Top Carbide Sleeve

HEMUNC 3pcs Oscillating Tool Blades for Grout Removal Tile Mortar Concrete Masonry 1/16, Fit for Dewalt Milwukee Rockwell Bosch Dremel Ryobi Ridgid Multitool

• ✔Super Value Grout Removal Blade For Oscillating Tool: contains 3pcs 3-5/8 Inch Half-moon carbide grout removal blade which is a great multitool blade attachment for cutting on fillers, tile adhesive, concrete, mortar, ceramic grout and soft stone. The Semicircle carbide oscillating grout blade allows you to cut into concrete and defective tile joints with its sharp carbide grains..
• ✔ High Quality Blade For Oscillating Tool: HEMUNC oscillating carbide grout blades are made by Revolutionary Carbide Technology, robust and durable, which works great for back splashes, wall to floor joints in showers etc., the carbide grit lasts up to 2x longer than similar products in the market..
• ✔ Widely Use Range: This Universal Fit carbide grout oscillating blades is a wide use blade that quickly removes material such as grout, plaster and other adhesive products from floor or wall tiles during replacement or restoration projects, and the thickness of the carbide grit is 1/16", perfect for thicker grout removal, it may not work if you have narrow grout lines..
• ✔ Compatible With Most Oscillating Mulitools: This carbide oscillating grout blades set are compatible with the majority of the oscillating tool brands such as Dewalt Milwukee Rockwell Bosch Dremel Ryobi ....

PSI Woodworking LXPMSET Lathe Woodturning Ultra Carbide Chisel System

• Multi-function carbide chisel system that uses a single handle with three interchangeable, replaceable carbide cutter profiles.
• Includes: Chisel handle, 2" Radius Carbide Cutter (LXPMBS) and Carrier, 3/8" Round Carbide Cutter (LXPMBR) and Carrier, Diamond Carbide Cutter (LXPMBD) and Carrier, and all needed 3mm set screws.
• Also includes: Magnetic Chip Deflector (LXPMCD), 3mm Allen Wrench, Nylon storage and carrying case, and instructions.
• Tool length is 16" consisting of 11.5" handle and 4.5" blade.
• Flat bottom blade ensures straight, level cut along tool rest.
• Numbered edges on carbide cutters for consistent, reliable rotation.

DW KNVE RET

DB CARBIDE 4 8TPI 3PK SENS Multi 4 DS0408CF3

1 FORSTNER CARBIDE BIT

The Roman Spring of Mrs. Stone

• Made of green silicon carbide in a vitrified bond.
• Long service life because of hard silicon carbide.
• HIGH PERFORMANCE: PFERD Bench grinding wheels offer a high dimensional stability and abrasive performance for working with a large variety of materials and for many different applications.
• COMPATIBILITY: PFERD high-quality bench grinding wheels have been adapted to the standard bench grinders on market. Telescopic bushings for mounting on almost any bench grinder spindle are integrated.
• CARBIDE TYPE: CARBIDE type bench grinding wheels are used on hard materials, such as for sharpening tungsten carbide tools. Materials that can be worked are also glass or hardened, heat treated steels.
• LONG SERVICE LIFE: Dressing the disc on a regular basis exposes sharp grain and maintains an even grinding area. Constantly adjust the workpiece support to the wheel diameter, gap width max. 1/8''.
• DELIVERY KIT: 1 x PFERD Bench grinding wheel | Vitrified bond | CARBIDE type | 6'' dia. | 3/4" thickness | 1'' bore | Flat (type 1) | Green silicon carbide | 120 Grit | Max. RPM: 4,140 | EDP 61787.

DuraMark ChalkShot

• The tungsten carbide tip is mainly made of metal tungsten and carbon through sintering.The finished tungsten carbide has the characteristics of high hardness and wear resistance..
• The handle of the tungsten carbide scriber is made of aluminum alloy, so it feels very comfortable to use and achieves a perfect balance in terms of weight. What's more, the handle also has a knurled design, which can provide precise control even if the palm is sweaty..
• The powerful magnet at the end of the tungsten carbide scriber can help you easily retrieve excess iron filings from the complex engraving patterns..
• Thanks to the clip in the carbide scribe, you will never lose your scriber again. At the same time, the carbide scribe is also the ideal size for your pocket.
• Warranty:You would enjoy lifetime warranty from the date of your purchase..

Fowler 52-253-004-1, Premium Outside Inch Micrometer With 3-4\ Measuring Range

• Micrometer Screw Gauge: With flat anvil/spindle pair for general purpose measuring.
• microfine graduations and carbide-tipped measuring faces.
• 0.001" graduation and ± 0.001" accuracy for precise readings.
• Accurate Measurements: Anvil and spindle hardened and precision-ground with microlap finish on tips.
• 0.256" diameter of measuring faces, 0.00003" flatness, and 0.00008" parallelism on 3-4" micrometers for accurate measurements.
• Easy to Use: Quick, easy zero adjustment on the sleeve and positive lever locking clamp.
• friction thimble with ratchet stop applies constant force for repeatability between users.
• Satin Chrome Finish: Vernier scale with hammertone blue baked-enamel frame with heat-insulated frames.
• the finishing on the thimble and sleeve helps reduce rust and glare, while the lapped spindle thread provides smooth movement, extending product life.
• Set Includes: An outside micrometer with a vernier scale of 0.001.

Fowler 52-229-214-0 Economy Outside Micrometer Set with 0–4 Range (Set of 4)

• Micrometer Set: With flat anvil/spindle for general purpose measuring.
• microfine graduations and carbide-tipped measuring faces.
• High Accuracy Micrometer Set: Anvils and spindles are hardened and precision ground with microlap finish on tips.
• 0.256" diameter, 0.00003" flatness, and 0.00005" parallelism on 0 to 1" micrometer for accurate measurements.
• Easy to Use: Quick, easy zero adjustment on the sleeve and positive locking nut on spindle.
• Ratchet stop thimble applies constant measuring force for repeatability between users.
• Satin Chrome Finish: On the thimble and sleeve to help reduce rust and glare, lapped spindle thread that provides smooth movement and extends product life.
• Set Includes: Outside micrometers of 0 to 1 inch, 1 to 2 inches, 2 to 3 inches and 3 to 4 inches.
• 1 inch, 2 inches, and 3 inches standard, a wrench, and a fitted case.

Savannah Hollower Replacement Carbide Cutter for Savannah Hollower Carbide Turning Tools

• Carbide turning tools have a couple of advantages of standard turning tools. One of the most satisfying advantages is that we don’t have to sharpen....
• Carbide cutters will stay sharper for a longer period of time when compared to standard turning tools. When the carbide cutter finally dulls, simply....
• Carbide cutters don’t so much cut your wood or material like standard turning tools. The idea is that the razor sharp carbide shears the material to....
• This cutter comes with two screws that are sized for Savannah turning tools, but depending on your turning tool thread size, you may need to use the....
• While carbide cutters are designed to be disposed of when they are no longer sharp enough to cut into your material, you can sharpen these cutters by....

VEVOR Micrometer Set 0-6' Machinist Tool Micrometer Set 0.0001' Accuracy 6 Pcs Precision Machinist Tool Set Micrometer, Laser-Etched Micrometer with Calibration Standards, Wrench

• [ 6 Pcs Micrometer Set ]: Micrometer set includes 6 micrometers with measuring range: 0-6" (0-1"/1-2"/2-3"/3-4"/4-5"/5-6"),and microfine Graduations is 0.0001",also the accuracy is 0.0001",ensure a precise measurement every time..
• [ Calibration Standards & Wrench ]: The micrometer set comes with 5 calibration standards and 1 adjustment wrench,which provides you precise adjustment solutions..
• [ Precision Machinist Tool ]: It works with high accuracy of 0.0001'', Micro-lapped carbide tipped measuring face make more accurate reading,and the laser-etched graduations will never fade..
• [ Durable Material Micrometer ]: The outside micrometers are made of heat and corrosion resistant cemented carbide and cast Iron, which makes it work perfect in different condition. Satin chrome finish on thimble and sleeve is rustproof and reducing glare..
• [ Wide Application for Your Needs ]: This outside micrometer set is ideal for DIY, Hobbyists, CNC Machinists, Fabricators, Automotive Mechanics, and Inspection Tools etc,help you measure the outside dimensions of raw materials, whole workpieces and more of metalworking and other industrial measure needs..

KCHEX 20pc 3/8' Carbide Tip Tipped Cutter Tool Bit Cutting Set for Metal Lathe Tooling

• KCHEX’s lathe tools metal cutting are the perfect addition to your DIY and lathing tools collection. Whether you are a professional or recreational at lather, our lathe carbide bits are the perfect option..
• Every one of our 3/8" metal lathe cutting tools in this 20 pack is made out of top tier stainless steel and carbide and has maximum quality. Our carbide lathe set is extremely durable as well as easy to use..
• This lathe tool bits set contains 10 C2 and 10 C6 grade bits. Ultra useful for lathing steel and alloys. Simply fit them onto your lathe and create your dream designs. Purchase our carbide cutters for lathes and feel the SKEMIX difference!.
• The carbide tipped tool bits are a great tool for your shed or tool garage. Gain a huge advantage over purchasing these carbide tips individually. Purchase the set and gain a design advantage..
• Made out of reliable material, easy to use and clean, and providing perfect results in the garage, our carbide lathe tool tips are the way to go!.