Top Carbide Solid Tool

Yonico Router Bits Pattern Bit Solid Carbide Flush Trim Spiral 1/2-Inch Up-Cut 1/2-Inch Shank 31200-SC

  • This heavy-duty solid carbide up-cut flush trim router bit features a 1-1/4" cutting length with double guide bearings secured with a lock nut. The overall length is 3-13/16" with a 1/2" diameter and 1/2" shank..
  • Flush trim all types of material for a perfect finish.
  • Premium C3 micro-grain solid tungsten carbide for a high-performance industrial quality tool.
  • For use on table mount and handheld router.
  • Polished to a mirror finish from a solid carbide rod for precision & accuracy.
Check Stock

uxcell 1.75mm Solid Carbide Drill Bits Straight Shank for Stainless Steel Alloy Hard Steel, Hardened to 50 HRC, 2 Pcs

  • Specification: Diameter: 1.75mm / 0.07″.
  • Made of Solid Carbide (Tungsten Steel), Hardened to 50 HRC.
  • Applications: Widely Used on cast iron, non-ferrous alloys, high silicon aluminum, copper, plastics, hard rubber etc..
  • For Abrasive Materials: Designed for drilling abrasive materials when drilling accuracy must be maintained. Can be used in high temperature drilling applications.
  • Solid Carbide Tool: Offering long tool life and faster cutting speeds than other substrates, but is more brittle.
  • Please Note: Must be used with a rigid tool-holding systems. Fine grinding drill obtain accuracy and fine finish than other substrates.
Check Stock

uxcell 3.25mm Solid Carbide Drill Bits Straight Shank for Stainless Steel Alloy Hard Steel, Hardened to 50 HRC, 2 Pcs

  • Specification: Diameter: 3.25mm / 0.13″.
  • Made of Solid Carbide (Tungsten Steel), Hardened to 50 HRC.
  • Applications: Widely Used on cast iron, non-ferrous alloys, high silicon aluminum, copper, plastics, hard rubber etc..
  • For Abrasive Materials: Designed for drilling abrasive materials when drilling accuracy must be maintained. Can be used in high temperature drilling applications.
  • Solid Carbide Tool: Offering long tool life and faster cutting speeds than other substrates, but is more brittle.
  • Please Note: Must be used with a rigid tool-holding systems. Fine grinding drill obtain accuracy and fine finish than other substrates.
Check Stock

OSCARBIDE Carbide Inserts TPG322 Turning Inserts TPGN160308,Tin Coated for Lathes and Mills,10 Pieces/Box.

  • Indexable Carbide Milling Insert 1/8" Thick, 1/32" Radius,11 degree relief angle..
  • Carbide Cutters material: made of solid carbide with mutilayer coated, offer long life and faster cutting speed, low friction coefficient, good wear resistance.
  • Carbide Bits for turning and milling carbon and alloy steels, tools steel and stainless steel.
  • Screw on triangle style insert with a chip breake.
  • 10 pieces per box, provides longer tool life than uncoated grades.
Check Stock

TJATSE Carbide Inserts MGMN200-G Grooving Inserts for MGEHR/MGIVR CNC Lathe Cut Off Turning Tool-5 Pieces/Pack

  • ♥Size Information: 5pcs MGMN200-G carbide insert: 6mm x 3mm x 2mm, fit for MGEHR / MGIVR grooving cut-off tool..
  • ♥MGMN200 Carbide Inserts made of solid carbide, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance..
  • ♥Specially designed chip breaker allows for narrower chips to promote better chip flow, great for grooving applications and can reduce the tool grinding cost and improve the cutting efficiency..
  • ♥ Tin coated universal grade is suitable for steel and cast steel continuous cutting and interrupted cutting finishing to roughing. Also enhanced the surface gloss of the cutting pieces..
  • ♥TJATSE is a leading manufacturer of production cutting tools for industry. Our goal is to provide to our customers cutting tools that are On Spec and On Time and that are made to your exacting specifications. We will provide you 100% satisfaction guarantee..
Check Stock

Upgraded Carbide Tipped Woodturning Tools Set, 6 IN 1 Lathe Rougher/Finisher/Dovetail/Swan Neck Hollower Wood Turning Tools, with Interchangeable Aluminum Alloy Grip Extension Handle and Wrench

  • Material:Tool bar：CNC machined 304 stainless steel,increase the stability and shock resistance；Handle：Ergonomics design makes it more comfortable while doing turning job；Carbide cutter：Tungsten carbide of high quality.
  • Indexable Replacement carbide insert design:matched with Round Carbide Insert (12×2.5mm-30°),many usable sides give you fresh edge for maximum cutter lif.
  • Handle：solid wood material，Ergonomics design makes it more comfortable while doing turning job.
  • Dimension: Tool Bar 8.27"(210mm) ，Head 2.36"(60mm)， Overall length 19.69"(500mm).
  • Easy to use:greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY.
Check Stock

CNC Spoilboard Surfacing Router Bit, 1/2\ Shank 2\ Cutting Diameter, Insert Carbide Slab Flattening Router Bit Planing Bit Wood Planer Bit by BINSTAK

  • 3-WING INSERT CNC ROUTER BIT: Shank: 1/2".
  • Carbide Inserts: 12*12mm. 3-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 3 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

CNC Spoilboard Surfacing Router Bit, 1/4' Shank 1' Cutting Diameter, Carbide Insert Slab Flattening Router Bits Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK

  • 2-WING INSERT CNC ROUTER BIT: Shank: 1/4″.
  • Carbide Inserts: 12*12mm. 2-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 2 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

CNC Spoilboard Surfacing Router Bit, 1/4\ Shank 1-1/2\ Cutting Diameter, Carbide Insert Slab Flattening Router Bits Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK

  • 2-WING INSERT CNC ROUTER BIT: Shank: 1/4".
  • Carbide Inserts: 12*12mm. 2-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 2 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

Simple Woodturning Tools 3 Carbide Wood Turning Tools with Rougher Finisher Detailer & 12 Color Coded Solid Aluminum Lathe Tool Handles USA Made

  • These high quality carbide turning tools are American made by Harrison Specialties in Ramsey, Minnesota, a family owned CNC machining and....
  • Easy tool selection with color coded solid aluminum handles. Each CNC machined powdercoated turning tool handle is 1-1/8" outside diameter by 12"....
  • Carbide turning tools feature ultra-sharp replaceable tips, which have multiple sides that can be rotated. Replacing or turning the cutters is easy....
  • Designed with a 3/8" square shaft making it easy to keep tools flat on the tool rest. Overall turning tool length is 9"..
  • Greatly simplifies woodturning with no need for any sharpening equipment..
Check Stock

Yonico Router Bits Pattern Bit Solid Carbide Flush Trim Spiral 1/4-Inch Down-Cut 1/4-Inch Shank 14120

  • Flush trim all types of material for a perfect finish.
  • Premium C3 micro-grain solid tungsten carbide for a high-performance industrial quality tool.
  • For use on table mount and handheld router.
  • Polished to a mirror finish from a solid carbide rod for precision & accuracy.
Check Stock

GBJ MWLNR 1616H08 5/8\ Lathe Turning Holder + 10PCS WNMG431 Carbide Turning inserts, SER1212H16 SER 1/2\ External Threading Holder +10pcs 16ER 3/8\ AG60 Threading inserts

  • MTJNR 12-3C Right Hand Turning Tool Holder,3/4”Shank ,5” Length ,negative 3 degree lead angle..
  • Turning holder is made of HSS,carbide insert is made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Indexable Turning Holders use with TNMG, TNMA, or TNMM-32 style negative inserts.
  • MTJNR 12-3C Lathe Tool Holder,93 degree,clanping& Tool style for turning.
  • MTJNR 12-3C indexable tool holder for external contouring, profiling and facing from light roughing to finishing.
Check Stock