Top Carbide Tips For Router

CNC Spoilboard Surfacing Router Bit, 1/4' Shank 1' Cutting Diameter, Carbide Insert Slab Flattening Router Bits Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK

  • 2-WING INSERT CNC ROUTER BIT: Shank: 1/4″.
  • Carbide Inserts: 12*12mm. 2-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 2 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

CNC Spoilboard Surfacing Router Bit, 1/4\ Shank 1-1/2\ Cutting Diameter, Carbide Insert Slab Flattening Router Bits Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK

  • 2-WING INSERT CNC ROUTER BIT: Shank: 1/4".
  • Carbide Inserts: 12*12mm. 2-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 2 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

Rockler Signmaking Router Bit Set (3 Pieces) – 1/4” Shank Router Bits for Sign Text, Fluting, & Other Effects – Router Bits 1/4 Shank Set Includes 2 V-Groove Router Bits, & Round Nose Router Bit

  • Router Bit Sign Making Kit: Get three of our most popular Rockler sign making bits in one convenient set! Our router sign making bits are carbide-tipped, with 1/4" shanks..
  • V-Groove & Round Grove Routing Bits: Our V router fluting bit & round nose bit are great for grooving in router templates for woodworking or for sign text, fluting, and other decorative effects..
  • Neat Cuts Every Time: Our router carving bit set includes one 60° V-groove bit, 90° V-groove bit, and a high core box bit for sharp, smooth carving. Final sharpening can be done with a 600 to 800 grit diamond wheel..
  • Wide Application: This carbide router set is truly versatile. Our woodworking signs router bits cleanly cut all types of wood material, such as MDF, hardwood, softwood, and particleboard..
  • What’s Included? This universal bit kit includes (1) 1/2" dia. X 5/8" high, carbide-tipped 60° V-groove bit, (1) 1/2" dia., 90° V-groove bit, and (1) 3/8" dia. x 3/8" high core router box bit..
Check Stock

HILTEX 10108 Tungsten Carbide Router Bit Set, Woodworking Tools and Accessories, 1/4-Inch Shank, 24-Piece Set, Red, Blue

  • WOOD ROUTER BITS: The HILTEX Tungsten Carbide Router Bit Set is the perfect addition to your woodworking tools and equipment. Each router bit in this 24-piece set is built with a tungsten material that performs clean cuts on your wood projects..
  • TUNGSTEN BIT SET: Every router bit is tipped with machined YG8 tungsten carbide blades that can trim, edge, and cut into all types of wood. Each bit in this compact bit set is heat-resistant to help prevent damage to your wood creations..
  • EASY COMPATIBILITY: Each bit features a universal 1/4-inch shank to allow it to work with any router tool. Select bits also have ball-bearing rollers for better alignment and smoother routing..
  • VERSATILE & POWERFUL: You can use each compact router bit for wood and carpentry applications like edging, trimming, veining, and grooving. Each piece is made of hardened, solid alloy steel and has a powder-coated finish for maximum durability..
  • WHAT'S INCLUDED: This set includes 24 tungsten carbide bits and a storage box. The storage box features labeled slots for each bit for easy identification and for storage and transportation from job to job.Please note that packaging may vary between two styles..
Check Stock

WEN RB001SF 1/8 in Straight 1-Flute Carbide-Tipped Router Bit with 1/4 in Shank

  • Professional-grade heat-treated HSS design includes carbide tips for a long-lasting sharp edge.
  • Features an 1/8-inch diameter, a 1/2-inch cutting length, a 2-inch overall length, a 1/4-inch diameter shank, and a max RPM of 28000.
  • Straight one-flute profile makes for perfect grooves and dadoes in your workpiece.
  • Part of the WEN Professional-Grade High Speed Steel Carbide-Tipped Router Bit series.
  • Compatible with handheld routers, table-mounted routers, and CNC machines.
Check Stock

WEN RB002SF 3/16 in Straight 1-Flute Carbide-Tipped Router Bit with 1/4 in Shank

  • Professional-grade heat-treated HSS design includes carbide tips for a long-lasting sharp edge.
  • Features a 3/16-inch diameter, a 1/2-inch cutting length, a 1-7/8-inch overall length, a 1/4-inch diameter shank, and a max RPM of 28000.
  • Straight one-flute profile makes for perfect grooves and dadoes in your workpiece.
  • Part of the WEN Professional-Grade High Speed Steel Carbide-Tipped Router Bit series.
  • Compatible with handheld routers, table-mounted routers, and CNC machines.
Check Stock

Freud 99-037 1-3/8' (Dia.) Finger Joint Bit, Perma-SHIELD Coating Red

  • Tips on each side of the bit are offset, cutting twice as many fingers as you see tips on each side of the bit..
  • Cuts all composition materials, plywoods, hardwoods, and softwoods..
  • Use on CNC and other automatic routers as well as table-mounted portable Router..
  • Ground carbide with titanium for long life.
  • Computer balanced for vibration free operation speeds over 22,000 RPM.
Check Stock

Vipbhtool 1/4 Inch Shank Spiral Flush-Trim Router Bits Milling Spiral Flush Trim Bit Router Bits Pattern Bit Solid Carbide Flush Trim CNC Down Cut Spiral Router Bits

  • 1/4 Inch Spiral Flush Trim Router Bits. Shank: 1/4 inch.
  • Spiral Flush-Trim Router Bits Solid Carbide Flush Trim Router Bit 1/4-Inch Shank Spiral Flush Trim Down Cut. The design down-cut sharp flutes would eject chips more quickly from the routing materials..
  • Can be used with handheld, table-mounted and CNC routers. Flush trim all types of material for a perfect finish. Cut half-round grooves for fluted moldings, columns, millwork and signs using a core box bit. The bit features high quality carbide for more efficient material removal. Each bit is manufactured from high quality steel for added durability and long life..
  • Made of Solid Carbide, Premium C3 micro-grain solid tungsten carbide for a high-performance industrial quality tool, provide precise, efficient cuts and offers extreme durability. Precison finish and micro-grain carbide could assure of good performance and long tool life..
  • Our Down Cut Spiral Router Bits Redesigned with permanent bearing retaining collar to reduce trimming mishaps. For use with soft & hard woods, ply-woods, composites, laminates, plastics and some non-ferrous metals. Perfect for edging, trimming, veining and grooving in all woodworking projects for both professional carpenters and hobbyists..
Check Stock

Amana Tool - 46202-K Solid Carbide Spektra Extreme Tool Life Coated Spiral Plunge 1/4 Dia

  • SPIRAL PLUNGE BIT – Make grooves and dado cuts in particleboard, plywood, and laminate with the spiral bit. The spiral-flute bits shearing action....
  • FOR USE WITH – Spiral router bit can be used with handheld, table-mounted portable routers, and as CNC machine router bits..
  • CUT CLEAN – Use the down-cut router bit for woodworking. Leaves a smooth edge on the surface. Excellent router bit for cutting Wood, Laminate,....
  • SOLID CARBIDE – Special solid carbide router bits made for long-lasting cutting edge performance and tool life. Our Spektra bits feature a....
  • INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in....
Check Stock

WORKPRO 15-Piece Router Bits Set, 1/4-Inch Shank Tungsten Carbide Router Bits for Woodworking, Solid Woods, Hard Woods, Chipboard, MDF, DIY, and Carpenter

  • 【VERSATILE ROUTER TOOL SET】The set includes 1/4 inch router bits set, that is dovetail bit, mortising bit, panel pilot bit, cove bit, 4* straight bit (1/8'', 1/2'', 1/4'', 5/8''), roman ogee, 2* cove box bit (R1/4'', R1/8''), 45-degree chamfer, flush trim, confer round, 90-degree "V" grooving bit and storage case.
  • 【SHARP&DURABLE】Carbide router tips head, precisely machined, sharp, and heat-resistant, last 80-90 percent longer than HSS bits. With two cutting edges, the router bits set surpass single-edge bits in making smooth cuts. The inclined angle facilitates the removal of wood chips.
  • 【SAFE FOR USE】These bits with plenty of metal behind each cutting edge.
  • Anti-kickback design prevents kickback caused by fast feeding and deep bites. What's more, the 1/4 inch shank bits provide greater stability and less vibration during operation.
  • 【EASY TO STORE&CARRY】Storage case with identification for easy access and organization. The case also helps protect the router bits while on the travel or during working time.
  • 【WIDELY APPLICATION】Effective for edging, trimming, veining, and grooving all types of wood.
  • perfect for door panels, picture frames, plywood, and other carpeting projects. Suitable for the hobbyist and for light work.
Check Stock

CNC Spoilboard Surfacing Router Bit 1/2 Shank 3 Cutting Diameter Carbide Insert Slab Flattening Router Bit Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK

  • 4-WING INSERT CNC ROUTER BIT: Shank: 1/2".
  • Carbide Inserts: 12*12mm. 3 inch larger cut diameter and 4-wing design, make more....
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 4 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The spoilboard surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use....
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoil board. Used on soft and hard woods,....
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming....
Check Stock

WEN RB107FF 1/2 in Straight 2-Flute Carbide-Tipped Router Bit with 1/4 in Shank and 3/4 in Cutting Length

  • Professional-grade heat-treated HSS design includes carbide tips for a long-lasting sharp edge.
  • Features a 1/2-inch diameter, a 3/4-inch cutting length, a 2-inch overall length, a 1/4-inch diameter shank, and a max RPM of 28000.
  • Straight two-flute profile makes for perfect grooves and dadoes in your workpiece.
  • Part of the WEN Professional-Grade High Speed Steel Carbide-Tipped Router Bit series.
  • Compatible with handheld routers, table-mounted routers, and CNC machines.
Check Stock