Top Carbon Steel Bearing

Thur amo 2 Jaw Bearing Puller, Adjustable Two Claw Pilot Remover Hand Repair Tool Carbon Steel Pump Pulley Remover Straight Type for Motorcycle Car Auto (2.5in - 35x45mm)

  • 【Adjustable Design】 The puller can be bilateral rotation, enable stretching size and working space. Two jaw with adjustable clamping depth, fit for different size gears and bearings.
  • 【Carbon Steel Material & Foring Process】 The bearing gear puller is made by carbon steel, and the tip of the mandrel undergoes a special heat treatment process to make it more solid and durable.
  • 【Reinforcement Equipment】 The bearing gear puller comes with hexagonal screw and thread, will not slip, used for tightening, high strength.
  • 【Professional Repair Tools】 This removal tool is particular for slide gears, pulley, and flywheel, making removal simple and without any damage. Give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps.
  • 【Wide Application】 Suitable for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, pump bearing, generator bearing, machine bearing and so on.
Check Stock

DASBET 16PCS Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

  • 【Applicable】This inner bearing puller set is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing..
  • 【Instructions to operate】: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing.
  • Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight.
  • Repeat action until the bearing or bushing has been removed.
  • U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place..
  • 【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers..
  • 【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength an....
Check Stock

ATP Blind Inner Bearing Puller Slide Hammer Set Hole Remover Extractor Set 5PCS

  • Premium Quality: The slide hammer puller set is constructed from drop forged steel with a fully chromed carbon steel slide hammer for maximum strength and longevity that resists rust and corrosion..
  • Specifications of The Bearing Puller Set: Overall length 15''/382mm, bearing extractor collets with internal capacity from 3/8"/10mm to 1-1/4"/32mm, bearing extractor 3/8"/10mm to 1/2"/14mm, 9/16"/15mm to 11/16"/19mm. 5/8"/18mm to 1"/25mm, 1"/25mm to 1-1/4"/32mm..
  • Great Function: Open clamps by turning handle clockwise to snug against the bearing, the blind bearing puller is great for pulling out evenly without damage the parts..
  • Wide Application: This pilot bearing removal tool blind hole bearing puller is ideal for pulling jobs,against the bearing for pulling out evenly without damage the parts, and perfect for professional and DIY use..
  • Storage Case: The slide hammer bearing puller is packed in a heavy-duty storage case with precision-sized compartments for every piece - great for storage and transport while lengthening....
Check Stock

Abu Garcia C3 Catfish Special Baitcast Round Reel

  • 3 stainless steel ball bearings + 1 roller bearing(6500 size).
  • 2 stainless steel ball bearings + 1 roller bearing (7000 size).
Check Stock

BRONSON SPEED CO. Raw Box/8 Skateboard Bearings - 1 Set

  • 1.HIGH QUALITY AND SMOOTH: KVENI skateboard bearing is made of high quality carbon steel and stainless steel ball ,the bearings of skateboard meet international ABEC standards, high quality, high speed , low friction, it will give you a smoother feeling..
  • 2.PRECISION FITMENT :The ball bearing size is 608s and measures 22mm (outer diameter) x 7mm (width) x 8mm (inner diameter/axle)and(8 pack of skateboard steel bearings). Able to fit perfectly with most of the wheels on the market..
  • 3.SCOPE OF APPLICATION：KVENI steel skateboard bearing make you enjoy longer spins for your skateboard wheels, mini cruiser, longboard, kick scooter, trike, inline skates, roller skates, fidget spinner and more..
  • 4.GREEN UNIQUE COLOR SEALS: This waterproof skateboard bearings easy to disassemble and clean and protection from dirt, rocks, dust, Pre-lubricated with speed oil to lengthen the life of the bearing and maintain precision..
  • 5.AFTER-SALE SERVICE：If your skateboard bearings have any quality problems, please contact us, we will offer you hassle free replacement or money back during the week. Fast delivery and 100% satisfaction guarantee, friendly customer support for you. Compare with similar items.
Check Stock

RUNCL Baitcasting Fishing Reel REMIEL, Baitcaster - Seamless Magnetic Brake System, 7.5:1 Gear Ratio, 10+1 Stainless Steel Ball Bearings, Sealed Drag, Lengthen Handle (Red, Right)

  • 10+1 Ball Bearing System: Including 10 stainless steel ball bearings and 1 dead stop anti-reverse bearing, can deliver incredibly smooth and offer exceptional corrosion protection in saltwater surroundings.
  • Forged Aluminum Alloy Spool: Equipped with lightweight aluminum alloy spool, allows you to spread the fishing line properly all over the spool, suitable for heavier lures and also lighter lures.
  • Seamless Magnetic Brake System: Constructed with 5 magnet beans for complete cast control, the RUNCL REMIEL baitcasting reel can work stable and smooth. Micro-adjustable magnetic system allows you to fine tune cast control to accommodate a variety of lures and fishing conditions, effectively reduce bird nests when casting into the wind.
  • Advanced Sealed Drag System: Loaded with 4 premium carbon fiber washers and 1 stainless steel arch-shaped washer. The arch-shaped washer increases contact area between carbon fiber washers and anti-reverse bearing, extends lifespan of carbon fiber washers, helps boost maximum drag by 20% (up to 17.6 lbs) and guarantees you a larger catch.
  • Enhanced Ergonomic Lengthen Handle: The enhanced lengthen handle (4in/10cm in length) helps save effort, promises unparalleled efficiency even when fighting with trophies, perfect for tourname....
Check Stock

1623-2RS Bearing 5/8 x 1 3/8 x 7/16 inch Sealed Ball Bearings

  • Material:High Carbon Chromium Bearing Steel.
  • 【High Quality】-The bearings is made of bearing steel for durability and resistance to rust, corrosion and deformity under heavy loads.
  • 【Feature】-Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads,and it has small friction and high-limit speed.
  • 【Strictly Shielded】-The bearing has shield to keep lubricant in and contaminants out.
  • protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan.
  • 【Application】-Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment,robotics,dental equipment, elevators, rolling mills, ship rudder shafts, aggregate crushers,skateboards, inline skates, and scooters, among others.
Check Stock

uxcell 10 Pcs Plain Oilless Bearing Sleeves Composite Bushing 10 x 12 x 10mm

  • Total Size : 10 x 12 x 10mm/ 13/32" x 15/32" x 13/32"(Inner Dia*Outer Dia*H).
Check Stock

ATPEAM 3 Jaw Inner Bearing Puller, Jaw Pilot Bearing Puller Auto Bushing Gear Extractor Wheel Bearing Puller Heavy Duty Automotive Machine Tool Kit for Car SUV

  • 3-Jaw Puller Set: Ideal for Automotive flywheel, Motorcycle wheel, Bicycle wheel, Pump bearing generator bearing, Machine bearing etc.
  • Premium Material: The 3-Jaw Bearing Extractor Puller is made of strong carbon steel with black Oxide finishing, high hardness, corrosion-resistant forged and heat treated steel jaws, can serve for long time.
  • Strong Puller Power: Structure design, gently turning the small wrench can produce a strong pull force.Removes all sleeve-type bearings with 1/2-2inside diameter..
  • Stable & Safe: The Blind Bearing Puller applies even pressure to preventing damage to bearings, also ensures stability during use.
  • Package Included: 1x 3-Jaw Inner Bearing Puller Tool. Size: 200x135mm. Wire rod length: 175mm. Bar length: 125mm. Arm length: 86mm..
Check Stock

Orion Motor Tech 3\ 4\ 6\ 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels (GD)

  • Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage..
  • Better Together: This professional or home tool kit includes three puller sizes to cover most applications: a 3 inch gear puller with a 2.3" reach and 3" max. spread.
  • a 4 inch gear puller with a 3" reach and 4" max. spread.
  • and a 6 inch gear puller with a 4.7" reach and 6" max. spread..
  • Versatile Reversible Design: Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside as needed..
  • 45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life..
  • Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that these gear pullers are backed by Orion Motor Tech's warranty and friendly customer service..
Check Stock

Abu Garcia C3 Catfish Special Baitcast Round Reel

  • 3 stainless steel ball bearings plus 1 roller bearing(6500 size).
  • 2 stainless steel ball bearings plus 1 roller bearing (7000 size).
  • Carbon Matrix drag system provides smooth, consistent drag pressure across the entire drag range.
  • Extended bent handle with power knob gives anglers additional torque and power for hard pulling fish..
  • 6 pin centrifugal brake gives consistent brake pressure throughout the cast.
  • Synchronized level wind system improves line lay and castability.
Check Stock

OrangeA Linear Rail 2X HGH 20-1500mm Linear Slide Rail + 4X Pillow Block Carriage Bearing Block Linear Guideway Rail for Automated Machines and Equipments

  • Complete Linear Rail Kits: This linear rail set includes 2pcs 59 in / 1500 mm long HGH20 rail shafts and 4pcs bearing pillow blocks. Sliding blocks are used cooperatively with rails, smooth sliding provided by the inside linear bearing..
  • High-Quality Steel Material: CNC parts linear rails are made of carbon steel, linear bearings are made of quality bearing steel with aluminum alloy housing. Surface chrome plating treatment beautiful anti-rust, high hardness, more durable.EEL MATERIAL】- Linear bearing rails made of quality bearing steel. Beautiful and anti-rust surface treatment ensures durability, high hardness, and stiffness..
  • Premier Linear Guiding System: Perfect combination of the main axle bearing rail and aluminum alloy support, which nicely stabilizes the original rail. Industrial-grade standard SBR block, with a high precision linear bearing inside..
  • Easy to Install: Conveniently install the linear rail by aligning the track with the mouth of the slide rail and pushing the slide rail until the slide rail completely falls. It's no need for maintenance..
  • Wide Application: The linear guide rail is widely used in automation machinery such as DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc. Also, applicable for....
Check Stock