Top Carbide Tip

PSI Woodworking LCWIZSK Carbide Wizard Super Skew Chisel

  • All the benefits of a traditional skew with the results of a carbide tipped chisel. Overall length is 13. 5". Blade is 4" long. Includes a wrench for the tip screw and instructions. Replacement tip screw and wrench (LCWIZSY) are available..
  • Gentle 2" Radius edge and angled blade works closer to the slicing action of a traditional skew, lowering the stress on the turning material and tool. Slices through wood or acrylic for smooth, clean cuts. Reduces chipping. Less sanding needed..
  • Super sharp 4-sided replaceable carbide tip (LCWIZSX). ergonomic handle. Will wiz through wood and acrylic for faster results and eliminate the need for sharpening. The angled blade provides a consistent holding position..
  • Designed to solve a recurring issue with carbide chisels.
  • almost all carbide chisels are scrapers..
  • While the blade on a scraper maintains a sharp edge, the method of holding the blade causes the edge to drag across surface of material, which can promote tool chatter, chipping, and shattering of turning materials..
Check Stock

DEWALT Masonry Drill Bit Set, Percussion, Concrete & Block, 7-Piece (DW5207)

  • 2 cutter carbide tip of masonry drill bit set maximizes carbide surface contact for longer bit life..
  • Four flute design cleans debris out for fast, efficient drilling.
  • Three flats on shank eliminate bit slipping in chuck (except DW5232, DW5233, DW5237, DW5238).
  • Rock carbide tip maximizes carbide surface contact for longer bit life.
  • Four-flute design cleans debris out for fast, efficient drilling.
  • Three flats on shank eliminate bit slipping in chuck.
  • For use with electric or cordless hammerdrills.
  • Ideal for drilling holes in brick, block, concrete, and masonry.
Check Stock

Diablo by Freud DMARG1220-S5 5 pc SPEEDemonâ„¢ Red Granite Carbide Tipped Hammer Drill Bit Set (5-Piece)

  • Diablo made carbide tip withstands impact and high heat applications for superior life versus standard masonry hammer drill bits.
  • Multi-ground Grip Point Tip delivers stability and accuracy required for fast, precise holes. More holes per charge in cordless impact and drill drivers. Maximum performance in hammer or rotary drilling applications..
  • Hi-performance brazing and hardening process extends life of carbide tip and increases productivity. Optimized flute design removes dust faster, keeping the carbide tip cooler for ultimate strength and durability..
  • Set features 5 bits: (1) 5/32” x 4” x 6”, (1) 3/16” x 4” x 6”, (1) 1/4” x 4” x 6”, (1) 5/16” x 4” x 6”, (1) 3/8” x 4” x 6”.
Check Stock

Bosch TCHC9 SDS-plus® Universal Concrete Screw Installation 9 pc. Kit

  • Fast-drilling Bulldog SDS-plus bit design – with a carbide tip, brazing process and centric tip for rapid rotary concrete drilling.
  • Bosch-made carbide tip – deliver outstanding durability under heavy loads.
  • Upgraded flute design – aggressively pulls dust away from hole, for faster and cooler drilling.
  • Centric conical tip – ideal for drilling anchoring holes, the centering tip provides precise starts.
  • Hex drive on bit fits into driver sleeve – features a 1/4 In. hex shoulder for a drive sleeve used to set masonry screws.
Check Stock

Sewline Mechanical Fabric Pencil, Pink

  • Value Package: 2 pcs 2.0mm carpenter pencils, 1 pcs Carbide Scriber, 2 tube Graphite Lead Refills(HB, 12 per tube), 1 pcs color lead refills( yellow & red, 12 per tube), 1 pcs eraser, 2 pcs lead sharpener.
  • Mechanical Carpenter Pencils: Includes a comfortable metal threaded anti-skidding grip as well as a sharpener on the cap of each pencil. Strong and hard to be broken,great for drawing drafting Sketching.
  • Carbide Scriber Tool：Durable tungsten carbide tip and an knurled aluminum body,can easily handle hard materials including metal, tile, glass, ceramics, wood. Comes with tip cover to protect tungsten carbide point when not in use..
  • Portable : handy pen-style design with convenient pocket clip,ideal for carpenters, builders.
  • 100% RISK FREE PURCHASE: If you are not satisfied with Nicpro mechanical Carpenter Pencils Kit , we’re very happy to either provide a no-questions-asked Refund or Replacement. Order today risk free!.
Check Stock

Scribing Pen, Tungsten Carbide Tip Scriber Scribing Engraving Etching Pen DIY Engraver Etcher Tool Kit for Metal Glass Ceramics Stone Tile Wood Jewelry,with Clip and Magnet

  • 【Tungsten carbide tip】 Each scribe has a tungsten carbide tip, which is twice as hard as steel, with high quality and long service life. It is a durable manual scribe, which can be used to mark lines conveniently..
  • 【Portable】The marking pen is designed with a clip, which can be easily clipped in your pocket or bag, which is convenient for you to carry and use it anytime, anywhere..
  • 【Easy to use】No power required, and the size of the scribe is similar to a pen. Using it to scratch/mark the surface is like using a pen. Easy to control, smooth and clear strokes..
  • 【Accurate Marking】Compared with pencil or ink line, using this professional line drawing tool can make the line clearly visible, not easy to erase, and the mark is thin and accurate..
Check Stock

Urbansential Woodturning Bowl Gouge Set, 3 Pieces 22.5 inch Wood Lathe Turning Tools, 1/4 Flute, 3/8 and 1/2 with High Speed Steel Blades, Beech Handles Brass Ferrules, in Wooden Storage Case

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. The Savannah Large Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The Savannah Carbide turning tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head..
  • All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of time in comparison to steel tools. Once the cutter head is completely used, simply replace it with a new carbide cutter..
  • To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly..
  • The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2” from the end to the stainless steel ferrule. With the Savannah Large Carbide Turning Tool, you can get right to turning without all the fuss..
  • Set includes the Large Round (# 7537), Square (# 7538) and Diamond (# 7539....
Check Stock

Glieskir 2 Pack Tungsten Carbide Scriber with Magnet,with Extra 10 Replacement Marking Tip,Etching Engraving Pen for Glass/Ceramics/Metal Sheet

  • ✔2 Pack Tungsten Carbide Tip Metal Scriber Tool With 10 Free Replacements Marking Tip, Each Pen Tip Comes With A Protective Sleeve..
  • ✔The Pen Body Is Nade Of High-Quality Aluminum, And The Pen Tip Is Made Of High-Quality Tungsten Carbide, Sharp, High Hardness, And Strong Wear Resistance.
  • ✔The Magnet At The End Of The Tungsten Carbide Scriber Can Help You Easily Remove Excess Iron Filings From The Complex Carving Patterns, Or Help You Absorb Some Small Parts.
  • ✔Convenient Pen Design And Convenient Pocket Clip, Knurled Aluminum Handle Provides Maximum Control And Comfort..
  • ✔We Stand Behind 0ur Products 100% And Are Committed To Fulfilling Our Customers’ Needs. If You Are Unsatisfied With Your Purchase, Get In Touch With Us And We Will Be More Than Happy To Assist You..
Check Stock

【 New type】Mgtgbao Concrete Drill Bit Set, 10pcs Masonry Drill Bits Set Carbide Tip for Glass, Brick, Tile, Concrete, Plastic and Wood with size 3/16” (5mm),1/4” (6mm), 5/16” (8mm) ,3/8” (10mm), 1/2” (12mm).

  • 2 cutter carbide tip of masonry drill bit set maximizes carbide surface contact for longer bit life..
  • Four flute design cleans debris out for fast, efficient drilling.
  • Three flats on shank eliminate bit slipping in chuck (except DW5232, DW5233, DW5237, DW5238).
  • Rock carbide tip maximizes carbide surface contact for longer bit life.
  • Three flats on shank eliminate bit slipping in chuck.
  • Innovative tip reduces walking and increases accuracy.
  • Used primarily to drill holes for mechanical anchors, fits standard 3/8-inch and 1/2-inch chucks.
Check Stock

uxcell Cemented Carbide Twist Drill Bits 8.5mm Metal Drill Cutter for Stainless Steel Copper Aluminum Zinc Alloy Iron 6 Pcs

  • Cemented Carbide Tip: 8.5mm twist drill bits are made of cemented carbide tip for long service life, more sharp and durable than others.
  • Features: Milled U-flutes with deep-cut spiral delivers fast material removal. Suitable for drilling in tough metal, including heavy-duty abrasive alloy and hardened steel.
  • Use For: Drilling clean, accurate holes in sheet metal, steel, copper, brass, aluminum, plastic, wood, stainless steel and cast iron.
  • Use Note: Please use low speed when drilling and note the temperature of carbide tip is not too high for extending drill bit life.
  • Round Shank Design: Round shank twist drill bit can work with a electric drill (Excluding in the item)..
Check Stock

DuraMark ChalkShot

  • The tungsten carbide tip is mainly made of metal tungsten and carbon through sintering.The finished tungsten carbide has the characteristics of high hardness and wear resistance..
  • The handle of the tungsten carbide scriber is made of aluminum alloy, so it feels very comfortable to use and achieves a perfect balance in terms of weight. What's more, the handle also has a knurled design, which can provide precise control even if the palm is sweaty..
  • The powerful magnet at the end of the tungsten carbide scriber can help you easily retrieve excess iron filings from the complex engraving patterns..
  • Thanks to the clip in the carbide scribe, you will never lose your scriber again. At the same time, the carbide scribe is also the ideal size for your pocket.
  • Warranty:You would enjoy lifetime warranty from the date of your purchase..
Check Stock

5 PC 3/8'' Indexable Carbide Insert Lathe Turning Tool Bit + 10 Pc Tips COMBO

  • 5 PC 3/8'' indexable carbide insert turning tool bit set + 10 PC carbide tip combo.
  • 5 PC 3/8'' indexable carbide insert turning tool bit set specs:Shank Diameter: 3/8".
  • AL/AR Style 0 degree Lead, BL/BR Style 15 degree Lead, E Style 30 degree Lead.
  • 10 PC 3/8'' Inserts TCMT 2151 specs:Case overall dimension: 1-1/2''L x 3-3/4''W x 1/2''H.
  • Quantity: 1 set (5 pcs 3/8'' indexable carbide turn tool bit set + 10 pc carbide tips).
Check Stock