Top Carbide Tipped Hole Saw

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • 102mm 4" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

HLOFIZI 2-1/8 Inch Carbide Tipped Hole Saw Multi-Material Hole Cutter for Wood, MDF, Drywall, Plaster, Fiberglass, 5X Faster, Green

  • Multi-Material Applications - 2-1/8 hole saw ideal for cutting hard wood, MDF, drywall, plaster, stucco, sheetrock. Not recommended for metal products.
  • High Efficient and Precise - With tungsten carbide tipped, cuts up to 5X faster than standard bi-metal hole saws, and make smooth clean holes. This hole saw can cut at an angle, and enlarge existing holes.
  • Easy plug removal - Optimized slot design for fast plug removal. Up to 2 inch depth of cut. Shank fits 3/8" chuck.
  • More Durablity - Heavy duty solid backing plate won't flex for accurate holes every time. This carbide tipped hole saw comes with arbor.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 2-1/8" hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our products.
Check Stock

HLOFIZI 6 Inch Carbide Tipped Hole Saw for Recessed Lights Multi-Material Hole Cutting Wood, Drywall, Plastic, PVC, Fiberglass, 5X Faster, Green

  • Multi-Material Applications - 6 hole saw ideal for cutting hard wood, plastic, drywall. Not recommended for metal products.
  • High Efficient and Precise - With tungsten carbide tipped, cuts up to 5X faster than standard bi-metal hole saws, and make smooth clean holes. This hole saw can cut at an angle, and enlarge existing holes.
  • Easy plug removal - Optimized slot design for fast plug removal. Up to 2-1/4 inch depth of cut. Shank fits 1/2" chuck.
  • More Durablity - Heavy duty solid backing plate won't flex for accurate holes every time. This carbide tipped hole saw comes with arbor.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 4 1/8" hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our products.
Check Stock

HLOFIZI 4-1/4\ Carbide Tipped Hole Saw for 4 Inch Recessed Lights and Dryer Vent, 4.25 Inch Hole Saws Cutting Hardwood, Drywall, Plaster, Ceiling Sheetrock, Fiberglass, 5X Faster, Green

  • Multi-Material Applications - 4-1/4 hole saw ideal for 4 inch recessed lighting, dryer vent, and cutting thick wood, drywall, plaster, sheetrock, plastic. Not recommended for metal products.
  • High Efficient and Precise - With tungsten carbide tipped, cuts up to 5X faster than standard bi-metal hole saws, and make smooth clean holes. This hole saw can cut at an angle, and enlarge existing holes.
  • Easy plug removal - Optimized slot design for fast plug removal. Up to 2 1/4 inch depth of cut. Shank fits 3/8" chuck.
  • More Durablity - Heavy duty solid backing plate won't flex for accurate holes every time. This carbide tipped hole saw comes with arbor.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 4-1/4" hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our products.
Check Stock

TCT Hole Saw Set, 16-53mm Tungsten Carbide Tipped Hole, 13 Pcs Carbide Hole Saw Kit with Titanium Plated Pilot Drill Bit for Stainless Steel, Metal, Iron, Wood and Aluminum

  • Safe & Durable: This carbide hole saw set uses variable teeth technology with 3 distinct cutting edge to balance the cutting and make the blades more durable, sharp and more efficient for cutting hard metal..
  • Fasting Cutting: Carbide technology and optimized tooth geometry make hole cutter cut fast in most applications. This carbide hole cutter can precisely cut very smooth holes due to the concentricity rate..
  • Wide Application: 1/2 inch cutting depth makes this stainless steel hole cutter easy to pass through thick material such as: thick metal, stainless steel, iron pipes, aluminum, brass and sheet metal plate..
  • QUALITY MATERIAL: Our hole saw set are Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), Top-grade Titanium-plated cemented carbide Teeth ensures its high hardness, rust proof, sturdy and durable..
  • PACKAGE INCLUDES: The package includes 13 Pcs carbide hole saw: 16mm(5/8”), 18mm(45/64”), 20mm(25/32”), 22mm(55/64”), 25mm(63/64”), 26mm(1-1/32”) 28mm(1-7/64”), 30mm(1-3/16”), 35mm(1-3/8”), 40mm(1-37/64”), 45mm(1-49/64”), 50mm(1-31/32”), 53mm(2-3/32”). A variety of sizes to meet your different needs..
Check Stock

HLOFIZI 4 Inch Carbide Grit Hole Saw for Recessed Lights and Dryer Vent, Cuts Through Stucco, Ceiling Old Plaster, Drywall, Cement Board, Hard Wood with 1-1/2\ Depth, Up to 6X Faster

  • 4 inch hole saw ideal for installing recessed lighting, dryer vent hole, and other roof vent.
  • Drilling holes through lots of abrasive materials, ceiling stucco, old plaster, drywall, hard wood, plywood, sheetrock, cement board, plastic, PVC. Not recommended for cutting metal sheet, brick, concrete block, cement tile.
  • Constructed with long-lasting tungsten carbide grit edge, 4 in. hole saw easy and fast cuts thick wood, plaster stucco ceiling & wall. Cutting depth 1-1/2 inch.
  • Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Hole saw arbor: fit 3/8" chuck.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 4" carbide hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Check Stock

LDEXIN 38mm/1.5 Inch Carbide Tipped Hole Saw Carbide Hole Cutter Drill Bit for Cutting Metal Plate, Iron, Hard Wood

  • 【Package Content】 1Pcs Stainless Steel Hole Saw in a pack.
  • 【High Quality】 Carbide Tipped Hole Saw Tooth Drill Bits, made of Carbide Metal, give fast and easy cutting. Sharp gears and anti-cutting with lower consumption make the product a long service life.
  • 【Perfect Design】 It has an ejection spring for easy plug ejection, along with a raised shoulder helps prevent break through. The hole saw has a twist drill bit inside, which is undetachable.Specially used on metal and steel plate, give fast and easy cutting.
  • 【Wide Application】 Carbide teeth for fast cutting of clean, round holes,you can easily to drill on the thin stainless steel plate, iron, steel, castings, aluminum alloy and other metal plate drilling.
  • 【Service Guarantee】 LDEXIN guarantee high quality and good service. If you are not satisfied, we offer a 100% money back guarantee. No questions asked. Because we want you to be happy!.
Check Stock

7 Pcs TCT Hole Saw Kit, Tungsten Carbide Tipped Hole Cutters Set Heavy Duty for Stainless Steel Hard Metal Wood Plastic, Dia Size 3/4” 7/8” 1” 1-1/8” 1-1/4” 1-3/8” 2”, with Extra Pilot Drill Bits

  • Cutting Holes in 7 Different Sizes: Package includes 7 Hole Saws in most popular sizes - 3/4” (19mm), 7/8” (22mm), 1” (25mm), 1-1/8” (29mm), 1-1/4” (32mm), 1-3/8” (35mm), and 2” (50mm), cutting perfect holes for conduit and pipes.
  • TCT Hole Saw Kits for Hard Materials: This Set of Tungsten Carbide-Tipped Hole Cutters can cut precise holes in a lot of materials, such as stainless steel, mild steel, copper, iron, FRP, aluminum, wood and plastic with thickness up to 1/5” (5 mm).
  • Double Pilot Drill Bits for More Holes: Each hole saw kit includes 1 Hole Saw, 1 Hex wrench and 2 Pilot Drill Bits.
  • Starting with lower torque and lower speed, using cutting oil as lubricant will ensure clean holes and also prevent bit from getting burnt or broken.
  • Designed for Tough Jobs: All the Hole Cutters built with carbide tipped teeth and 3/8” 3-Flatted Shank, allowing a strong and steady chuck grip for heavy duty hole cutting applications.
  • compatible with drills, impact drills and CNC drilling machines.
  • Well Organized and Rust-Resistant: Each hole cutter kit is oiled and packed in a Semi-Transparent plastic carrying case for rust-resistant & well-organized storage and easy access.
  • Please feel free to contact us if you have any problem in using the Hole Cutte....
Check Stock

IRWIN Tools Polycrystalline Diamond-Tipped Fiber Cement Circular Saw Blade, 7 1/4-inch, 4-Tooth (4935473)

  • Polycrystalline, diamond-tipped teeth provide longer circular saw blade life.
  • Circular saw blades last up to 15x longer compared to standard carbide-fiber cement blades.
  • Circular saw blade creates less dust compared to a standard carbide-fiber cement blade.
  • Cuts up to 9,000' or 5 stacks of fiber cement.
Check Stock

ASNOMY Tungsten Carbide Tipped Hole Saw Drill Bit for Hard Metal, 3/4 Inch T.C.T Hole Saw Cutter with 2pcs Titanium-Plated Pilot Drill bit for Metal, Steel, Iron, Wood, Plastic

  • 【Top Quality】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
  • 【Size】Cutting diameter：3/4Inch, Cutting Depth: 1Inch, Shank Dia.: 2/5 Inch(10mm) , perfect for drilling Hard Metal.
  • 【Unique Three-blade Design】 This TCT hole Saw teeth designed with Three-blade, Include outer blade, middle blade, and inner blade, making it sharper and more efficient, ideal for cutting hard metals.
  • 【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • 【High precision and Easy to Use】TCT Carbide Steel teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
  • 【Package】Include 1pc T.C.T Hole Saw Cutter and 2pcs Titanium-Plated Pilot Drill bit，each hole cutters are individually cased in plastic box and each bit is also oiled (Prevent rust)..
Check Stock

RYOBI Drill and Impact Drive Kit (95-Piece) with Carry CASE

  • KIT INCLUDES: 19 x Split Point Oxide Drill Bits, 1 x 1” Hex Shank Spade Bit, 4 x Carbide Tipped Masonry Drill Bits, 4 x Brad Point Drill Bits, 1 x 2-1/8“ Hole Saw, 1 x Hole Saw Mandrel, 5 x Hex Shank Nut Setters, 20 x 1” Insert Bits, 1 x Magnetic Bit Holder, 1 x Countersink, 1 x Center Punch, 1 x Hex Key, 1 x Carrying Case.
  • BLACK OXIDE COATING keeps some of these bits protected from corrosion and prolonged wear.
  • HOLE SAW MANDREL holds a hole saw and drill bit in place so you can bore holes for door knobs or locks with a power drill.
  • MAGNETIC BIT HOLDER holds drill bits for driving fasteners without a tool.
  • CARRYING CASE has mounting brackets and a handle for maximum storage and portability.
Check Stock

ASNOMY Tungsten Carbide Tipped Hole Saw Drill Bit for Hard Metal, 4 Inch T.C.T Hole Saw Cutter with 2pcs Titanium-Plated Pilot Drill bit for Metal, Stainless Steel, Iron, Wood, Plastic

  • 【Top Quality】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
  • 【Size】Cutting diameter：4 Inch (100mm), Cutting Depth: 1Inch, Shank Dia.: 2/5 Inch(10mm) , perfect for drilling Hard Metal.
  • 【Unique Three-blade Design】 This TCT hole Saw teeth designed with Three-blade, Include outer blade, middle blade, and inner blade, making it sharper and more efficient, ideal for cutting hard metals.
  • 【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • 【High precision and Easy to Use】TCT Carbide Steel teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
  • 【Package】Include 1pc T.C.T Hole Saw Cutter and 2pcs Titanium-Plated Pilot Drill bit，each hole cutters are individually cased in plastic box and each bit is also oiled (Prevent rust)..
Check Stock