Top Carbon Bushing

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed includes LS1 LS2 LS3 LQ9 LQ4 Rocker Arm Support Pedestal Stands.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts and Pair of Rocker Arm Support Pedestal Stands ..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater sur....
Check Stock

Orion Motor Tech 52-in-1 Custom Bushing Driver Tool Set and Transmission Wheel Axle Bearing Race Seal Installer Remover, Bush Removal Puller Bearing Press Tool Kit

  • UNIVERSAL SIZING: This Orion Motor Tech bushing removal tool kit includes 50 interchangeable discs to build 2,450 custom bushing driver variations so you always have the right size for the job..
  • COMPLETE SET: The discs sizes range from 18mm (.7 inches) all the way to 65mm (2.51 inches) in 1mm increments plus 74mm (2.91 inches). All discs are connected with a 12mm (.47 inches) shaft and screw which quickly connects to a 180mm (7.08 inch) handle, making for a complete and effective wheel bearing driver set..
  • EASY OPERATION: This auto tool kit includes a long handle shaft to simplify bearing race and seal replacement and help you remove or install wheel bearings quickly and professionally..
  • HEAVY-DUTY DURABILITY: With ultra-strong carbon-steel construction and black anodic oxidation coating for rust-resistance, this mechanic toolset will stand up to years of heavy use..
  • PROTECTIVE CARRYING CASE: Includes a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..
Check Stock

Orion Motor Tech 52-in-1 Custom Bushing Driver Tool Set and Transmission Wheel Axle Bearing Race Seal Installer Remover, Bush Removal Puller Bearing Press Tool Kit

  • UNIVERSAL SIZING: This Orion Motor Tech bushing removal tool kit includes 50 interchangeable discs to build 2,450 custom bushing driver variations so you always have the right size for the job..
  • COMPLETE SET: The discs sizes range from 18mm (.7 inches) all the way to 65mm (2.51 inches) in 1mm increments plus 74mm (2.91 inches). All discs are connected with a 12mm (.47 inches) shaft and screw which quickly connects to a 180mm (7.08 inch) handle, making for a complete and effective wheel bearing driver set..
  • EASY OPERATION: This auto tool kit includes a long handle shaft to simplify bearing race and seal replacement and help you remove or install wheel bearings quickly and professionally..
  • HEAVY-DUTY DURABILITY: With ultra-strong carbon-steel construction and black anodic oxidation coating for rust-resistance, this mechanic toolset will stand up to years of heavy use..
  • PROTECTIVE CARRYING CASE: Includes a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..
Check Stock

Bushing Fix UP1KIT - Transmission Shift Cable Bushing Repair Kit

  • Kit includes replacement bushing and application specific installation tools..
  • Text and video instructions along with tech support make installation very easy..
  • Used by many transmission and service professionalsDescriptionThe transmission shift cable linkage kit allows you to quickly and easily repair your shift selector cable by replacing the bushing or grommet. The patent pending coupling and custom molded replacement bushing ensure a quality repair with ease. A professional can perform this repair in under 10 minutes, average time for a non-professional is less than 25minutes. This bushing is made from a material that was designed to outlast the factory bushing and includes everything needed to install. The kit includes DIY instructions, custom molded bushing, and patent pending installation tools. Works in 4T40-E, 4T45-E, and 4T65-E transmissions. This kit fits the following vehicles: Chevrolet Uplander.
Check Stock

DASBET 16PCS Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

  • 【Applicable】This inner bearing puller set is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing..
  • 【Instructions to operate】: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing.
  • Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight.
  • Repeat action until the bearing or bushing has been removed.
  • U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place..
  • 【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers..
  • 【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength an....
Check Stock

Factory Kimber 1911 45 or 9mm Bushing Wrench 1000112A

  • ESSENTIAL Multi-tool with everything you need to maintain and clean 1911 pistols and handguns..
  • QUICK DEPLOY Holster transforms, carries, and stores the multi-tool frame with tools, bit set and features a fold-out locking driver to accommodate....
  • INCLUDES Pin punch, bushing wrench, flat carbon scraper, metal file, pick, nut wrenches (4mm, 5mm, 1/4”, 5/16”), 2.6” drop point knife blade,....
  • COMES With bit set of 5/64” hex, 3/32” hex, 7/64 hex, T15, #1 phillips, 1/8” flat, 3/16” flat, ¼” flat, 9mm flat..
  • DURABLE Premium titanium & black oxide finishes make it a robust and elements-resistant carry tool..
Check Stock

Titan Complete Quick Hitch Bushing Kit for 3 Point Hitch Tractors Top Link and Lower Lift Pins

  • QUICK HITCH BUSHING KIT: This 3Pt bushing kit allows you to adapt your implement to fit quick hitches. Simply slide the bushings onto your lower lift pins and top link pin to reduce and remove spacing for a better, more secure fit..
  • MADE FROM COATED STEEL: Each bushing will be made from zinc coated steel. This coating prevents the steel from rust and corrosion, so you do not have to worry about the bushings breaking down over time..
  • SIX TOP LINK PIN ADAPTERS: This Quick Hitch Bushing Kit will include 6 total top link adapters. These adapters range in length and thickness to allow you to convert category 0, category 1, and category 2 top link pins to better fit your quick hitch..
  • EASY INSTALLATION: With this bushing kit, installation is a quick and easy. Slide the top link bushing over your top link pin and use the shoulder bushings on your lower lift pins. Secure the shoulder bushings using the included roll pins by hammering them into position..
Check Stock

SHIGA Skateboard Longboard Replacement Bushings Conical Cushions - 92A Resiliency

  • Keep your skateboard better and more comfortable.
  • Are you still worried about the squeaking of skateboards? Our skateboard bushing has rebound, which brings you a quieter and smoother experience..
  • The bushing kit consists of a tapered top bushing and a cylindrical bottom bushing..
Check Stock

TenPoint EVO-X Non-Lighted CenterPunch16 - 16\ Carbon Crossbow Arrows, Pack of 6 - With Alpha-Nock - For Use with Havoc RS440 & Siege RS410

  • CARBON CROSSBOW ARROWS - Constructed from modulus carbon fiber at 33 MSI and wrapped in an exclusive LAZER-TECH carbon weave, the EVO-X Non-Lighted CenterPunch16 is fletched slightly offset with 2.1” Q2i Fusion-II Vanes.
  • IMPROVED ACCURACY - CenterPunch arrows are inspected for straightness to within .001, each package is weight grain matched to within 1-grain/arrow & our brass insert adds more weight in the front, generating a 17.5% FOC & further improving accuracy.
  • ALPHA-NOCK HP - TenPoint’s Alpha-Nock features a deep groove & large smooth radius base to hold the bowstring in place & prevent “shoot-over” or “shoot-under”. Its HP Aluminum Bushing provides increased strength & accuracy.
  • 28% INCREASED STRING-TO-NOCK ENGAGEMENT - The string on TenPoint’s extremely narrow crossbows wraps tightly around the center of the Alpha-Nock resulting in straight nock travel & precision down-range accuracy, while minimizing string serving wear.
  • BETTER PENETRATION - Weighing in at 400-grains and measuring 16-inches long, these crossbow arrows provide the penetration and lethal accuracy needed for big game.
Check Stock

EdgeStar CWR302SZ 15 Inch Wide 30 Bottle Built-In Wine Cooler

  • PLEASE NOTE: 30 bottle capacity is ONLY achieved when ALL stored bottles are standard sized 750ml 2.75″ Bordeaux bottles, to accommodate larger bottles a shelf will need to be removed..
  • Digital temperature control w/ blue LED display.
  • Dimensions 32″ H x 15″ W x 23 3/4″ D.
  • Reversible double-paned tempered glass door.
  • Undercounter or freestanding application.
  • Rubber bushing absorbs vibration and noise from compressor.
Check Stock

MINORITY 32inch Maple Skateboard|Trick Skateboard for Beginners, Intermediate and Pros (America)

  • SOLID : 100% maple deck, 7-ply hardrock maple cold pressed into 32x8-Inch deck, Max support weight 224 lbs. Mediate concave makes it ideal for any tricks..
  • STRENGTH : 5-Inch trucks are casted by genuine alluminium alloy, equipped with carbon steel kingpin and 82A high rebound PU bushing..
  • SPEED : ABEC-9 precision bearings are forged by chrome steel, work with 52mm 106A PU wheels. Fast speed is half success for tricks..
  • SMOOTH : Rest your heart when cutting corners. The boards has passed maneuverability test on streets, ramps, and pools..
  • STYLE : Strikingly attractive graphics range from trendy to vintage, make boards ideal choices as gifts..
Check Stock

MINORITY 37inch Maple Skateboard|Trick Skateboard for Beginners, Intermediate and Pros (Snake)

  • SOLID : 100% maple deck, 7-ply hardrock maple cold pressed into 32x8-Inch deck, Max support weight 225 lbs. Mediate concave makes it ideal for any tricks..
  • STRENGTH : 5-Inch trucks are casted by genuine alluminium alloy, equipped with carbon steel kingpin and 83A high rebound PU bushing..
  • SPEED : ABEC-9 precision bearings are forged by chrome steel, work with 52mm 107A PU wheels. Fast speed is half success for tricks..
  • SMOOTH : Rest your heart when cutting corners. The boards has passed maneuverability test on streets, ramps, and pools..
  • STYLE : Strikingly attractive graphics range from trendy to vintage, make boards ideal choices as gifts..
Check Stock