Top Carbide Lathe Tools

FJL FORCE Lathe Tools Set of 4, Mirror Polishing Wood Lathe Tools Latest Version Carbide Lathe Tools, Carbide Turning Tools, with Diamond Round Square Carbide Inserts

  • 【PRODUTCS INCLUDE】 - Carbide lathe tools including:(1)11" handle(2)7.9" wood turning tools including square,round,diamond,rounded(3)easy to replace the cutting head of the T15 wrench,all parts are made of special hard sponge full fit wrapped and placed in a packaging box..
  • 【REFUSE TO LOOSEN】 - Some common wooden handle carbide lathe tools will feel a certain degree of looseness or even fall off at the connection between the handle and the tool bar after 25 to 30 days of use.In contrast,the high-quality aluminum alloy handle,stainless steel handle all-metal material,double insurance carbide turning tools fixing structure can free you from the worry of product sturdiness in full..
  • 【HIGH CUTTING EFFICIENCY】 - The sharp high-density tungsten lathe tools cutting edge allows you to confront the wood as if a hot knife cutting butter as simple and smooth,compared with other typical carbon and high-speed steel material cutting head more durable,if wood turning tools becomes dull,just use the included T15 wrench to change the blade direction,you will have a fresh,clean cutting edge again..
  • 【EASY TO CONTROL】 - Whether it is the frosted aluminum handle of the wood lathe ,or the high- speed steel material of the knife shank,the mirror polished f....
Check Stock

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • ... pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display....
Check Stock

DEEFIINE Carbide Tipped Wood Lathe Turning Tools Set, Lathe Rougher Finisher Swan Neck Hollowing Tools and Interchangeable 19.5"Soft Grip Handle with Diamond Round Square Carbide Inserts

  • Sharp and easy: Our carbide turning tools set can be used to quickly process any workpiece on your lathe. The wood lathe tool set can provide a smooth and clean cutting effect by four types of cutters designed for different grinding effects. This saves a lot of time when grinding and honing, because you can easily replace the blade when it becomes dull..
  • wood turning Tool kit: The high-quality CNC machining made of square stainless steel makes it stronger, harder and rolls less than round shaft tools. It has a square shaft so that the knife can be used with a flat back. Keep the shelf flat and flush with the floor。.
  • Ergonomic design: the turning tool kit is equipped with soft handle, fits comfortably in the hand,It has the characteristics of anti-skid, breathable, shock absorption, etc.
  • Easy to use: our woodturning tool makes the turning of wood considerably easier. This set of carbide rotary tools is very suitable for all levels of experience and makes wood turning faster and more interesting. Each lathe tool has two carbide tips with multiple sharp edges that can be rotated multiple times. Simply turn the knife head a....
Check Stock

14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench

  • ... pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display....
Check Stock

Indexable Lathe Turning Tool,3/4'' Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • OSCARBIDE 1/2"Shank Heavy-Duty Lathe Turning Tools Set including 1pcs each of SCLCR,SCLCL,SDJCR,SDNCN,SWGCR external turning holder, 1 pcs MGEHR grooving tool holder,1 pcs SER threading tool holder.
  • Turning Holders are made of high quality stainless steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general metal lathe cutting tools.
  • Carbide Cutters are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose metal lathes cutting action.
  • Metal Lathe Cutting Tools Overall Length: 4.
Check Stock

BestEquip Indexable Carbide Lathe Tools 1/2" Metal Lathe Cutting Tools 7 Pcs/Set Indexable lathe tools Super-Hard 40CR Lathe Bits Carbide Lathe Tool for Lathe Black Compact and Portable

  • Indexable &Sharp Inserts: 90°, 93°, 55°&95°carbide lathe inserts allow this lathe threading tool cutting with more flexibility and utility. Sharp,straight and even ccmt inserts can ensure high precision cutting..
  • Super-Hard 40CR Body: 40CR material of these lathe cutting tools has much higher hardness, so stable cutting is achieved due to its superior toughness and crack resistance..
  • Additional Subassemblies: This Lathe tool set comes with 2 installation wrenches in different type:3mm Allen wrench and T15 box spanner. A set of assembly screws and one 95°CCMT09T304 blade are free to provide much convenience to lengthen the service life of these metal lathe cutting tools..
  • Extensive Use: These metal lathe tools can be applied to digital-controlled lathe with various sizes, processin....
Check Stock

ASZLBYM 5/8\ 36PCS Indexable Carbide Lathe Turning Tool Insert Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with CNMG 431 + WNMG 431 + TNMG 331 Indexable Carbide Turning Insert Blades

  • 【High Precision】- These carbide lathe tools with different angles can cut out any model you want with high precision. Practical lathe tools set can meet any of your cutting needs..
  • 【Free Accessories】- The metal lathe tool comes with some installation accessories: 2 wrenches, 2 socket wrenches, 7 screws and a precision blade. It is very convenient to provide you with assembly and disassembly services..
  • 【40CR Material】-These cutting tools for milling machines are made of hard 40CR material. No need to worry about it breaking or deforming during use..
  • 【Portable Storage Box】- The size of this storage box is 2.7’’*0.39’’*0.39’’ and the weight is 1.4LB. You can store them in this box in an orderly manner when you do not need to use these tools. So your Workbench will become clean and tidy..
  • 【Widely Used】- These Indexable Carbide Tools is widely used in various product processing.heavy rough cutting and other fields of processing..
Check Stock

OSCARBIDE 1/2\ Shank Nickel Plated Indexable Lathe Turning Tool Holder 7 Pieces/Set,CNC Heavy-Duty Metal Lathe Cutting Tools for Turning Grooving Threading Parting Cut Off Holders Set

  • ❤This carbide lathe turning set Includes two 95° bits (SCLCR 3/8-2 and SCLCL 3/8-2), one 93° bit (SDJCR 3/8-2), one 90° bit (SWGCR 3/8-2.5), one 62.5° bit (SDNCN 3/8-2), one flat threading bit (SER 3/8-2) and one grooving bit (MGEHR 3/8-2). Recommend for CNC and traditional milling machines..
  • ❤Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general metal lathe cutting tools. The set is used for semi-finishing/roughing steel , metal , great for turning, grooving or threading..
  • ❤Each tool holder comes with a TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action. And swap out or rotate the indexable carbide tips to maintain a sharp and precise cut..
  • ❤Metal lathe accessories designed for easy material removal, perfect for aluminum, brass, bronze, cast iron, steel, stainless steel, plastic, titanium and more.The entire set is contained in a premuim aluminium storage case that protects and organizes each tool and stacks and stores easily..
  • ❤TJATSE is a leading manufacturer of production cutting tools for industry. Our goal is to provide to our customers cutting tools that are On Spec and On Time and tha....
Check Stock

DEEFIINE Carbide Tip Wood Lathe Turning Tool Kit, Lathe Roughing and Finishing Hollow Tool Interchangeable Aluminum Alloy Handle with Diamond Round Square Carbide Blade (Metal handle)

  • Sharp and easy: Our carbide turning tools set can be used to quickly process any workpiece on your lathe. The wood lathe tool set can provide a smooth and clean cutting effect by four types of cutters designed for different grinding effects. This saves a lot of time when grinding and honing, because you can easily replace the blade when it becomes dull..
  • wood turning Tool kit: The high-quality CNC machining made of square stainless steel makes it stronger, harder and rolls less than round shaft tools. It has a square shaft so that the knife can be used with a flat back. Keep the shelf flat and flush with the floor。.
  • Rotary cutter design: the indexable carbide tool blade can be rotated or replaced to provide new cutting edge when needed..
  • Ergonomic design: the turning tool is equipped with 1pcs frosted handle that fits comfortably in the hand. In addition, it is equipped with an extension handle that can be used in deeper scenes, aluminium oxide alloy handles for grip, comfort and durability. making it a safe choice..
  • woodturningTools and Accessories - 1pcs handle and 1pcs extensi....
Check Stock

Savannah Carbide Tip Turning Tool Large Size Round Cutter

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. The Savannah Large Carbide Turning Tools are designed with ease of use in mind.....
  • All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of....
  • To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The....
  • The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2” from the butt to the stainless steel....
  • The round tool measures appx. 6-9/16" from the tip of the cutter to the ferrule.
Check Stock

Savannah Carbide Tip Turning Tool Large Size Square Cutter

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. The Savannah Large Carbide Turning Tools are designed with ease of use in mind.....
  • All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of....
  • To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The....
  • The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2” from the butt to the stainless steel....
  • The square tool measures appx. 6-9/16" from the tip of the cutter to the ferrule.
Check Stock

OSCARBIDE 5/8”Shank 9 Pieces/Set Indexable Carbide Lathe Turning Tool Holder and Boring Bar,CNC Heavy-Duty Nickel Plated indexable Insert Holders for Turning Grooving Threading Cut Off

  • 5/8” Metal lathe cutting tools includes 1pcs External Parting&Grooving Tool Holder QA10R-30 , 6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S10R-SCLCR Boring Bar.
  • Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general lathe tool holder.
  • Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action.
  • Metal Lathe tools suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal.
  • All metal lathe cutting tools and inserts packed in a premuim aluminium carrying case,easy to carry.
Check Stock