Top Carbide Tipped Hand Reamer Set

Straight Router Bit Double Flute Plunge Router Bit Carbide Tipped Woodworking Tool 1/4’’ Shank Cutting Dia. 1/4 inch

  • ✔ Carbide Tipped Straight Plunge High Production: 1/4’’ cutting diameter x 7/9 inch Cutting Height x 1/4’’ Shank.
  • ✔ Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Open-flute design promotes rapid chip clearance, necessary for high feed rates..
  • ✔ Cuts all composition materials, plywoods, hardwoods, and softwoods.
  • ✔ High quality carbide tipped provide superior wear resistance and sharp edges..
  • ✔ In choosing a straight bit for any application, always select one with the shortest cutting edges and the shortest overall length that will reach the required cut depth.
Check Stock

DIABLO Bi-Metal and Carbide Tipped Hole Saw Set (9-Piece)

  • The Diablo 9-Piece Hole Saw Kit features five hole saw cups (bi-metal and carbide tipped) and Diablo's four piece SnapLock PLUS mandrel system for quick and easy hole saw cup changes for maximum job performance. This new, high performance hole saw set delivers faster cutting performance and increased productivity versus standard bi-metal and carbide-tipped hole saws. Unlike anything on the market, Diablos hole saws and SnapLock Plus mandrel system simplify the attachment process for fast and efficient hole saw mounting. These radical new hole saws provide ultimate cutting length to bore deeper holes in a single pass.
  • and tool-free plug ejection and Variable Tooth Design for faster cuts..
Check Stock

Makita D-65486 10\ 100T Polished Miter Saw Blade, Ultra-Fine Crosscutting

  • ATAF (Alternate Top and Alternate Face) tooth design for ultra precision cutting.
  • Thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss.
  • Fully hardened and expertly hand-tensioned steel saw plates for true cuts.
  • Carbide tooth design for quality cuts and longer life.
  • Micro-grain carbide teeth are honed with up to 600 grit for a mirror finish.
Check Stock

Makita D-65464 10\ 60T Micro-Polished Miter Saw Blade, Smooth Crosscutting

  • ATAF (Alternate Top and Alternate Face) tooth design for ultra precision cutting.
  • Thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss.
  • Fully hardened and expertly hand-tensioned steel saw plates for true cuts.
  • Carbide tooth design for quality cuts and longer life.
  • Micro-grain carbide teeth are honed with up to 600 grit for a mirror finish.
Check Stock

Rockler Signmaking Router Bit Set (3 Pieces) – 1/4” Shank Router Bits for Sign Text, Fluting, & Other Effects – Router Bits 1/4 Shank Set Includes 2 V-Groove Router Bits, & Round Nose Router Bit

  • Router Bit Sign Making Kit: Get three of our most popular Rockler sign making bits in one convenient set! Our router sign making bits are carbide-tipped, with 1/4" shanks..
  • V-Groove & Round Grove Routing Bits: Our V router fluting bit & round nose bit are great for grooving in router templates for woodworking or for sign text, fluting, and other decorative effects..
  • Neat Cuts Every Time: Our router carving bit set includes one 60° V-groove bit, 90° V-groove bit, and a high core box bit for sharp, smooth carving. Final sharpening can be done with a 600 to 800 grit diamond wheel..
  • Wide Application: This carbide router set is truly versatile. Our woodworking signs router bits cleanly cut all types of wood material, such as MDF, hardwood, softwood, and particleboard..
  • What’s Included? This universal bit kit includes (1) 1/2" dia. X 5/8" high, carbide-tipped 60° V-groove bit, (1) 1/2" dia., 90° V-groove bit, and (1) 3/8" dia. x 3/8" high core router box bit..
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Straight Shank, Partial Flute Carbide 56018P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

15/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56069P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #3, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56068P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

13/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56065P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 3/8 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1 3/16\ Expansion Reamer, Carbide Tipped, Straight Shank, Partial Flute Carbide 56026P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 3/4 " flute length, Partial Flute Length Carbide.
  • 1" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1 7/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56080P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 2" flute length, Partial Flute Length Carbide.
  • Morse taper shank #4, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1 5/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56078P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 7/8 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #4, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock