • Each tool holder comes with a carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • Blades exquisite workmanship, high strength, high toughness, stable and durable..
Check Stock

IRONWALLS Carbide Wood Lathe Turning Tools Set, Carbide Tipped Turning Chisels for Lathe Include Finisher, Rougher, Detailer, Carbide Lathe Tools Woodworking with Interchangeable Handle & 8PCS Inserts

  • 【Complete Wood Turning Chisels Carbide】IRONWALLS carbide tipped wood lathe turning tools set for woodworking includes 1 x 11.2” Interchangeable grip handle, 1 x 10.6” Extension Rod, 4 x 9.6” stainless steel arbor shafts, 2 x round inserts, 2 x square inserts, 2 x diamond inserts, 2 x square circle inserts, 1 x T15 wrench, 1 x L-shape wrench and beautifully packaged in an easy-to-store & carry aluminum box..
  • 【Adjusted Freely for Different Applications】Designed with a small lock on the lathe tool handle and coming with a removable extension rod, you can adjust the length of the shafts and the overall length of the carbide lathe tools woodworking freely. Furthermore, this wood turning lathe kit includes 4pcs shafts with 8pcs carbide inserts, which does not need to frequently change inserts in complex turning tool projects so that improving the working efficiency..
  • 【Rotatable Blade Insert Design】Per piece of carbide insert tip is designed with four indexable tungsten carbide edges, which are sharp, solid and wear-resistant. When one edge of the cutter head is blunt, you can turn it to a new edge, which makes the blade can be used for a longer time, money saving. Furthermore, there are 8pcs carbide wood lathe tools blade inserts replacemen....
Check Stock

OSCARBIDE Carbide Turning Inserts MGMN200,11ER A60,WCMT2.5,CCMT060204,DCMT070204 CNC Lathe Insert for Indexable Lathe Turning Tool Holder Insert Replacement 7 Pieces

  • Insert: Grooving Insert MGMN200,External Threading Inserts 11ER A60 ,Turning Insert WCMT050304(WCMT2.521),CCMT060204(CCMT21.51),DCMT070204(DCMT21.51).
  • Material: made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Designed for Steel, cast iron and non-ferrous materials.
  • Used for turning and finishing on a wide range of materials.
  • 7 pieces Carbide inserts for replace our 1/2” or 3/8” Lathe turning tool holder set , or other brand same size holder, you can search Asin: B07PLYG1Y4 or B07MDC5LMX and buy tool holders.
Check Stock