Top Carbide Tools

Authentic Simple Woodturning Tools Round Replacement Carbide Cutter for Full Size Simple Turner & Hollower (STH) or Simple Swan Neck Hollower (SSNH), Pack of 10

  • Authentic replacement super sharp carbide cutter for Simple Turner & Hollower (engraved STH) or Simple Swan Neck Hollower (engraved SSNH).
  • Simple Woodturning Tools are CNC machined to accept these exact carbide cutters..
  • Carbide stays sharp longer than steel, and these cutters can be rotated 1/4 turn several times before needing replacement..
  • Will not fit the mid size Simple Woodturning Tools (tools engraved with MSTH)..
Check Stock

WenCrew Carbide Tipped Wood Turning Tools Set, 2023 Upgrade Carbide Lathe Tools for Woodturning, Lathe Rougher Finisher Swan Neck Hollowing Tools with Extendable Shafts & Full Size Cutters Inserts

  • ▶▶▶ SAY GOODBYE TO SHARPENING ANNOYANCE: Upgrade premium carbide lathe tools are made with “Rotatable” tungsten carbide tip with sharp edge. Once the edge becomes dull, you can always rotate the bit to get a new, sharper edge. “ Sharper & Luster Cutter ” can offer better strength and durability to helps maintain edge persistence, to avoid constant sharpening..
  • ▶▶▶ HIGH STABILITY: High performance stainless steel arbor and aluminum oxide handles increase stability and shock resistance. Better shock resistant wood turning tools will ensure the handle will not loosen when vibrating, which will make you get a good cutting effect in safe operation(Heavy duty wood turning tools for lathe are less likely to roll and move on the tool holder than wood tools).
  • ▶▶▶ SIMPLE OPERATEION : Carbide wood turning tools allow both beginner and experienced turners to quickly start projects by reducing the learning curve associated with traditional turning tools. And our wood lathe tools bring you outstanding results, Ideal for lathe woodworking or DIY enthusiasts.
  • ▶▶▶ FAST HANDLE SWITCHING: Excellent reliable....
Check Stock

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • 152mm 6" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • 102mm 4" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

Simple Woodturning Tools Carbide Lathe Turning Tool Set of 3 Full Size with 17 Foam Grip Handles USA Made

  • American Made Set of 3 Full Size Carbide Lathe Turning Tools with Color Coded Handles: Hollower, Detailer & Rougher.
  • 17" long solid aluminum foam grip tool handles are color coded for easy tool identification. Overall tool & handle length is 26.5"..
  • This set of carbide lathe tools is ideal for turners at any skill level. With carbide it's all turning and no sharpening so you can begin turning....
  • Each lathe tool is 1/2" square CNC machined by Harrison Specialties in Ramsey, Minnesota. These tools are designed to be kept flat on the tool rest....
  • Each lathe tool features a carbide tip with multiple sharp edges that can be rotated several times. A Torx star wrench is included..
Check Stock

Diamond Nail Drill Bits Set - Ejiubas 7PCS Carbide Drill Bits Tungsten Acrylic Nail File Bits Cuticle Drill Bit 3/32 Inch Efile Nail Bit Fine Grit for Acrylic Gel Nails Cuticle Manicure Pedicure

  • 【Stronger Carbide Material & Highest Precision Standards】The Nail Drill Bits Set are made of hard metal with tungsten carbide, these nail file kits have the optimum strength, sharpness, durability, and the vibration-with a powerful cutting ability and free filing consistency you need, all while producing minimum friction which causes heat. To protect from overheating damage with heat resistance..
  • 【Professional Quality & Multi-functions Efile Nail Bits】This Drill Bits are sharpe and easy to use – cut your time in a half. With minimal filing needed to get the job done faster. Carbide drill bit are ideal nail art tools accomplishing diversified professional jobs such as carving, grinding, sharpening, sanding, polishing and so on..
  • 【7 Different Tools & 3/32″ Size】 This Nail Drill Kit comes with tungsten carbide drill bits 3pcs & diamond carbide drill bits 3pcs & Brush bit 1pc,so you could reshape,polish,smoothen,grind,sharpen,carve and neaten the gel nails or acrylic nails easily and quickly.Great nail tools for any professional manicurist or nail art beginner..
  • 【3pcs Tungsten Carbide Drill Bits】Great Cuticle Drill Bits to accomplish varied professional nail jobs,such as carving, engraving, grinding, r....
Check Stock

Savannah Carbide Tip Turning Tool Large Size Round Cutter

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. The Savannah Large Carbide Turning Tools are designed with ease of use in mind.....
  • All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of....
  • To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The....
  • The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2” from the butt to the stainless steel....
  • The round tool measures appx. 6-9/16" from the tip of the cutter to the ferrule.
Check Stock

Savannah Carbide Tip Turning Tool Large Size Square Cutter

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. The Savannah Large Carbide Turning Tools are designed with ease of use in mind.....
  • All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of....
  • To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The....
  • The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2” from the butt to the stainless steel....
  • The square tool measures appx. 6-9/16" from the tip of the cutter to the ferrule.
Check Stock

Savannah 3 Piece Carbide Mini Turning Tool Set with Flush Fit Comfort Grip Hardwood Handles | Heavy Duty Steel Riveted Ferrules and 2 ea Round 2 ea Square and 2 ea Diamond Shaped Carbide Cutters

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. We all know how "enjoyable" sharpening our turning tools can be. We also know....
  • When the carbide cutter on the tool finally dulls, simply loosen the cutter screw, rotate the tip and secure the screw for a fresh, clean cutting....
  • Unlike standard wood turning tools, when using carbide tipped cutters, you keep the cutter straight in on the object you are turning. This produces a....
  • Each mini turning tool has a Flush Fit Comfort Grip handle. Each handle is approx. 9-1/8" long and has a heavy duty steel ferrule for added strength....
  • The set includes 1 ea. round tool, 1 ea. square tool, 1 ea. diamond shaped tool, 2 ea. round carbide cutters, 2 ea. square carbide cutters, 2 ea.....
Check Stock

DEEFIINE Carbide Tipped Wood Lathe Turning Tools Set, Lathe Rougher Finisher Swan Neck Hollowing Tools and Interchangeable 19.5"Soft Grip Handle with Diamond Round Square Carbide Inserts

  • Sharp and easy: Our carbide turning tools set can be used to quickly process any workpiece on your lathe. The wood lathe tool set can provide a smooth and clean cutting effect by four types of cutters designed for different grinding effects. This saves a lot of time when grinding and honing, because you can easily replace the blade when it becomes dull..
  • wood turning Tool kit: The high-quality CNC machining made of square stainless steel makes it stronger, harder and rolls less than round shaft tools. It has a square shaft so that the knife can be used with a flat back. Keep the shelf flat and flush with the floor。.
  • Ergonomic design: the turning tool kit is equipped with soft handle, fits comfortably in the hand，It has the characteristics of anti-skid, breathable, shock absorption, etc.
  • Easy to use: our woodturning tool makes the turning of wood considerably easier. This set of carbide rotary tools is very suitable for all levels of experience and makes wood turning faster and more interesting. Each lathe tool has two carbide tips with multiple sharp edges that can be rotated multiple times. Simply turn the knife head a....
Check Stock

Diablo by Freud DOU3CS 3 pc Universal Fit Carbide Oscillating Blade Set (3-Piece)

  • 3-Piece set provides up to 40% in savings.
  • Includes: (1) DOU125CGP 1-1/4 in. Carbide Blade for General Purpose Cuts, (1) DOU275RCGP 2-3/4 in. Carbide Blade for General Purpose Cuts, (1) DOU125CF 1-1/4 in. Carbide Blade for Metal.
  • Universal interface design fits most tools, no adapters needed.
  • Maximum performance in cordless and corded oscillating multi-tools from Bosch, Craftsman, Dewalt, Dremel, Fein, Hart, Makita, Milwaukee, Porter-Cable, Ridgid, Rockwell and more.
Check Stock

Accusize Industrial Tools 1\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0001

  • ... pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display....
Check Stock